Used Line Boring Portable for sale (14,634)

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Itsdpfsw D E Ubsx Ahvjd Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: good (used), Year of construction: 2018, functionality: fully functional, total height: 750 mm, total length: 900 mm, total width: 700 mm, overall weight: 150 kg, MSW FASER 30 TG BLUE LINE marking laser - Operating voltage: 230 V Isdpfx Ahjyuvgnevotd - Frequency: 50 Hz - Laser power: 30 W - Power consumption: 550 W - Table dimensions: 400 x 240 mm Note: The item must be collected between 05 and 07 May 2026 at a mutually agreed appointment. FCA D-74385 Pleidelsheim – loaded onto truck

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance Data This complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs. Production speed: 24,000 bph Primary application: Hot-fill juice Container handling: PET bottles Validated format example: 0.5L Manufacturing years: 2010 (core equipment), 2011 (palletizer) Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400) Line type: Blow, fill, cap, label, wrap, and palletize Configuration: Integrated continuous production with matched throughput across stations Advanced Automation & Control Systems The line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment. Isdpfx Aheyipa Revetd Centralized line control with coordinated drives for consistent throughput Operator-friendly interfaces for speed matching and format adjustments Safety guarding and interlocked access doors Emergency stop circuitry across critical stations Quick-change features to support format and product adjustments Production Line Integration Capabilities This second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats. Inline operation from blow molding to palletizing Compatible with PET cylindrical bottle formats; validated at 0.5L Hot-fill processing designed for juice products End-of-line shrink wrapping and palletizing for stable distribution packs Potential to adapt speeds and formats within the design envelope of each component Machine Condition & Maintenance History The line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment. Operational status: In production Core equipment years: 2010; palletizer: 2011 Well-known OEM components to support parts and service availability Operational Per...

Condition: used, Year of construction: 2008, BOTTERO TITAN BILATERAL LINE – Year 2008 Dimensions: 2200 x 3000 mm BOTTERO 228N-3M-BELT Minimum glass size: 230 x 230 mm Thicknesses: 3 ÷ 30 mm Speed: 1 ÷ 20 m/min (optional 1 ÷ 30 m/min) Minimal size power: 88.6 kW BOTTERO 224N-2M-BELT Minimum glass size: 230 x 230 mm Thicknesses: 3 ÷ 30 mm Speed: 1 ÷ 20 m/min (optional 1 ÷ 30 m/min) Itjdpoyuutajfx Ahvjd Minimal size power: 78.2 kW 2 transfers

Condition: good (used), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Booklet Maker The machine is fully operational and ready for production. Very low mileage. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100m Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g Power supply: 230V Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-200A 10.4″ color touchscreen Non-stop operation thanks to the mis-assembly ejection function Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/hour Weight: 500kg Stitching Wire-folding Two Hohner heads Up to 200 jobs can be saved in the machine’s memory. Additional options include wire feed control and a block stitching module. Horizon FC-200A Cutting thickness 4-5mm 230V power supply Weight 244 kg New trimmer design, stable operation with servo motors, and additional booklet guide. Touch panel for quick format changes. Isdpfeyur Nfox Ahvstd Reset the machine to a different format with a single click. The machine includes: LC-200 delivery, operating tools, spare parts, and documentation.

Condition: good (used), Hohner HSB 9000 Digital Booklet Making Line The machine is in very good condition and ready for production. Year of manufacture: 2019. Itsdsyur Emopfx Ahvod Only 0.4 million booklets have been printed. This is one of the newest Hohner models. The entire machine is set up from the control panel. Made in Germany. The ideal machine for efficient booklet production in a digital printing house. Touch panel for quick adjustments and wireless remote control. The machine comes with tools, spare parts, and documentation.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 04/2027, total length: 700 mm, total width: 600 mm, total height: 850 mm, input frequency: 50 Hz, type of input current: three-phase, power: 6.7 kW (9.11 HP), electrical fuse: 16 A, Dishwasher Model: R-Line 1500 Quick-ready system Iodpfx Aefffhwshvjtd Euronorm 500 2.4 liters of fresh water consumption 7 washing programs with 3 easy Rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Sequence / drain pump Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 700 x 850 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Ijdpshzbipjfx Ahvotd Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: Iedpfx Aheizxbisvstd - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: used, Powder coating line Includes: - Polyester-lined paint booth with 3x1m internal capacity - Equipped with an external door for painting - Inlet and outlet opening size for parts carousel: X - Side window opening size for painting: X - Drying oven 3x1m - Brand: SART - Model: HE - Power: 18,000W - Powder coating gun - Brand: X - Model: X - Carousel with roller carts for part transport (approx. 20 meters) - Cyclone for air and powder re-circulation (blue) - Powder filter with Telemecanique frequency inverter - Silent piston compressor (used) NUAIR + HERTZ dryer Itjdpjxgnpksfx Ahvsd - Silent piston compressor, brand Nuair, model AIRSIL 2, 5.5hp, 270L tank, 640L/min, 952 hours of use, year 2020 - Air dryer, brand Hertz, model HRD 40, single phase 220V *Installation dismantled and in storage at our premises. Sold as is.

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Itedpfx Ahoh Ryc Hjvod Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires Itodpfx Ahsv Hm A Tovjd - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll Itsdpfx Ahjvut Sdevod coil loop control Ultrasonic

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Itsdpfsyv Hzgex Ahved Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1600 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system 4. Gluing system 5. Auxiliary components, technical documentation, certificates Types of roofing panels produced on the technological line: Itjdsyv E Aiepfx Ahvjd - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. Itedpfx Ahjyv Ewmovsd The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: used, Year of construction: 2019, Year: 2019 Condition: operational - Still in production, inspection possible Configuration: - Automatic pallet exchange - When a pallet is completed, the system automatically ejects it to the side output and feeds a new pallet from the infeed track - Automatic sheet feeding and counting - Automatic jogging and aeration - Automatic air removal from the pile - Automatic feeding into the airboard loader - Automatic loading of airboards - Automatic unloading of the pile onto a pallet, including airboards Basic functions of the BASA system: - Automatically loads materials from a pallet - The transport system allows sequential loading from 2 pallets arranged in line; the empty pallet is automatically ejected - Counts / deducts the exact number of sheets Ijdpfeyv Eppox Ahvetd - Jogs, aligns, aerates, and presses the piles - Places jogged piles onto separator cardboard - Subsequently separates piles using an airboard - Unloads piles onto a pallet - The BASA system only requires an operator to input or select a job in the system and to supply full pallets and remove empty ones - In off-line mode, the system can “feed” 2–3 cutting machines depending on the material used and pallet loading quality Technical specifications: - Max. format: 770 × 1070 mm - Min. format: 700 × 650 mm - Sheet counter: GTS

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Itedpjx S Egmofx Ahved Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Automatic glass cutting line for automatic cutting of semi-jumbo glass sheets to size. Straight and shape cutting, X;Y;Z axis. 2 position glass sheet loading unit Roller transmission Air cushion glass handling by turbine. Automatic oil feed. Optima (Italy) Optimisation software with hardware key. Low-E coating removal system! Breaker table for time efficient cutting. On request, we can undertake the complete commissioning of the machine and training of the staff! The machine is fully inspected and can be viewed in operation! Iodpfxexb N R Se Ahvotd VERY SPECIAL BARGAIN PRICE!!!

Condition: new, Year of construction: 2026, Feeding capacity: 40 [kg]. Capacity: up to 240 [bulbs/min]. Raw material size: 45 - 120 [mm]. Total width of the machine : 1700 [mm] Iedpfx Aoq Edcgohvotd Total height of machine : 2200 [mm] Total length of machine : 9500 [mm] Number of working paths: 4 Loading height of onion: 1000 [mm] Height of onion pick-up: 850 [mm] Height of waste pick-up: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz]. Installed power: 3 [kW] Compressed air connection: 8-10 [bar]. Air consumption: 1.9 [m3/min]. Noise level: Above 80[dB] Construction material: Acid-resistant steel and plastics approved for food contact CE certificate: yes Cutter: Yes

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Isdpsyvz Afsfx Ahvstd Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Suitable for: Row drilling Cabinets Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Vertical: 80 mm Max. clamping height: 92 mm Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Iedpfeyulftex Ahvstd Weight approx. 340 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Type: DS 6001.20P De conventionele plaatbewerkingslijn DS is ontworpen voor zeer efficiënte boren en plasmasnijden, met de mogelijkheid tot automatische plaatinvoer en automatische sortering van onderdelen bij de uitvoer. De machine is speciaal ontworpen voor zware toepassingen in constructiestaal, zoals de productie van zeer nauwkeurige fittingen, hoekplaten en eindplaten. Plasma: - 3D plasma-afschuurkop voor recht snijdend en schuin snijden tot +-50° - Hypertherm XPR 300 (doorboring 45 mm) - Maximale plaatgrootte: 6000 x 2000 mm - materiaaldikte: 3 30 mm - laserlicht Plasmamarkering Boren: - MG-40 P26 boorapparaat ISO 40 - boorbereik: diameter 4 40 mm - draad: M4 M33 - maximale dikte: 100 mm - slak: 400 mm - 26 kW op spindel ISO 40 - max. 1829 tpm - automatische gereedschapswisselaar; 8 gereedschapsposities ISO 40 Itedpsyuk Sxefx Ahved - externe en interne gereedschapskoeling CNC-besturing: iMSNC-systeem voor Windows® 10TM' 64-bit PRO met geïntegreerde netwerkkaart en USB-poort Met een vacuümzuigsysteem kunnen platen op de snijtafel worden geladen Totaalgewicht: 30 ton Benodigde ruimte: 16 500 x 7100 mm

Condition: excellent (used), Pellet line The line consists of: - CPM 7932-5 355kW granulator - Palletizer with automatic TMG wrapper - Essegi automatic packaging machine Itsdpfx Ajwcdndehvjd - Tanks and transport system consisting of many redlers and screw feeders - 355kW GT Zesor AG Beater Mill - Control cabinets - High-capacity sawdust sifters - Pellet sifter - Redlers and screw feeders Line with full documentation Line serviced until the end of operation with many spare parts

Year of construction: 2021, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, CODI DPL - 250 DEPALLETISER LOWERATOR 6 HEAD COUNTER PRESSURE FILLER AND SEAMER NITRO DOSER Itedpfxoxtavvs Ahvsd SET FOR 250 ML CANS, CHANGE PARTS now decommisioned, ready for shipping