Used Line Boring Machine for sale (70,348)

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Iiedpfx Apspithajcsg Various tools Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Iisdpfx Apoxgic Ejcog Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Iisdpov Trlmsfx Apcjg Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Ijdpfxjunvg To Apcsig Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: used, Fälzelgerät / Back Lining Machine Schmedt  Fälzelgerät Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Iiodpfx Aotzc I Dspcjg On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2004, condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm Isdpfxjh Iy Rus Apcjig - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, Iedpfx Aot Hw Ayspcsig infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle Isdspqx H Tjpfx Apcsig type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, drilling depth: 2,250 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 1,600 mm, table width: 1,300 mm, table load: 20,000 kg, Deep Hole Drilling, Milling and Tapping Machine 5 linear axes X, Y, Y1, Z, W Rotary table axis B Equipped with 3D CAD simulation, WISE PLUS system, electrical cabinet cooling, and fume extraction system. Capacity Gun drilling capacity: 40 mm Table X-axis stroke: 2000 mm Ram Y-axis stroke: 1500 mm Column Z-axis stroke: 700 mm Spindle taper: ISO 50 – DIN 69871 Motor power: 22 / 33 kW Table size: 1600 × 1300 mm Technical Specifications Drilling diameter range: Ø 5 – Ø 40 mm Maximum drilling depth: 2250 mm Milling capacity with cutting tools up to: Ø 60 mm Drilling axis inclination: W -15° / +25° Milling capacity: 400 cm³/min Filtration and cooling system tank capacity: 2000 L Maximum pressure: 80 bar Direct gun drilling with guide bushings: up to Ø 20 mm Rotary table load capacity: 20,000 kg Positioning: 360,000 positions 9 T-slots 18 H12 P=140 Positioning accuracy: ± 0.2 sec Linear Axes Iiodpfx Apeyuc Rtocsg X: 2000 mm Y: 1500 mm Z: 700 mm W: 1630 mm

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Spindle nose attachment iso 50 X-axis stroke: 4000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Iisdovxvcaepfx Apcsg Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Year of construction: 2003, condition: good (used), - Build in 2003 - Type of strapping: Einfach- & Doppelumreifung / single, double strapping - max speed for single strap: bis zu 35 Pakete/min / up to 35 bundles/min - max speed for parallel (double) strap: bis zu 17 Pakete/min / up to 35 bundles/min - min bundle (package) height: ~10 mm - max bundle (package) height: ~450 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: ~850 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: PP - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with auto. height detection - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~760 mm - Over all width equipment: ~1540 mm - Over all height equipment: ~1600 mm Iiodpfxoh I Dlls Apcsg - Input Power: ~2 kVA - Voltage: 400 V 3Ph, 50/60 Hz - Air requirement: ~8l/cycle 6 bar - Weight: ~415 kg - Optional Equipment: Can be combined with a RO-TRI in-line strapper to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible - Condition: cleaned & in working conditions - Machine available: upon request - Description: Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages.

Condition: good (used), Year of construction: 1983, Pitch 32 mm Motor output 1,8 kW Weight 240 kg Iedpfx Apjzfqk Iecsig Number of boring spindles 21 St.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x2250x1650 mm Weight 2600 kg Ijdpfsvz Elisx Apcoig Total power requirement 11,8 kw

Condition: used, Year of construction: 1977, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 160 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 560 rpm, table length: 1,800 mm, table width: 2,000 mm, Manufactured by Union WMW (Germany) Year of manufacture 1977 Spindle diameter, mm 160 Iiodpfxsy Uw Afo Apcsg Face plate diameter, mm 950 Spindle speed range, rpm 2.8 – 560 X Axis Travel, mm 3600 Y Axis Travel, mm 3000 Z Axis Spindle Travel, mm 1000 W Axis Longitudinal Column Travel, mm 500 Rotary table size, mm 2000 x 1800 Rotary table longitudinal movement, mm 1250 Spindle motor, kW 22 Floor plate size, mm 3500 x 2000 (2 units) UNION BFP 160 is a heavy-duty floor type horizontal boring and milling machine manufactured by UNION Gera, Germany. Equipped with a 160 mm spindle, the machine is designed for precision machining of large and heavy workpieces in metalworking, energy, mining, and heavy industry applications. The borer is under power, fully complete and equipped with some tools.

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Iedpjfbt Huefx Apceig Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. Iodpfx Apozuynhocoig USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, spindle diameter 110 mm x-travel 2000 mm y-travel 1500 mm z-travel 1450 mm table surface area 1400 x 1600 mm taper ISO 50 spindle speed: 2 - 2500 Iiodpfoyuqhyjx Apcsg Control TOSNUC 7-3 total power requirement 22 kW

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Iodpfsxgu R Ijx Apcoig Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 1985, spindle diameter 130 mm Iiedpsyqvx Njfx Apcog x-travel 3500 mm y-travel 2000 mm z-travel 1250 mm w-axis 800 mm b-axis 360 ° spindle turning speed range 12,5-900 U/min Control Heidenhain type 155 table surface area 1800x1600 mm Table load 12000 kg spindle taper ISO 50 width of T-slots 22 mm T-slot - distance 160 mm Feed 1-6000 mm/min table rotating 360 ° total power requirement 80 KVA weight of the machine ca. 36 t dimensions of the machine ca. 7,7x7,2x4,9 m Refurbished 2005 Head extension Tool kit can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1986, x-travel 500 mm y-travel 360 mm z-travel 400 mm Control Siemens 810 tool taper SK 40 table surface area 800x390 mm T-slot - width 14H7 mm number of T-slots 6 T-slot - distance 63 mm turning speeds 20-4000 U/min transmission ratio 4 Iodsyt R Eiopfx Apcjig Feed 1-2000 mm/min rapid traverse 5 m/min total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Iiodpfxsqa Txqe Apcjg Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Year of construction: 1979, spindle diameter 130 mm x-travel 2750 mm y-travel 2500 mm z-travel 1050 mm w-axis 1000 mm Radial face slide diameter 800 mm radial face slide travel 240 mm table surface area 1800x2000 mm turning speeds 4,8-900 U/min workpiece weight 8000 kg faceplate speeds from - to 4,5-180 U/min Feed 5-2000 mm/min total power requirement 40 kW weight of the machine ca. 37 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Ijdpeyqv E Asfx Apcsig than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 2,000 rpm, table length: 1,100 mm, table width: 842 mm, X axis: mm 1.000 Y axis: mm 700 Spindle travel: mm 300 Table dimensions: mm 1.100 x 842 Spindle speed: rpm 40 – 2.000 Spindle cone: MT 4 Max power: kW 10 Max loading on table: ton 1 Machine weight: ton 15 Iijdpfjzizgbsx Apceg EQUIPPED WITH A LOT OF ACCESSORIES

Condition: good (used), Code: 0451 Brand: MCN - ITALY Model: JUNIOR - CE Standard Bit mortising machine for furniture, joinery, custom-made furniture, doors, shelves and various – CE standard Technical data: Table length 530 mm Table width 230 mm Table height from floor 800 mm Max groove length 200 mm Max groove depth 150 mm Vertical spindle stroke 200 mm Spindle attack 16 mm Spindle 2800 rpm Ijdpfxjzm Slpj Apcoig Motor power 2 Hp Pneumatic clamping device for workpieces Weight kg 160

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, CNC Table Type Boring and Milling Machine - Horizontal | Brand: UNION Type: BFT 105 | Year of construction: 1990 Machining operations: Boring, reaming, deep boring, precision boring, reaming, countersinking, tapping, milling, circular milling, thread milling. The machine can be inspected under power by prior appointment. Condition: Very well-maintained, second-hand / operating condition. Ijdpfxezlal Ij Apcoig TECHNICAL SPECIFICATIONS: - Travels: - X-axis (table transverse movement): 1.750 mm - Y-axis (headstock vertical movement): 1.250 mm - Z-axis (table longitudinal movement): 1.175 mm - B-axis (table positioning): 360° - W-axis (boring spindle axial adjustment): 450 mm Clamping table: - Clamping surface: 1.250 x 1.400 mm - Maximum workpiece weight with centric clamping: 4 tons - T-slot spacing: 125 mm - T-slot width: 22H7 mm - Centring bore: 250 mm Boring spindle: - Diameter: 105 mm - Axial adjustment: NC-controlled - Tool holder: * with tapered shank: A 50 TGL 7837 * with steep taper: A 50 DIN 2080 * with clamping bolts: UNION 95-2805 (A 50 TGL 42620) DIN 69872-28 Speed ranges: - 3 continuously variable ranges: 4 – 2.500 rpm - Drive power: 23,7 kW - Max. spindle torque: 2.500 Nm Feed rates: Continuously variable feed range - X, Y, Z axes: 1 – 5.000 mm/min - Rapid traverse, X, Y, Z-axes: 10.000 mm/min W-axis: 5.000 mm/min B-axis: 3,2 rpm - Max. feed force: X and Y-axes: 16.000 N Z-axis: 25.000 N Specifications: - Total connected load: 50 kW/130 A - Voltage/frequency: 380 V/50 Hz - Machine weight (approx.): 17 tons - Dimensions: 6.560 x 4.370 x 3.450 mm EQUIPMENT: - 5-axis path control: Heidenhain TNC 355 - Swivelling control panel with central control station - Electronic handwheel - Other comprehensive ranges of accessories, such as tool holders, drill bits, milling cutters, and tool trolleys and cabinets ... - Comprehensive documentation available (foundation plan, circuit diagrams, hydraulic documentation, operating instructions and spare parts lists, programming lists) No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale -