Used Lathe Wood for sale (21,812)

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Codpofmd Dhofx Abuorh Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Codpfxjxladws Abuerh

Year of construction: 2004, condition: good (used), We are offering a Doosan Puma 2000 LSY with bar feeder: - Year 2004, 9,400 operating hours - Fanuc 18i-TB - LNS Servo 2 bar feeder - Tool measurement system - Chip conveyor - 12 tool stations Csdexk Uz Ijpfx Abusrh - x, y, x, b = 250, ±50, 830, 830 Under power

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Crjdpexd D Rfjfx Abuoh Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: good (used), Swing over bed 425 mm Distance between centers 1500 mm Crjdpfx Abjhz D Eueush Spindle speeds 36-2240 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2011, Lathe Trens Trencin SN 500 SA, lead and feed screw (2011) Manufacturer: Trens Trencin Credpfxsxladdo Abuoh Model: SN 500 SA Year of manufacture: 2011 Swing diameter over bed: 505 mm Distance between centers: 1000 mm Scope of delivery: - Heidenhain digital readout - approx. 20 Multifix tool holders - Machine lamp - further accessories

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 01510000031, turning length: 1,350 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, spindle speed (max.): 3,000 rpm, total length: 3,000 mm, total width: 1,800 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 4,000 kg, GILDEMEISTER NEF 520 cycle lathe, year of manufacture 2000 TECHNICAL DATA & EQUIPMENT: Machine number: 01510000031 Operating voltage: 400 V Cedpfxew Rgr Tj Abuerh Frequency: 50 Hz Rated current: 25 A Connection: 14 kVA Control: HEIDENHAIN Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Chuck diameter: 250 mm Cross travel: 260 mm Centre distance: 1350 mm Main spindle: Spindle nose: 8, Spindle bore: 70 mm

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Cjdpfx Absrx Rwnsuorh Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 300 mm, turning diameter: 200 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 300 kg, Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height over bed: approx. 100 mm Travel: X: approx. 100 mm Z: approx. 200 mm Crodow Ivviepfx Abueh The machine is equipped with a tailstock, a three-jaw chuck, a special tool turret including a mobile workbench and suitable accessories.

Condition: excellent (used), Center height 125 mm Distance between centers 500mm Spindle speeds 40-3000 rpm Several accessories Crjdpfxslyrcis Abujh MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2008, operating hours: 50,305 h, functionality: fully functional, machine/vehicle number: 02260008351, turning length: 600 mm, turning diameter: 324 mm, spindle bore: 72 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,080 mm, total length: 4,890 mm, total width: 2,460 mm, overall weight: 6,500 kg, bar passage: 45 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, counter spindle speed (max.): 7,000 rpm, counter spindle bore: 57 mm, number of slots in tool magazine: 12, Equipment: documentation/manual, - Driven tools: 12 - Tool holder: VDI 40 - Power of driven tools: 12 kW - Torque: 10.5 Nm - Speed: 4,500 rpm - Including tool package Cedpfjwun Nvsx Abuerh - Including band filtration system - Including bar feeder MKE HL 12 PN, year of manufacture 2008

Condition: excellent (used), Swing over bed 400 mm Cedjq Dll Dopfx Abujrh Distance between centers 650 mm Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), spindle bore: 38 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 200 mm, turning length: 750 mm, total length: 1,700 mm, total width: 650 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 12 rpm, overall weight: 800 kg, Equipped with: – Tailstock – Multifix tool holder Crjdewxq Icopfx Abueh – RÖHM 3-jaw chuck (Ø 160 mm)

Condition: excellent (used), Swing over bed 320 mm Crjdpfxji Ezhqj Abueh Distance between centers 800 mm Spindle speeds -4000 rpm Control: HEIDENHAIN Manual Plus M Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), spindle bore: 28 mm, turning diameter over bed slide: 300 mm, turning diameter over top slide: 200 mm, turning length: 500 mm, total length: 1,400 mm, total width: 700 mm, total height: 1,600 mm, overall weight: 800 kg, Equipped with: – Multifix tool holder Cjdpfowxq Iiex Abusrh – Four-jaw chuck (Ø 130 mm) – Digital readout by manufacturer HEIDENHAIN

Condition: excellent (used), Swing over bed 212 mm Distance between centers 750 mm Spindle speeds 10-4'000 rpm Cjdsud Nb Ispfx Abusrh Control: HEIDENHAIN Manual Plus Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2017, functionality: unexamined, machine/vehicle number: 5012221, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter: 430 mm, turning length: 760 mm, total length: 1,890 mm, total width: 900 mm, total height: 1,800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, overall weight: 1,700 kg, - Turning diameter over offset: 690 mm - Bed width: 300 mm - Spindle bore: 58 mm - Longitudinal feeds: 0.05 - 0.82 mm/rev - Face feeds: 0.02 - 0.4 mm/rev - Thread (metric): 0.5 - 7 mm Credov Iriuepfx Abuoh - Lead screw diameter: 35 mm - Lead screw pitch: 6 mm - Tailstock quill diameter: 58 mm - Tailstock quill adjustment range: 150 mm - Quill taper mount: MK4

Year of construction: 2013, condition: good (used), Swing over bed 380 mm Distance between centers 700 mm Spindle speeds -2500 rpm Control: SIEMENS Optica Crjdpfehp Razsx Abueh Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V Crsdpfxov Iqr Us Abuoh - Frequency: 50 Hz - Rated current: 11 A - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm - Thread: 6 mm pitch

Condition: excellent (used), Swing over bed 433 mm Distance between centers 1500 mm Cjdpfx Aewuflbobuorh Spindle speeds 20-1600 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 61699, turning diameter over cross slide: 160 mm, spindle bore: 28 mm, turning diameter: 260 mm, center height: 140 mm, turning length: 500 mm, total length: 1,600 mm, total width: 1,000 mm, total height: 1,900 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 71 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Connected load: 3 kW Csdpfx Ajv Iq Uijbuorh - Nominal current: 25 A Equipment: - Tailstock - Multifix Type A tool holder - Steady rest - Four-jaw chuck (diameter: 120 mm)

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm Cedpjwhkdcofx Abusrh SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V - Largest workpiece diameter over cheek: 375 mm - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Incl. documentation - Matching workshop cabinet including accessories Csdjv Irh Djpfx Abuerh

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 308888, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter over bed slide: 300 mm, turning length: 1,000 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, Turning diameter in gap: 480 mm, tailstock quill diameter: 42 mm, tailstock quill stroke: 110 mm, - With ACU-RITE manufacturer digital display - With tailstock, Multifix quick-change tool holder, and three-jaw chuck (Ø 150 mm) - Width in front of faceplate: 115 mm - Lead screw diameter: 28 mm - Thread: 6 mm - Feed (16 metric): 0.03 – 2 mm/rev - Cross slide width: 140 mm – travel: 190 mm Crjdpowxratjfx Abush - Top slide width: 82 mm – travel: 92 mm - Tool holder: 16 x 20 mm

Condition: good (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6970-06, turning diameter: 480 mm, turning diameter over top slide: 240 mm, turning length: 1,000 mm, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, rotational speed (max.): 2,240 rpm, three-jaw chuck diameter: 250 mm, TECHNICAL DATA & EQUIPMENT: Machine number: 6970-06 Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Spindle speed: 11-2240 rpm Spindle bore: approx. 63 mm Centre length: 1000 mm Centre height over bed: 240 mm Swing over bed: 480 mm Centre height over cross slide: 140 mm Swing over cross slide: 240 mm The machine is equipped with a tailstock, a steady rest, a tool holder, and a RÖHM four-jaw chuck, diameter: 250 mm Crjdpfxjw U Tm Sj Abuoh Also includes a three-axis digital readout as well as various tool holders, centres, and tapers REFERENCE NUMBER 13 DIMENSIONS & WEIGHT: 3500 x 1200 x 1800 mm 3000 kg NOTES ON COLLECTION: The item will be available from September 2025. A specific collection date must be arranged starting from 01.09.2025. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck