Used Lasercutting Machine for sale (64,838)

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Gbodpfxjz Ekkxo Akyou Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: excellent (used), Year of construction: 2022, 400mm swing, Gjdpfjz Hatfex Akyobu 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Gedpfjzlpgnex Akysbu

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Godpfxevmwn He Akyobu Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs Godoy Ni Ivepfx Akyebu For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Gbodov Ngraspfx Akysu Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Gbsdpjz N Ambjfx Akyou Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: excellent (used), Eyeletting machine for advertising banners The device is in perfect condition, ready for work. Technical data: 1 head laser indicator Foot pedal operated Gjdpfjz N Sbuex Akyjbu

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Gbedoz Hwvdspfx Akysu Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: Gbedpfsv Ng E Tjx Akyou ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Gjdpjydvzdsfx Akyobu Weight: 1,100 kg can be demonstrated if required

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Gbjdpfxjzxggls Akyeu Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Gsdpfx Aksz Ekfveyjbu Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: good (used), Year of construction: 2013, 480mm swing over bed, Gbsdpfx Akozqr Hnjyju 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, sheet thickness steel (max.): 80 mm, sheet thickness brass (max.): 80 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 290 mm, workpiece weight (max.): 1,400 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 9,100 mm, total width: 3,120 mm, total height: 2,200 mm, warranty duration: 24 months, working range: 3,015 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3000-60000W MACHINE AVAILABLE ON HAND The machine can be loaded into a container. This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*1500mm, 6000mm*1500mm, 6000mm*2500mm; Laser power 6KW-80KW CNC system: FSCUT Max. Acceleration：2.8G Gsdoub Nwdepfx Akyobu BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Gsdpjya H Nksfx Akyjbu Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Gbedpjzi Awhofx Akyou Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Gbsdozav D Djpfx Akyeu Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine Gbsdpfx Akezuxn Teyeu ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Gbsdpfszux Iyex Akyju Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Gbjdpew I Ilijfx Akyeu Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting

Condition: ready for operation (used), For sale: SHAANXI MACHINE TOOL WORKS M1432A universal cylindrical grinder, 1000 mm center distance. Technical specifications: Gbedpfx Akjz Hu Dljyju Manufacturer: Shaanxi Machine Tool Works Type/Model: M1432A Center distance: 1000 mm Max. grinding diameter: 320 mm Center height: 180 mm External and internal grinding Power supply: 380 V / 3 phases / 50 Hz Connected power: 8 kVA Protection: 35 A Machine number: 177 Weight: approx. 5300 kg Operational. Ready for use. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone from 7:00 AM to 3:00 PM.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Gbjdpfxoxghngo Akyeu As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Gbodpfoyzf Nasx Akyou Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Gbodpfxsxftqds Akyju Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,