Exhausting

Höcker Polytechnik Standard

Condition: used, Mobile extraction unit Ppsdpfxozk N D Do Amyew Second-hand Technical specifications to follow Availability: at short notice Storage location: Röllbach

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Ppsdporx Sydefx Amyew Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW Psdpspgmqijfx Amyopw weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: ready for operation (used), length 6000 mm Pjdpfxoud Il Sj Amyjpw width 2500 mm total power requirement / kW Without PC and software Dimensions (L×W*H): 6000 × 2500 x 350 mm, without vacuum plate Manufactured according to DIN 876 / class II

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Ppedpfxsxaa Dgj Amyew Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, total height: 2,200 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 200 kg, warranty duration: 12 months, Extraction system for double mitre saws or saws used in the aluminium sector, e.g. Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici etc. If you are looking for a powerful and quiet extraction system, you have come to the right place. Alternatively, a pre-control unit including a switch is available for your double mitre saw, which operates via a potential-free contact. The extraction system is perfectly suited for aluminium, PVC, and steel. Very powerful and extremely quiet extraction unit operating below 80 dB! 2600 m³ per hour extraction capacity 3 kW motor Ppsdpfx Amswii Hxjyew The extraction system includes a 14-metre hose with 2 outlets.

Year of construction: 2000, condition: ready for operation (used), A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Pedpeyb Scljfx Amyjpw

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Weight: 4500 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual Pjdpfxed Ad A Eo Amyepw • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Bernardo Motorized Sheet Metal Shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Max. sheet thickness * 3 mm Cutting angle 1° 30’ Strokes/min 31 Working height 810 mm Rear stop 0 – 750 mm Table width 390 mm Motor power 4.0 kW Width 2600 mm Depth 2100 mm Height 1260 mm Weight approx. 1710 kg * Material strength 400 N/mm² Features Equipped as standard with a sheet metal holding device, ideal for thin sheets Support arms on the front for easy processing of large sheets Motorized rear stop, precise adjustment via ball screws Clearly designed control panel with integrated control Robust steel sheet metal construction for vibration-free operation Support table with a right-angled stop on both sides High operator safety thanks to a protective cover and photocells on the rear of the machine 2-blade cutting knives made of high-quality steel guarantee clean and burr-free cutting Automatically acting clamping device for fixing the sheet Ppedpfxjd Hxnhj Amyew Scope of supply Cutting line illumination Motorized NC rear stop Front sheet supports Side stops Protective plate with photocells NC control BRL 401.2 Pneumatic sheet metal holding device Foot pedal with emergency stop Knives made of tool steel

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 Podpfx Amew Evq Ajyopw >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.