Used Lifepak 15 for sale (44,706)

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14 Codpsxaud Iefx Ab Toaa

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Edger, trimming saw, multi-blade saw MADREW DCKWW 300/15 Year of manufacture: 2014 Machine is fully operational and in very good technical condition. TECHNICAL DATA: Saw spindle motor power: 15 kW Stepless feed speed adjustment: 6.0 ÷ 35 m/min Saw spacing with spacers (Board Width): 20 ÷ 300 mm Max number of saw blades: 4 Applicable saw blade diameters: Ø 250 ÷ Ø 400 mm Codpfx Aex A Sfnjb Tsaa Maximum cutting height: 120 mm Minimum board length: 1000 mm The machine is equipped with interlock and safety systems, ensuring safe and reliable operation: - Phase sequence and phase loss indicator - Overload indicator for the machine due to blunt blades or excessive feed rate

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. Cjdpfotu Hpqex Ab Toaa The device can be inspected under voltage at Paintrobotics.

Condition: excellent (used), Bead mill Molteni MS.15 Ex-protected version grinding container 15 l additional grinding tank double jacket Codpfjiu H Ucsx Ab Tjaa power 17,5 kW Very good ready to use condition, directly from production!!!

Year of construction: 1980, condition: good (used), with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm Cedpfxokzg E Ae Ab Teaa max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, Lightly used ORMA MEMBRANE PRESS, model DUPLEX 30/15 vacuum press with preheating oven/table for acrylic and thermoform plastics. Has only seen occasional light project use. Suitable, for example, for processing Corian sheets. An alternative to buying a new machine. Pressing area: 3000 x 1500 mm Vacuum pressing force across the entire work area: 44 tons 11 tons/m2 Maximum pressing height: 500 mm ORMA HEATING OVEN/TABLE 30/15 FOR ACRYLICS AND THERMOFORM PLASTICS • Heating by electric resistors and air circulation • Heated area: 3000 x 1500 mm • Max height of workpiece: 100 mm • Heating power: 18 kW • Maximum temperature: 200°C • Digital temperature control from the control panel The unit's frame is made from welded thick steel beam structure and welded steel sheets. There is an insulation layer between the galvanized steel sheets of the oven’s inner and outer surfaces. Manual oven opening, guided rails, and transport wheels. Membrane press bed is phenolic-coated plywood featuring a grid pattern for improved vacuum distribution. The top section, where the membrane film is mounted, opens 45 degrees and is equipped with gas springs. Csdpfoxz Rhfjx Ab Tsaa Quick and easy upper section locking. Manual membrane film quick-mount system. Vacuum system with a single 25 m3/h vacuum pump. Control panel, installed on the left side of the machine, includes: • Main switch • Control voltage indicator lamp • Emergency Stop button • Temperature monitoring/control • Vacuum pump status light on/off • Heater status light on/off

Condition: used, mileage: 229,000 km, power: 206 kW (280.08 HP), fuel type: diesel, color: blue, axle configuration: 4x2, fuel: diesel, wheelbase: 5,250 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, General information Year of manufacture: 2017 Cjdpfoxziizex Ab Toaa Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Axle configuration Suspension: leaf suspension Front axle: Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Measures Dimensions (LxW): 795 x 255 cm Weights Empty weight: 8.185 kg Carrying capacity: 11.315 kg GVW: 19.500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Codpfexxal Isx Ab Teaa Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: Speedlock P90 Included in delivery are: 01x pallet rack traverse, used Material color: orange Type of truss: BX100|50|15 box profile: 100 x 50 mm agraffe: 4 HK (hooks) clear width: 3.000 mm max. load per truss pair 2.150 kg, with evenly distributed load shelf load only valid in combination with frame profile 90|20 Caedolkc I Uopfx Ab Tja 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), 4 x eccentric press Ebu / Weingarten consisting of the following types: 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 1 x Weingarten A 40 Csdpoq Rdr Tsfx Ab Tsaa The machines can be inspected on site.

Condition: used,

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For you as a buyer the following information for your safety! The following points are carried out at our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Csdpfx Abjfktnye Tsaa Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Max. operating temperature: 1120°C Normal operating temperature: 1050°C Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Heating Chamber Width: 500mm Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Caedpfjwku N Usx Ab Tsa Frequency: 50Hz You are welcome to visit us by appointment.

Year of construction: 2007, condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH Cajdpfx Aeh Agwrjb Toa

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: Speedlock P90 Codpfx Abslkc Ers Toaa Included in delivery are: 01x pallet rack traverse, used Material color: orange type of truss: SLB 100|15 box profile: 100 x 50 mm agraffe: 5 HK (hooks) clear width: 3.000 mm max. load per truss pair 2.300 kg, with evenly distributed load shelf load only valid in combination with frame profile 90|20 02x safety pins, used Execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Year of construction: 1970, condition: used, Technical details: Csdpfx Aexu Dwyob Tjaa x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. It is mainly used for metals to assess fracture toughness under dynamic loading. *

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min Csdpfsndz Aqjx Ab Teaa rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: excellent (used), Year of construction: 2008, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 410 mm Y-axis: 610 mm Z-axis: 500 mm Table Data Table size: 320 x 320 mm Maximum table load: 100 kg C-axis: 360° B-axis: +30° to -120° Cajdpfx Aexv Dzuob Toa Spindle & Tool Holder Speed: 15,000 rpm Tool holder: SK 40 Magazine with 48 positions Pallet storage: Indumatik light

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202102, overall weight: 2,400 kg, type of input current: three-phase, total height: 1,790 mm, pressure: 6 bar, pressing force: 70 t, This Comec SPM/15 moulding machine is in excellent, like-new condition, with very low operating hours. It’s been used for precision moulding of soles for Footwear. Codpfjxu Dyzsx Ab Toaa Operation: Pneumatic, Oleodynamic Ideal for: Footwear soles, technical moulded parts, or similar applications Machine has been regularly maintained, kept in a clean production environment, and shows no signs of wear or damage. Perfect choice for manufacturers looking for top performance at a lower investment cost compared to a new unit.

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 8170, measuring range X-axis: 3,000 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,600 mm, overall weight: 7,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS X-travel: 3,000 mm Y-travel: 2,000 mm Z-travel: 1,600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 6,000 x 3,000 x 4,000 mm Weight: 7,000 kg EQUIPMENT Loading gantry on rollers Various clamping elements Angle plates Computer including three-axis digital display Caedpfx Aboxni Eve Tja

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Csdpfx Aboiiipuo Toaa Stock dimension width: 15000 mm

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm * Caodpfx Asu S Hywsb Toa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: electric, sheet thickness (max.): 1 mm, workpiece diameter (max.): 1,500 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, type of input current: three-phase, overall weight: 350 kg, Machine: Circular Shears Brand: Fasti Type: 502 / 15 / 1.5 Technical Data: Working diameter min/max mm: 120 - 1500 Strip cutting width min/max mm: 10 - 260 Sheet thickness at 400 N/mm² mm: 1.5 Casdpfx Aboxp Sd De Tsa Drive power kW: 0.75 Weight approx. kg: 350

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm Csdpfx Aboxhgfmj Tjaa T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. Caodpfx Aeu Nu Nkjb Toa -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *