Used Lathe Y Axis for sale (25,020)

Condition: excellent (used), Year of construction: 2006, operating hours: 6,650 h, functionality: fully functional, Equipment: documentation/manual, The used HAAS SL 30 THE CNC lathe is a fast, medium-sized, slant-bed numerically controlled lathe equipped with a tailstock, C-axis spindle, and a 12-position powered turret with VDI 40 tooling interface. The configuration also includes a tool presetter, chip conveyor, programmable tailstock body, hydraulic 3-jaw chuck 250mm BB, and fixed toolholders. Lodpfx Asxdvarsd Nerg Main features: Maximum workpiece diameter: 350 mm Maximum workpiece length: 826 mm Maximum bar diameter: 76 mm Spindle speed: 3,400 rpm Spindle power: 30 HP Year of manufacture: 2006, with only 6,650 spindle hours, CE compliant machine.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Ljdswbu T Uspfx Ad Nerg Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Ledowzh Eqepfx Ad Nsrg Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders Lodpswq Rpwofx Ad Norg 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Year of construction: 2006, condition: good (used), Make: WFL Austria Type: M 100 / 5000 Control: Siemen 840C Year: 2006 MillTurn M100: Complete & Complex machining Turning & Milling Equipped: ATC 108 double chain for milling tool holders ATC 10 positions boring bar holders up to 1000 mm SCHUNK 3 chuck THW 630 - 160R SMW Steady rest SLU-Z-5 50 - 310 mm Field off application: Aerospace Oil and Gas Energy Engineering Crankshaft Hydraulic and Pneumtaics Specifications Metric US Standard Max. turning Ø 910 mm X-Axis 900 (+850 to -40) mm Y-Axis 500 (+300 to -200) mm Z-Axis 5370 mm B Axis 200 ° Spindle bore 165 mm Speedrange 1600 Rpm Spindle power 60 kW ATC / revolver 108 B-Axis Toolsystem Capto C8 B-Axis Speedranges 4000 Rpm Lredekvndtjpfx Ad Nog B-Axis power 25 kW Chip conveyor Yes Pinole taper 6 Mk Stroke pinole 200 mm Quill Ø 180 mm Dimensions (Estimate) Length 14500 mm Width 4500 mm Height 3800 mm Weight 40000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm Lrsdpfx Aopgrzcsd Nog turning diameter: max. 430 mm Bar diameter: max. 102 mm speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: ready for operation (used), Year of construction: 2018, 4-Axis CNC Vertical Lathe Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofitted) CNC: FANUC 0i Specifications: Turning capacities: Max. swing diameter: 2650 mm Max. turning diameter: 2600 mm Max. turning height: 1900 mm Table: Diameter: 2500 mm Max. load: 15 t Rotational speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Cross rail carriages: Vertical travel right carriage: 760 mm Vertical travel left carriage: 1200 mm Cross rail: Vertical travel: 1600 mm Dimensions (width x depth x height fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Ledpfew Add Esx Ad Njrg Set of 4 jaws

Condition: excellent (used), Year of construction: 2017, operating hours: 9,400 h, machine/vehicle number: 7584, 2000mm Table CNC S type Elevating Crosslide Webster Bennett (Original CNC). Modified 2 to suit users capacity. Original ATC removed to increase turning capacity. Extended Height workpiece ht. 1600. with Z axis travel. 1350mm ram tooling adapted to accept Capto no.6 tooling. Spindle speed infinitely programmable max 182rpm. Lredpfxevztfko Ad Neg Fully remanufactured 2017. Retrofitted with a Fagor 8055 cnc with operator input conversational programming, operator remote for setting. New electrical retrofit with Fagor axis servos and motors. Fully enclosed interlocked guard system, swarf deflectors to removable bins, Full software and documentation available.

Year of construction: 2005, condition: ready for operation (used), A CNC 4-axis lathe Okuma including a conventional external cylindrical grinding machine TOS BUAJ 28 is available. 1) Lathe, year of manufacture: 2005, turret: 2-disc turret, tool positions: 12/8, tool holder: VDI40, speed: 3800rpm, turning diameter: 370mm/530mm, turning length: 600mm, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2200mm, weight: approx. 6800kg, control: Okuma OST E100L. Includes clamping device design, part catcher, part conveyor, and chip conveyor. Without tailstock, bar loader, spindle reduction, and VDI holders. 2) TOS, year of manufacture: 1988, max. grinding diameter: 280mm, center height: 140mm, distance between centers: 630mm, max. workpiece weight: 120kg, headstock: MT4, workpiece spindle swivel range: +/-90°, grinding head swivel range: +/-45°, grinding wheel dimensions X/Y/Z: 400mm/40mm/127mm, speed: 2560rpm, feed rate: 7m/min. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/1500mm, weight: approx. 2000kg. Includes accessories and grinding wheels. Documentation available. An on-site inspection is possible. Ledpjw Rqwyjfx Ad Norg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ Ljdpox I A Hcofx Ad Norg • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Ledovxpuiopfx Ad Nsrg Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: excellent (used), Year of construction: 2012, operating hours: 27,960 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,900 h, number of spindles: 1, number of slots in tool magazine: 41, Haas VF-3SSYT 5 axis Technical specifications: travel distance X-axis : 1016 mm travel distance Y-axis : 660 mm travel distance Z-axis : 635 mm • Spindle 12,000RPM • Tool Clamping SK/BT 40 • Tool Magazine – 40 Places +1 • Chip conveyor • ICS included (might be 30 bar) Lsdpfx Adsxbifcs Njrg • Process Measurements – Renishaw Kit – OMP+OTS • Production Date –2012 • Spindle time - 27900 • 5 axis on the table Located in Israel 2 hour from international Airport under power and ready for inspection

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies Ljdex Hp Iwopfx Ad Nerg 2000mm Bed extension

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lrsdpsx D U Arefx Ad Nog Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2004, DAEWOO Mynx 540 cnc vertical machining center Year: 2004 Specifications: Axis X travel 1020 mm Axis Y travel 510 mm Axis Z travel 625 mm Rotary table ( Tsudakoma RZ-200 ) Type of CNC FANUC 21i-MB Table length 1200 mm Table width 500 mm Max. part weight 800 kg Number of tool positions 24 Spindle taper BT 40 Max. spindle speed 8000 rpm Spindle motor power 15 kW Weight 7500 kg Machine has new spindle, fitted in October 2025. Accessories/options: - 4.axis Rotary table ( Tsudakoma RZ-200 ) - Through spindle coolant - Documentations - Remote control - Coolant tank - Spindle cooler Lrsdpfsxt E Drex Ad Njg Under power in our warehouse!

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. Lrodpfx Adeu Itk Rj Nsg The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Lredpsv I T Ewofx Ad Neg Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, operating hours: 16,911 h, HITACHI ZX 250 LCN-3 Year of manufacture: 2008 Ljdpfx Aoxw Apmod Nerg * 132 kW * Hammer line * Quick coupler * Cabin protection grid * Undercarriage approx. 70%

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Lredpfsxdmgvex Ad Nog Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Ledpfjxpqm Rjx Ad Njrg Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 Lredsw Rya Djpfx Ad Nsg CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15

Year of construction: 2002, condition: like new (used), Capacity: 3.420 m3/h Ledpsgq Rbhsfx Ad Norg Vacuum: -270 mbar Operational press: 260 mbar Power: 7,5 kW

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Ljdpfx Adjwhylvo Nerg Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Lrjdpfxox Uz Eds Ad Neg Electrical Supply Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Performance Data Power: 24 kVA Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! Lodpfox U Af Sjx Ad Nsrg TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran