Used Leit Spindle Lathe for sale (14,310)

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Csdpfx Aehy Tdyokcorb Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions Cedpfx Aog R S Rcskcorb -used, as seen -

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more Crjdpfx Aexyh Ndskcsb About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Credpfx Aewvhxgokcjb Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 68005015 06 0026, spindle bore: 80 mm, turning diameter: 300 mm, turning diameter over bed slide: 500 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Serial number: 6800 5015 Max. turning length: 1,500 mm Swing over bed: 500 mm Swing over cross slide: 300 mm Spindle bore: 80 mm Speed range: 12.5 – 2,000 rpm MACHINE DETAILS Dimensions: 3,100 mm x 1,200 mm x 1,700 mm Weight: 2,000 kg Csdpfxowvh Axj Akcorb Connected load: 12 kVA Operating voltage: 400 V, 50 Hz EQUIPMENT - SONY digital readout - 2 three-jaw chucks (diameters: 250 mm and 310 mm)

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom. Cedpfowudhuex Akcerb

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: Lehmann electrol 5035, turning diameter over cross slide: 914 mm, turning diameter: 914 mm, center height: 647 mm, turning diameter over top slide: 914 mm, spindle bore: 409 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, turning diameter over bed slide: 1,295 mm, overall weight: 18,636 kg, swing diameter over cross slide: 914 mm, total height: 2,100 mm, total length: 5,500 mm, total width: 2,320 mm, air pressure: 7 bar, distance between centers: 2,844 mm, 16 1/8" Lehmann Hollow spindle Oil country Manual Lathe machine 5035 with attachments Semi-automatic threading system ,Taper Attachment,front & rear Chucks 36” 4-jaw, 16 ¼ hole Swing Over Bed Ways 51” - Swing Over Cross Slide 36” - Distance Between Centers 112” - Motor 75 HP 500 RPM Model: Lehmann electrol 5035 Serial No: 501616-010 input voltage : 3 phase -380 - 460 V Crjdetp T Azjpfx Akcjb Manufacturer : Lehmann -USA Manufacturing date : 1982 Weight: 41,000 lbs.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter: 800 mm, center height: 400 mm, center width: 4,000 mm, turning length: 3,800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 800 mm Center height: 400 mm Turning length: 3,800 mm Distance between centers: 4,000 mm Max. swing diameter over cross slide: 570 mm Max. swing diameter in gap: 1,130 mm Work spindle Spindle head according to DIN: 55027, size 11, internal taper 20 Spindle diameter at front bearing: 165 mm Spindle bore: 120 mm Face plate diameter: 564 mm Max. chuck diameter: 380 mm Max. spindle speed: 750 rpm Tailstock Quill taper: Morse 6 Quill diameter: 110 mm Max. manual quill stroke: 310 mm Feed rate Longitudinal carriage: 0.092 - 1.590 mm/min Cross slide: 0.046 - 0.795 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6600 x 1850 x 2250 mm Weight: 10,900 kg Credpfx Asw Rqrwekcsb EQUIPMENT Comprehensive accessory package included.

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected Csdpsdbgxcsfx Akcerb -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: new, Precision lead screw and feed screw lathe Manufacturer: GDW Model: LZ 400 V economyline Condition: New machine with stepless speed control Cjdpfxjxg Emye Akcerb to the highest safety standard Centre height: 200 mm Centre distance: 1,000 mm Spindle bore: 62 mm Standard configuration includes: -- 3-axis digital readout, 7" colour display with constant V feature - LED machine light, integrated into machine enclosure - Electromechanical limit switch system for threading and feed operations - Quick-change toolpost size B with turning tool holder - Main drive brake system (spindle brake) - Sliding chuck guard with interlock monitoring - Removable chip guard rear panel - Sliding splash guard - Extendable chip tray - Simple bed stop - Central lubrication system - Set of change gears (number of teeth: 21-33-84-120) - Reducing sleeve for main spindle inner taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual with spare parts list and electrical documentation

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring - Removable rear chip guard - Sliding splash guard - Pull-out chip tray - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 Codpsw S E Ddjfx Akcjrb - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Crjdpfx Akou Aftgsceb >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces Crjdovtp Edepfx Akcob >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg Cedpfx Aevivmyokcerb >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop Codpfxjxcuazj Akcjrb >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: Cedpfjwrmuxox Akcerb >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: Crsdpfx Aksw Nw Dqecob We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: repair required (used), Year of construction: 1989, 6 spindles Thread cutting Cross drilling Thread rolling Milling attachment Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader Crsdpfsv R Uqtjx Akcsb

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm Cjdpfx Ajp Dux Tjkcsrb guide tubes 4,000 mm chip conveyor

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Crodpfx Akoxf E Rcocsb Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Csdpfx Akswxb Erjcjrb Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Codpfxev S Dp Ij Akcjrb Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: new, Made in Italy. Center height: 300 mm Turning diameter over bed: 600 mm turning diameter over slide: 380 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm motor power: 9,2 kW (special equipment / standard: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide stroke: 340 mm Top slide stroke: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital display - Automatic lubrication of the guideways - LED illumination - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick change holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider Crjdpfx Aksd Nk Ncecsb - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price incl. 3-axis digital display.

Condition: used, Year of construction: 1995, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Credpfx Akew Hbz Aoceb Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Crjdpfx Aow Hb Trjkcjb loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at) or *