Used Limb Protection for sale (11,887)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Njdpfx Amezlh S Asysld Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17650001, functionality: fully functional, power: 34 kW (46.23 HP), pressing force: 250 t, stroke length: 400 mm, throat depth: 250 mm, working width: 3,100 mm, TECHNICAL DETAILS Number of axes: 8 Press force: 250 t Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Max. stroke: 400 mm MACHINE DETAILS Control system: Bystronic ByVision Power: 34.0 kW Dimensions & Weight Nsdpjzk Dv Iefx Amysld Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 EQUIPMENT Crowning system: CNC-controlled Ram holder: Hydraulic Tool holder type: WILA standard Tools included Documentation CE marking and certificate Additional finger stop Stroke assistance Finger protection Offline software

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! TECHNICAL DETAILS Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Nodozkgbyepfx Amyjld Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0720, Year of construction: 2015, overall weight: 370 kg, laser power: 200 W, travel distance Z-axis: 570 mm, laser source model: LS-PEC 200, A comprehensive service costing €5,000 was recently performed on the system by the manufacturer. The lamp, mirror, and cooling circuit pump were replaced. The system was initially used as an exhibit from 2015 to 2018. From 2020, the system was used at approximately 50% capacity, and from 2023, only one day per week! Ideal for toolmaking, repair, or die-casting part refurbishment! TECHNICAL DETAILS Laser type: Nd:YAG Laser source: LS-PEC 200 Average power max.: 200 W Pulse peak power: 9 kW Pulse energy: max. 100 J Pulse duration: 0.4–20 ms Pulse frequency: 1–20 Hz (100 Hz) Focus diameter: 0.2–2.0 mm Nsdjzlqt Nepfx Amyold Positioning speed: 0.5–15 mm/s X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 570 mm MACHINE DETAILS Electrical connection data Mains voltage: 400 V Phases: 3 Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 950 x 1,550 x 1,250 mm Weight: 370 kg Total pulses: 56,527,413 EQUIPMENT Joystick control LED lighting Swivel device for the resonator to weld large molds Protective gas supply directly controlled via a solenoid valve Heavy-duty castors Laser resonator including resonator mechanics Laser rod Resonator cavity Resonator mirror Safety shutter Power supply including mains fuse Mains switch Emergency stop switch Motor protection switch Interface with hardware monitoring function Lamp switch Industrial controller Capacitor bank

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Nodpfx Ajzlhnqjmyeld Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Nlsdpfx Amjzmry Tsyjd Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Nljdszlg E Iepfx Amysd Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Grounding bolt Cables in UL design

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,239 h, load capacity: 2,000 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Includes a new safety inspection! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,600 mm Free lift: 1,600 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Fuel type: Diesel Mast type: Triplex mast with full free lift Transmission: Automatic Additional hydraulics: 1 additional hydraulic circuit (ZH2) with quick coupling Controls: Dual pedal control Nlodpfx Aszmumismyjd Front tires: Superelastic tires, black, new Rear tires: Superelastic tires, black, new Overall height: 2,150 mm Total height: 2,100 mm Unladen weight: 3,800 kg Operating hours: 7,239 h Water pump: replaced at 7,237 h Timing belt: replaced at 7,237 h Battery: serviced EQUIPMENT Cabin with heater Seat heating Grammer seat Side shifter Additional hydraulics with quick coupling Pallet forks Trailer hitch Lighting Work lights front and rear Front protection guard Overhead guard Clamp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, load capacity: 4,000 kg, lifting height: 6,350 mm, free lift: 1,600 mm, fork length: 4,000 mm, Equipment: UVV, Includes new safety inspection! TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 6,350 mm Free lift: 1,600 mm Load center: 600 mm Fork length: 4,000 mm MACHINE DETAILS Mast type: Triplex Full free lift: Yes Fuel type: Diesel Transmission type: Automatic Overall height: 3,000 mm Operating hours: 16,620 h EQUIPMENT Side shifter Fork positioner Trailer hitch Work lights Lighting Cab Cabin heater Air conditioning Seat heating Air-suspended seat Head protection New tires, front and rear Nledpozmuk Isfx Amyed

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN461431, Year of construction: 2013, operating hours: 11,449 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,800 mm, fork length: 2,000 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 6,000 mm Free lift: 1,800 mm Load center: 500 mm Mast type: Triplex with full free lift Overall height: 2,700 mm Total height: 2,700 mm Njdezmui Rjpfx Amysld Fork length: 2,000 mm Tire condition: 90% Fuel: Liquefied petroleum gas (LPG) Fuel type: Gas MACHINE DETAILS Manufacturer: Jungheinrich Model: TFG 430s Year of manufacture: 2013 Operating hours: 11,449 h DGUV inspection valid until: Hydraulic system: leak-proof Maintenance condition: very good Timing belt and water pump: renewed Gas system: renewed EQUIPMENT Triplex mast with full free lift Side shifter Fork positioner Full cabin Raised cabin Heater Head protection Pallet forks Trailer coupling Lighting Additional headlights Front work lights: 6 Rear work lights: 2 Air-suspended seat Additional hydraulic circuit ZH2 with quick coupler Hydraulic buffer Double bottle holder

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,147 h, functionality: fully functional, machine/vehicle number: 4417, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! TECHNICAL DETAILS Travel range X1/X2 axis: 2,320 mm Travel range X3/X4 axis: 2,320 mm Travel range Y1/Y2 axis: 1,980 mm Travel range Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool interface: HSK-E40 Spindle power: 7 kW Nljdpfezl T U Asx Amyod Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nl/min Voltage: 400 V (±5 %) Frequency: 50 Hz Power connection: 3 phases, neutral conductor, and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating hours Spindle hours, Spindle 1: 7,827 h Spindle hours, Spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ Nedpfeyr Utnsx Amyeld If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm Nodpfey U Hmgsx Amyjld 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Nsdpfx Amoq Ikgysyjld Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Delivery time: Current delivery time under 10 weeks Features: • Box-motion end sealing • Manual reel fixation without compressed air • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 16400 € Nlsdsyg N S Ispfx Amyed 314.88 € 2050 mm 3 mm 35 1/min 1.5 ° 750 mm 3 kW 800 mm 520 mm 2720 mm 1575 mm 1230 mm 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader Nledpfx Aezhub Aemyjd - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Nledpfx Amofcqtcoyed Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,371 h, load capacity: 1,600 kg, lifting height: 4,266 mm, free lift: 1,395 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, fork length: 1,150 mm, empty load weight: 1,340 kg, drive type: Elektro, High-lift pallet truck Load center: 600 Fork width: 560 mm Mast type: Triplex Nlodpfx Amjzpcbtsyod Condition: Ready for use and fully functional Technical condition: normal Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery type: PzS Description: For dealers or export only Mast protection made of Plexiglas, combination instrument, creep speed function

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Nedpfx Aozpatmomyjld Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric machine / Production line with Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Platen size: 1110x1030 mm Nlodpfx Aozpapnemyed Ejector: electric Clamping unit: toggle type Control: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core pull x 2 on the side of the fixed platen Hydraulic core pull x 3 on the side of the moving platen Control system with hot runner nozzles x 10 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servo motor with inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis B-rotation, Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Safety package for robot Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Nodpjzpanwjfx Amyold Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, clamping force: 500 kN, Equipment: documentation/manual, Clamping force - 500/650 kN Injection cylinder diameter - 27 mm Theor. Cylinder volume - 50 cm3 Centering circle diameter - 125 mm Min. mold height - 210 mm Max. mold height - 460 mm Max. opening of the cap - 600 mm Distance between columns (vertical) - 320 mm Distance between columns (horizontal) - 360 mm External dimensions of the clamping plate (w x h) - 500 x 470 mm Number of hydraulic cores - 0 Number of pneumatic circuits - 2 Max. ejector stroke - 70 mm Power consumption - 30 kW Equipment / Options: 1. Power transformer AC400V → AC200V 2. Air ejector – 3 circuits 3. Reject part detection 4. Euromap E67 5. USB interface 6. Parallel mould movement / dosing 7. Parallel mould movement / ejector 8. Pre-injection function 9. Precision dosing function 10. Screw check valve backflow measurement 11. Shut-off nozzle – software 12. Hot runner valve gates – 8 circuits (software) 13. Communication with temperature controllers (software) Nlodjzn Uqwopfx Amyod 14. Intelligent mould protection 15. Intelligent ejector protection 16. Tool kit 17. Fuse kit 18. 21 freely programmable inputs/outputs 19. 2× analogue inputs 0–10 V DC 20. Alarm beacon with audible signal 21. Czech operating manual 22. 1-day operator training at customer site 23. Commissioning 24. Automatic clamping force correction during operation

Year of construction: 1998, condition: used, Infant Formula Milk Line Nodpfx Amozn Ux Ueyeld Compete line, comprising: - Ferlo Metal Can depalletizer - Indosa FB150/2000 UV disinfection tunnel - Indosa ZV 162/500 Spoon Positioner and Inserter - Indosa MATIC F 200 Powder Dosing Machine - Garvens VS 3 Dynamic Checkweigher - 2x Coremain ATRV UV tunnel for metal lid disinfection - 2x Indosa VACU-MATIC 131/2 Vacuum and protective atmosphere can seamer - Indosa SF 184 Plastic cap preparation and applicator - Stork SL 25 Case packer - Inmeconsur 40-3105-H Roll-fed can labeller - MarcoPack MCP-300T Labeller - Stork Box elevator

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: CYBELEC, controller model: CybTouch 6, overall weight: 11,600 kg, total width: 2,080 mm, total height: 2,060 mm, cutting length (max.): 3,100 mm, product length (max.): 4,000 mm, CNC shearing machine manufactured in 2019. This GILARDI ATHENA 3.10 features a working length of 3,100 mm and a cutting capacity of 10 mm at 42 kg/mm². It includes a CYBELEC CybTouch 6 CNC control, automatic blade gap adjustment, and a robust steel frame. If you are looking to get high-quality shearing capabilities, consider the GILARDI ATHENA 3.10 machine we have for sale. Contact us for further details. • Cutting capacity: • 10 mm at 42 kg/mm² • 6 mm at 70 kg/mm² • Adjustable cutting angle: 0.5°–2.5° • Cutting rate: 6–14 strokes/min • Back gauge travel: 1,000 mm • Number of hold-downs: 14 • Main motor power: 11 kW • Throat depth: 175 mm • Control: CYBELEC CybTouch 6 CNC with color display • Features: • Automatic blade gap adjustment • Automatic blade stroke adjustment • Adjustable blade cutting angle • Hardened 4-edge cutting blades (54–60 HRC), divided into 835 mm sections • Front sheet supports • Operator hand protection guards Njdpszn Nvzefx Amyjld • Sheet hold-down system • Rigid welded ST44A1 steel frame

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, total height: 2,550 mm, total width: 2,400 mm, overall weight: 13,000 kg, product length (max.): 12,000 mm, This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details. Nledezn I Sbspfx Amyjd - Machine Type: Fully Automatic Joinery Machine- Workpiece Cross-Section Min.: 20 x 50 mm- Workpiece Cross-Section Max.: 300 x 450 mm- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)- Operating Voltage: 400 / 230 V (3/N/PE)- Electrical Frequency: 50 Hz- Fusing Protection: 3 x 63 A- Peak Power Requirement: 15 kW- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)- Compressed Air Flow Requirement: > 600 l/min- Hydraulic Operating Pressure: 100 bar- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m- Included / Equipping Components:* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)* Vertical Combo Support* Horizontal Combo Support* Rafter Nail Drilling Unit* Slotting / Mortising Unit* Infeed & Outflow Conveyors / Positioning Trolleys