Used Labeler for sale (1,327)

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total length: 13,830 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Dcjdpfew N Ua Njx Ailon Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.

Year of construction: 1998, condition: excellent (used), Max. roll diameter, unwinder: 750 mm (Shaft 76) Max. roll diameter, rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufacturer: Nikka Research Deutschland GmbH Type: Dcodjzn Ayyopfx Ailsn ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are low; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x Razor blades

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 2 x Packing lines, previously used for salad leaf, consists of; 1 x Multipond MP-14-7100-2500-J plus infeed + gantry 1 x Multipond MP-14-3800-1250-J plus infeed + gantry 1 x VH Centurion SI440 (VFFS) with printer + label applicator 1 x GIC4100 (VFFS) with printer + label applicator Djdpfez Arlhex Ailscn 2 x Loma checkweigher + metal detector combination 2 x packing tables All machinery is fully working and ready to be decommissioned

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications Dcsdjzgw Ebepfx Ailjn • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes Djdpfsyy Nnqex Ailjcn - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, the Hundegger SC3 Speed-Cut, from 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production program CAMBIUM - Automatic cross-section control, Y-axis Dcedpfx Aijz Dga Telen - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis revolving milling head, 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4, from the rear - Automatic discharge of small components to the front - Wood storage blocks with rollers after discharge - Control unit for disposal with operating buttons Upgraded in May 2023 for €8,500: SC 2100 drilling unit 2.2 kW, drilling direction vertical, on the combination support for drilling up to 24 mm 4-sided inkjet labeling system Inkjet 4 CONVEYOR SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL conveyor system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 3900 hours (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH, Reulbacherstraße 18, 36115 Hilders

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Automatic sawing center for PVC profiles, consisting of an infeed buffer, an outfeed buffer, and the main machine, model Thorwesten ASZ 4. Processing length 6,500 mm, max. profile width = 165 mm, max. profile height = 165 mm, Schüco system. Continuously variable cutting angles from 45° to 135°. Dedpfx Aisz Dk Etslocn Automatic optimization and processing of cut-offs. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor belt, as well as an elevating conveyor. WINDOWS 10 operating system. Profile measuring device. Label printer. Two-bag dust collection system. Extended infeed and outfeed buffer depth.

Year of construction: 2020, condition: used, functionality: fully functional, The i-Mark digital cutting machine Djdpfxoz A D Tbe Ailjcn Consisting of the I-Mark feeding system and the Graphtec CE-6000-60 Plus cutting plotter. The i-Mark system, as a digital cutting machine, enables operator-free contour cutting of adhesive films and digital prints on cardboard, screen prints, and other printing products. The movable arm of the digital cutting machine, which is equipped with a vacuum suction system, lifts the sheets from the input tray and feeds them to the plotter. Depending on the thickness and stiffness of the sheets, the i-Mark digital cutting machine can process 40 to 120 sheets. While the machine is running, additional sheets can be added without stopping the machine. The system is equipped with an internal vacuum compressor, which does not require any external air connections. The i-Mark digital cutting machine.

Condition: used, mileage: 12,850 km, power: 90 kW (122.37 HP), first registration: 05/2025, fuel type: electric, overall weight: 2,550 kg, fuel: electricity, color: black, gearing type: automatic, suspension: steel, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, E07 Hill-start assist, F2W Winter package, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat mounting, EY6 Breakdown assistance, B25 Parking brake, electric, EI0 Wireless charging system for mobile devices, T68 Child safety lock for doors and windows in the passenger compartment, Z1M Approval M1, IA0 Wheel formula 4x2, LG7 LED High Performance headlights, XO7 Mercedes-Benz Mobilo with breakdown assistance and extended warranty, EZ7 Active parking assist, R2H 40.6 cm (16) light alloy wheels in multi-spoke design, T78 Sliding door rail cover in vehicle color, Y10 First-aid kit, 804 AEJ X3/1, VL2 Velour floor mats, SF6 Driver's seat, height-adjustable with lumbar support, RD9 Tires without specified manufacturer, H00 Warm air duct to the passenger compartment, NM5 MB-NA 60 2b with flange, low mounting, M-engine speed, C6L Multifunction steering wheel, H10 Seat heating for driver and front passenger, H22 Heated rear window, EM7 2 USB ports in the center console at the rear, Y44 Warning triangle, GA2 Automatic transmission for electric drive, P2F Active safety package, FP3 Mirror package, FP4 Chrome interior package, XC8 VIN visible from the outside, SZ6 Table and illuminated trim elements on the backrest, Z6L Progressive, JH3 Communication module (LTE) for digital services, X30 Vehicle registration certificate, part II, X2W Weight variant 2,550 kg, FQ3 Glove compartment, passenger side, closed, I5T Underbody protection, plastic, RY2 Tire pressure monitoring system on front and rear axle, wireless, CK4 Handle strip above license plate in vehicle color, 054 AEJ X3/2, CK8 Heated steering wheel, XU1 Labels / printed materials in German, IG4 Standard, SK5 Automatic front passenger airbag deactivation, I6I With seat belt, center seat in the rear, W29 Fixed rear windows, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, FR8 Rear, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! Dedpfszqt T Asx Ailjcn -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Dcsdpfx Aiowd Emwjlen Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Condition: used, Year of construction: 2009, Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data Dedpsz Dxtxsfx Ailecn - Year of manufacture: 2009 - Design: low-level infeed palletizer - Changeover: automatic, for different pallet patterns and pallet sizes - Output range: low to medium production capacities - Handled at the site: shrink-wrapped PET bottle packs - Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station - Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery - GEA Procomac Opera palletizer - Complete pallet conveyor system - Pallet magazine - Mother pallet station - Robopac stretch wrapping machine - Logopak pallet labelling system Condition Still installed and under power, in production until October 2026. Inspection under power by appointment. Availability From 1 October 2026. Location: Germany.

Condition: used, mileage: 180,000 km, power: 213 kW (289.60 HP), first registration: 03/2020, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Well-maintained MAN 15-ton flatbed truck with a canopy, with only 180,000 km and 290 hp, featuring a 7.20 m long flatbed and sliding tarpaulin on both sides, Palfinger MBB C 1500 S tail lift, 8.18 tons payload, automatic transmission, automatic climate control, air suspension on the rear axle, trailer coupling, navigation system, reversing camera, cruise control, and more. TGM C short cab Wheelbase 5,125 mm Payload 7,680 kg at 15,000 kg permissible total weight Payload 8,180 kg at 15,500 kg technically permissible total weight Euro 6 D engine with 290 hp and 1150 Nm Drive 4 x 2 Djdpfezmltgox Ailscn Flatbed dimensions (internal): approx. length 7.20 m x width 2.48 m x height 2.55 m Sliding tarpaulin on the right and left sides Palfinger MBB C 1500 S tail lift, lifting capacity 1,500 kg according to the manufacturer Tail lift dimensions: approx. 2.55 m long x 1.80 m wide MAN TipMatic 12 12 OD automatic transmission Front axle with leaf springs, rear axle with air suspension Front axle VOK-06, rear axle Hypoid HY-1130 Front springs, parabolic 5.6 tons, rear springs, air 11 tons Front axle load 5.6 tons, rear axle load 10.6 tons HY axle ratio i = 3.70 Stabilizer for front and rear axles Automatic climate control MAN Brake Matic Controlled rocker arm brake (EVBec) Disc brakes on front and rear axles ABS, ASR, and ESP MAN EasyStart Emergency Brake Assist 2 (EBA 2) Lane-Guard-System IV (LGS IV) Trailer coupling, ROCKINGER 400G 150A with air pressure connections Permissible gross vehicle weight 33,000 kg Trailer load with continuous braking system 19,853 kg Trailer load with SDAH/ZANH 16,000 kg Reversing camera MAN Media Package Navigation Cruise control Daytime running lights Engine brake Multi-function steering wheel 300-liter tank Plastic toolbox, exterior, rear right Toolbox in the cab, center Electrically adjustable and heated exterior mirrors Electric windows Driver comfort seat, air-suspended with lumbar support, shoulder adjustment, and heating Seat covers in comfort quality MAN Media Truck Advanced 12 V radio with 7" color display Hands-free system "Comfort" for 2 mobile phones (MFL and Bluetooth® compatible) MAN sound system Very good and well-maintained condition German vehicle from 1st owner Tarpaulin is labeled Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2610

Condition: new, Year of construction: 2026, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Dcedpeu Ia E Iefx Ailon Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle Dsdoz Ea E Sspfx Ailocn • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor Dedpfxez Ea Ito Ailecn • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Condition: used, mileage: 42,528 km, power: 75 kW (101.97 HP), first registration: 11/2022, fuel type: diesel, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, XZ1 Model Generation 1, V85 Smokers' package, W65 Tailgate, E07 Hill Start Assist, LA2 Light Assist, EZ8 Parktronic, MJ8 ECO Start-Stop Function, CL4 Multifunction Steering Wheel with Trip Computer, JK3 Instrument Cluster (Pixel Matrix Display), MS1 Cruise Control, F68 Heated and Electrically Adjustable Exterior Mirrors, V30 Side Interior Trim Cargo Area, L16 Halogen Fog Lights, MX0 BlueEFFICIENCY Package, EN6 Audio 10, SA6 Passenger Airbag, E1D Digital Radio (DAB), S04 Adjustable Passenger Seat, SB1 Comfort Driver's Seat, SE5 Lumbar Support Driver's Seat, VV9 Roof Frame Tie-Downs, D50 Full Divider, IL5 Left Hand Drive, RG1 205/65 R16 Tires, RM1 M+S Tires, RR6 Spare Wheel with Jack, RS3 Steel Wheels 6.5 J x 16, F66 Lockable Glove Compartment, H20 Heat-Insulating Glass All Around, LE1 Adaptive Brake Lights, BA3 Active Brake Assist, JW8 Attention Assist, C70 Pedestrian Protection, EY5 Mercedes-Benz Emergency Call System, EL8 2-Way Speakers Front, GE1 6-Speed Manual Transmission TSG 380, KP7 SCR Generation 4 Emissions Control, CF0 Standard Suspension, IB6 Series C447 Vito/V-Class, BB7 CO2-Optimized Brake System, EW6 Digital Extra: Remote Services Plus, E57 Trailer Socket Pre-Wiring, MT6 Emission Class Euro 6d N1, M72 HVO Compatible Vehicle, M60 Alternator 14 V / 250 A, MG9 Generator Management, MK8 Speed Limiter 210 km/h, XG6 2,800 kg Weight Variant, J55 Passenger Seat Belt Warning System, HH9 TEMPMATIC Semi-Automatic Air Conditioning, KB5 Main Fuel Tank 70 Liters, A1O Rear Axle Shaft Brand IFA, V43 Wooden Floor, ZM0 Panel Van, HI1 Climate Zone 1 (Cold/Comfort), LC4 Comfort Roof Control Unit, JH3 Communications Module (LTE) for Digital Services, IK0 Complete Vehicle, LC2 LED Light Strip in Cargo Area, CL1 Height and Reach Adjustable Steering Wheel, XO9 Mercedes-Benz MobiloVan with DSB and GgD, FF1 Center Console with Storage Compartment, XM0 Model Update, FY7 Multi-Button Remote Control, MU0 OM 654 DE 20 LA 75 kW (102 HP) 3800 rpm, EY6 Breakdown Management, Z3R Premium Tire Protection (3 Years), Z3K Pro, E34 Buffer Battery for Starting Process, IN2 Wheelbase 3200 mm, Long Rear Overhang, IL4 Region EU/EFTA, M3E Electric Suction Fan Power Level 5, XU1 Signs / Documentation German, VV0 Weld Nuts in Side Panel for Conversions Notice Dsdpsxfwfrofx Ailecn Despite careful review of all our price listings, errors may still occur. Sometimes these are caused by transmission errors in the systems of various platform providers. But mistakes on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Price labeling also cannot be considered a part of the contract. If you attach particular importance to a specific feature in our listing, please let us know at the time of contract conclusion. We thank you for your understanding!

Condition: reconditioned (used), functionality: fully functional, Profile cutting center Scarabeo 55 CNC cutting center with 1 controlled axis, designed to cut PVC profiles with the highest cutting speed and quality. It consists of four different components connected in an automatic line: 1. Automatic bar stock magazine - steel body with 6 grippers moved by belts, driven by electric motors - max. capacity 8-10 profiles (depending on their width) - equipped with a bar presence detection device 2. Automatic Profile Feeding Unit 3. Automatic cutting unit - ø 500 mm blade - electromotor 3 kW, 2,800 RPM - cuts at three main angles: 45° – 90° – 135° - special centering device which allows the blade center of rotation to be positioned in the center of the profile section, so that wedge cuts can also be made automatically - equipped with a special evacuation system for waste and cutting chips - fully enclosed with a front door for free access to the cutting area for calibration, cleaning, and maintenance purposes - pneumatic pistol for blowing chips 4. Automatic unloading unit - automatic discharge device with pneumatic control - flat table for storing cut profiles Dodjrungaepfx Ailjcn - safety guard for moving parts Power: 7.2 kW Weight: 1,500 kg - Industrial computer - TFT color LCD screen - Keyboard - data retrieval from the keyboard or ON-LINE - control of each function on the monitor - Virtually unlimited number of data on the profiles to be cut - label printer with choice of format and letter size - collection of data on the remains of cut profiles (waste) - the ability to collect statistical data (weekly and monthly report) - Automatic fault diagnosis Sizes: width: 2300 mm, length: 12500 mm Completely refurbished, 6 months warranty on parts. Ready for work Available for viewing at the company's headquarters.

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Djdpfx Aez E U D Nsiljcn Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: new, Year of construction: 2026, TA500/1380 Stationary Scissor Lift Table – 500 kg Capacity The TA500/1380 Stationary Scissor Lift Table is a robust hydraulic scissor lift with a 500 kg load capacity, designed for lifting, positioning, and ergonomic handling of loads in warehouses, production facilities, workshops, and assembly stations. The unit simplifies the handling of heavy components, containers, production parts, and other materials that need to be positioned at an optimal working height. Key Advantages of the TA500/1380 Scissor Lift Table 500 kg load capacity – suitable for handling loads, components, containers, crates, and production materials. Lifting range: 200–995 mm – allows convenient adjustment of the working height to suit specific workstation requirements. 1300 × 820 mm platform – provides a stable working surface for larger loads. 400 V power supply – designed for industrial applications and intensive operation. Remote control operation – enables fast and convenient lifting and lowering of the platform. Scissor lift mechanism – ensures stable and even lifting of the load. Safety limit switches – monitor and control the maximum lifting height. Safety toe guard – protects the area beneath the platform during lowering. Net weight of 175 kg – enhances stability during load handling operations. Stationary design – ideal for permanent workstations, production lines, and packing areas. Applications Dcedpfx Ajzdzd Nsilsn The 500 kg stationary scissor lift table is ideal wherever stable load lifting, precise positioning, and improved operator ergonomics are required. Warehouses Lifting and positioning loads, containers, crates, and components. Improving material handling efficiency. Manufacturing Facilities Supplying materials to machines, workstations, and production lines. Supporting smooth production workflows. Assembly Lines Positioning parts at the correct height for assembly and processing operations. Packing and Shipping Areas Providing convenient access to goods during packaging, labeling, and shipment preparation. Order Picking Stations Allowing ergonomic handling of products and containers at a comfortable working height. Quality Control Departments Positioning components for inspection, measurement, testing, or further processing. Workshops and Service Centers Lifting machine parts, tools, assemblies, and technical components. Supporting maintenance and repair work. Internal Material Handling Facilitating vertical movement of loads between different working levels. Technical Specifications Parameter Value Maximum Load Capacity 500 kg Minimum Height 200 mm Maximum Height 995 mm Platform Length 1300 mm Platform Width 820 mm Weight 175 kg Power Supply 400 V UDT Inspection Required Yes

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Dsdpfx Ajrivv Eoilecn Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) Dcodpforivwfsx Ailen The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM Dcedpjz Ea I Tofx Ailjn The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1279895, overall weight: 47 kg, J. Schmalz vacuum layer gripper / palletizing gripper SPZ-800X800-3R36 For sale is a vacuum layer gripper from J. Schmalz GmbH, designed for use in automated handling, palletizing, and depalletizing systems. The gripper is suitable for integration into robot or automation systems and is equipped with the corresponding vacuum/valve technology and sensors. Technical data according to the nameplate: - Manufacturer: J. Schmalz GmbH - Type: SPZ-800X800-3R36 - Article number: 10.01.22.03223/0 - Serial number: 1279895 - Year of manufacture: 02/2017 - Weight: 46.50 kg - Dimensions of the gripping system according to the type designation: approx. 800 × 800 mm The gripper comes from an industrial plant and is in used condition. Scope of delivery and design as shown in the pictures. Djdpfez Ea A Rjx Ailscn Inspection possible by arrangement. Note: Technical data has been taken from the nameplate or existing labeling. For further technical details, we recommend checking the article number with the manufacturer.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. Dcodpfjzmd Uisx Ailen The complete line is offered for sale as one unit.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call. Dcedpoyalqysfx Ailsn