Used Lectrostatic for sale (103)

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available Lhsdpjh Rdwxsfx Ab Uen - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, Year of construction: 2001, Technical details: turning length: 300 mm x-axis: plan: 800 mm longitudinal traverse (z-axis): 300 mm control: Siemens 840D Ljdpsvamgxofx Ab Uehn revolution per minute: Hauptantrieb: 20 - 5000 U/min Revolution driven tool (turret): 6000 U/min. revolution per minute: C-Achse: 0 - 100 U/min spindle bore: 79 mm Torque: Hauptantrieb: 200 Nm max. torque on the spindle: 240 Nm max. torque at clamping center: Werkzeugträger: 28 Nm m rapid motion - x-axis: 100 m/min rapid traverse Z-axis: 45 m/min tool turret - number of stations: 12 Stationen / Stations tool taper: VDI 40 Main spindle capacity: 27 / 20 kW spindle hours: 42.400 h operating hours - idle run: 93.728 h electrics - voltage/frequency: 3~ / 400V / 50Hz V/Hz interface: ja total power requirement: 50 kVA Weight approx.: 8,0 t dimension machine xH: 3,2 x 3,95 x 2,8 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm Application: This vertical lathe is suitable for 2-axis machining (turning, drilling; milling, Y-axis) of chucked parts. Equipment: -High-pressure coolant unit BMF for 500 liters -Make Bürener chip conveyor with oil mist separator/industrial filter ifs/ IFM 1000CTV (electrostatic extraction) -Workpiece loading and unloading device with/for 20 stations -Power chuck Ø 225mm, foot switch -Clamping surface in the work area: W: 340 x H: 430mm with 7x T-slots according to DIN 650 -Hydraulics -6x various turning tool holders and 2x various tool holders (rotating) *

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm Lsdsxnkdmjpfx Ab Uohn - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: repair required (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 695005, total height: 2,310 mm, total length: 2,500 mm, total width: 3,850 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 10,500 rpm, feed length X-axis: 480 mm, feed length Y-axis: 320 mm, feed length Z-axis: 700 mm, type of input current: AC, grinding wheel diameter: 150 mm, overall weight: 8,000 kg, grinding length: 400 mm, rotational speed (max.): 10,500 rpm, grinding spindle speed: 10,500 rpm, pivoting range: 200 °, travel distance X-axis: 480 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 700 mm, grinding spindle motor power: 30,000 W, power: 30 kW (40.79 HP), workpiece diameter (max.): 320 mm, input current: 35 A, grinding diameter: 320 mm, input frequency: 50 Hz, disc diameter: 200 mm, input voltage: 400 V, Equipment: rotational speed infinitely variable, CNC tool grinding machine Walter Helitronic Vision, with pallet loader, 12-position disc changer, electrostatic mist separator, fire extinguishing system, oil supply pump, Walter Window Mode and Toolstudio software. Software packages: 001,002,003,005,008,016,017,023,026,027,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, with preparation for hydraulic unit (steady rest), external programming station. The grinding spindle (single spindle) is defective. Lhedpfexn Abdox Ab Uon

Condition: used, Entionisierung – Entladenetzteil / Deionization – Discharge power HAUG EN-8 Baujahr / Year 2004 - Serial-No. 933594/40 2 Stäbe, Länge jeweils 70cm lang / 2 Rods length each Rod 70 cm long zum Entfernen elektrostatischer Ladungen /  for removing electrostatic charges Funktionsprinzip Die anliegende Netzspannung wird durch einen Hochspannungstransformator auf 7–8 kV Wechselspannung transformiert. Die im Sekundärbereich integrierte Funktionsüberwachung meldet die Unterschreitung der Koronaeinsatzspannung (= Wirkungsbeginn von Ionisationsgeräten) durch Blinken der Kontroll-LED. Operating principle The applied mains voltage is transformed to 7-8 kV AC voltage by a high-voltage transformer. Ledpfsxlri Sox Ab Uohn The function monitor integrated in the secondary section signals that the corona inception voltage has been undershot (= start of effect of ionizing units) by flashing the control LED. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2003, controller manufacturer: Mitsubishi, controller model: TX-8H, _____ Description: Year of manuf. : 2003 Control : Mitsubishi TX-8H Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:5.600 rpm Power:18,5 kW Torque:170 Nm Barcapacity:42 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 42 Subspindle: Technology:Belt-driven spindle Speed:5.600 rpm Power:11 kW Torque:150 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop mini Axfix Gr. 42 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Lodpfx Abjxiukmj Uehn Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 12,4 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 12,4 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Interface hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, Lhodpoxmirgsfx Ab Usn which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: used, Year of construction: 2008, Suitable for regrinding and remaking all types of wood and metalworking tools. Accessories: Software Package 1 (cylindrical tools), Software Package 2 (conical spiral tools with sharp edges, corner and full radius), Software Package 3 (drills and step drills), Software Package 16 (warm-up program), Software Toolstudio Standard / Advanced Version 3.4, Software Toolstudio Option Step Tools, Infinitely variable speed control, Automatic central lubrication, Measuring probe, Electrostatic mist extractor, Oil collecting pan, Coolant system with pump and tank, Lodpfxswl Irlj Ab Uohn 2 grinding wheel holders. X-axis longitudinal movement: 460 mm Y axis vertical movement: 320 mm Y-axis vertical movement: 320 mm Z-axis (transverse movement): 660 mm C-axis swivel range: +/- 200° Workpiece holder: ISO 50 Max. Workpiece diameter: 320 mm max. workpiece length: 350 mm Grinding wheel drive power: 7 kW grinding wheel drive power: 7 kW Grinding wheel speeds infinitely variable: 9,500 rpm Grinding wheel diameter: Max. 200 mm Connected load: 20 kVA (400 V / 50 Hz), Dimensions W x D x H = approx.: 2570 x 2930 x 2280 mm Weight approx.: 4500 kg colour: grey RAL 7011 / signal white RAL 9003.

Condition: like new (used), functionality: fully functional, ESD-PROTECT TOM 8600 TERA Ohmmeter ESD Test Set LIKE NEW: - For measuring surface and resistance to ground, as well as humidity and temperature measurement - 2 measuring electrodes ME10 - Electrostatic Field Meter EFM 823 - HV Charger CPS 822 - Like new from 2023 (used once) - Original price: €2,900 net plus VAT - Accessories as pictured Ljdpfxow Ebh Ho Ab Uehn - Supplied in a lockable transport case Shipping available for an additional €23.90. #8303

Condition: new, Year of construction: 2017, Dry epoxy cast traction rectifier transformer - manufacturer TESAR Italy, power 2800kVA 20(2x±2,5%)/2x0.586kV, Dd0yn11, IP00 (without protection), load level IV (IEC6016), 100%-2800kVA-continuous, 150%-4200kVA-2 hours, 300%-8400kVA-60s, standard losses according to IEC, Al-Al winding, electrostatic screen, dimensions 2.45x1.4x2.7m (lxwxh), weight 7500kg, never used, complete documentation and test report, 6 pcs in stock, year of manufacture 2017, suitable for battery storage systems BESS, can be installed outdoors in case of IP33 protection. Price negotiable Lsdpexlybcsfx Ab Ushn

Condition: used, Year of construction: 2018, turning diameter max. 3.800 mm diameter of spindle flange 1.900 mm max. swing diameter 3.800 mm control 840 D sl Siemens turning speed range - main spindle max. 100 min/-1 power capacity - main spindel 200 kW max. Torque 67.000 Nm gear box 1:30 tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm max. tool diameter 120 mm 0 125 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm x-axis 1: 2.800 mm x-axis 2: 3.200 mm z-axis 1.000 mm rapid traverse X: 32 / Z: 20 m/min feed power X/Z: 22 kN total power requirement 250 kVA weight of the machine ca. ca. 30 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC - Double-Spindle-Vertical-Lathe PITTLER - PV 4000 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option - Retractable Foot Guards - Coolant Circulation - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Remote Diagnostics for the NC Area - Teleservice for the integrated PLC of the Sinumerik 840 D - Ethernet connection in the control cabinet - Variable speed range to prevent vibrations - Air purifier, electrostatic separation Lhodpfsxap Dpsx Ab Uen - Measuring probe for in-process workpiece measurement - Walk-in work area

Condition: used, Year of construction: 2004, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2004 Control : Mitsubishi TX-8i Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:18,5 kW Ledpfxexhbfnj Ab Uohn Torque:230 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:11 kW Torque:210 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Ejector:Hydraulic with flush Movement in Z:520 mm Rapid travers in Z:30 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder, Rinsing pistol

Year of construction: 2023, condition: new, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️ Net price only €18,999 ‼️ With our complete system, as shown in the picture, you can finely mill your plastics and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and all other types of plastic recycling machines available. Whether you are a large company, medium-sized business, or small enterprise, with our expertise we can cater to your individual needs in the recycling sector with our machines! We have machines in stock in Heilbronn for live demonstrations! From copper granulation plants, shredders, and electrostatic separators (for example, to separate sand from plastic, copper from plastic, different types of plastics, etc.), so you can directly reuse clean material. Just ask us. We manufacture the appropriate system tailored to your needs. Unfortunately, our English is not perfect. You’re also welcome to speak to us in Swabian! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from the hardest special steel alloy ▶️ All-inclusive as shown in picture ▶️ Weight approx. 1,200 kg Net price: €18,999.00 Lhodpfx Aoqvmn Nob Usn +19% VAT: €3,609.81 Gross price: €22,608.81 Subject to errors. Pictures/description may vary.

Condition: new, functionality: fully functional, Year of construction: 2024, Box Type Electrostatic Powder Coating Oven Length:650cm, Width:450cm, Height:250cm Lhodpfx Abev Nvrvo Usn Powder Coating Booth with Cartridge Filter: Length:400, Width:300, Height:250cm Electrostatic Powder Coating Equipment: Painting Spray Gun Set

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Ljdpfx Ajxcqmqjb Uehn Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2012, Exhaust gas filter system, exhaust gas filter system, exhaust filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, particulate filter, industrial filter Ljdpfswrcbnex Ab Uohn -Manufacturer: ifs, exhaust air purification system industrial filter type IF-Vario M 1600 -Nominal power: 0.75 kW -Suction power: 1600 m³/h -Individual components: see photos -Dimensions: 990/600/H660 mm -Total weight: 100 kg

Condition: used, Year of construction: 2021, turning diameter max. 2.800 mm diameter of spindle flange 1.100 mm max. swing diameter 3.000 mm control 840 D sl Siemens turning speed range - main spindle max. 230 min/-1 power capacity - main spindel 206 kW max. Torque 53.000 Nm tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm Ledpfjxap Dcjx Ab Uehn tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm workpiece diameter at full load 150 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm tool taper Capto C8 x-axis 1: 2.700 mm x-axis 2: 2.700 mm z-axis ((((2x 1.000 mm rapid traverse X: 40 / Z: 24 m/min feed power X/Z: 22 kN total power requirement 200 kVA weight of the machine ca. ((((ca. 30 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC - Double-Spindle-Vertical-Lathe PITTLER - PV 2500 - Control system expansion / software SINUMERIK 828D/840D SL ProgramSYNC software option - Retractable step guards - Coolant circulation system - Oil hose skimmer - SIEMENS Safety integrated - Network interface / data transmission DNC option - Variable speed range to prevent vibrations - Air cleaner, electrostatic precipitator - Touch probe for in-process workpiece measurement - Walk-in work area

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Ledpfx Abow Si T Ae Uehn Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Year of construction: 2024, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ. Ledeqvmpfepfx Ab Uohn

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Ljdpjwmm U Usfx Ab Ushn

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Ledpfxov I Tfdj Ab Ushn Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Lhsdpfx Absuiq Dhj Uon

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears Lodpfew Iquyox Ab Ushn -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Spindle: Technology:Motortspindle Lhsdsv S Dnkepfx Ab Uen Speed:6.000 rpm Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: Lhodpfxown Egrs Ab Uon - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg