Used Knc 8 for sale (37,405)

Condition: good (used), In this offer you buy a used cutting plotter "Mimaki CJV150-75" Item for sale: Lhedpfxjhg Amaj Ad Nob 1 x Mimaki CJV150-75 with the following equipment: incl. 8 ink colour printing system incl. special colours: orange, white and light black - Print head must be replaced Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function A test printout can be seen in the photo. For more information you can of course contact us personally. Shipping is possible on request!

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm Ledju Nhiqopfx Ad Nehb - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Lsdpfxel Dw Nxj Ad Nohb long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) Lsdpfx Ader Hm R Te Nehb - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: refurbished (used), Year of construction: 2000, Have a Special Folder Completely Rebuilt with New Rollers & New Gears. Anybody interested please feel free to reach out. H&H Folder with the following Details: 8 Plates + 6Plates - Gremser Flatpile Feeder (Year:2012) - Mobile Feeder with height adjustment, 50X70. - First Unit: H&H M7.32 52/8. Working width: 52 (Year:1999) -Second Unit: H&H KL 112 45/6 1. Extended Delivery Ljdpfx Aswcln Eed Nshb 2. Cutting Unit for 2-3 Up Production. (Year:1999) (Working Width: 42cm) 3. Stacker VERY SPECIAL FOLDERS FOR A VERY SPECIAL PRICE

Condition: used, Veeco Dektak 8 Lsdpfewr A Smjx Ad Njhb Working condition and calibrated

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Ledpfx Adox Trw Ij Njhb Operating hours: 10,238 h Weight: 17,970 kg Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: Very large number of tools

Condition: excellent (used), EHT Guillotine Shears Brand: Eisen u. Hammerwerk (EHT) Type: ASS 8-30 Year of manufacture: 1967 Lhedpfx Aowc Rgaed Nob Serial number: 10625 Cutting length: 3000 mm Max. sheet thickness: 8 mm Motor power: 11 kW Connection: 380 V Dimensions: 3950 x 3100 x 1900 mm

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Lhodpfx Adepiay Ss Nsb Tailstock

Condition: used, Year of construction: 2011, operating hours: 3,069 h, machine/vehicle number: 902743, fuel type: diesel, Weights Lhedpfx Adsycppxs Nsb Empty weight: 7.450 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Solideal Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.68x2.32x2.37 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Max. bar capacity: 42mm Lhjdpfx Asxbpp Uod Neb Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt

Year of construction: 2007, condition: used, Serial number: TJ5R2B1X0E105xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22183 Specifications: Lhedjycb Duepfx Ad Njb Model year 2007 Single axle Kitchen Toilet Storage room Tires (see photos) Ready for delivery

Condition: used, Year of construction: 2012, Overview  This steam generator was manufactured in 2012 by the Spanish company ATTSU Termica S.A.. The model RL 2000/8 is a propane gas-fired unit with a production capacity of 2,000 kg/h of steam, designed for industrial applications requiring consistent and efficient heat output. Equipped with a Riello RS190/M T0 burner, the boiler ensures low-emission combustion and high operational reliability. The machine is still installed, in good working condition, and available for inspection. Technical data  Fuel Type: Propane gas Thermal Power: 1,304,000 kcal/h Steam Capacity: 2,000 kg/h Operating Pressure (max): 8.9 bar Test Pressure: 13.4 bar Total Volume: 1,677 L Stack Height: 8 m Stack Diameter: 0.3 m Flue Gas Temperature: 179.5 °C CO Concentration: 2 ppm NOx Concentration: 82 ppm O₂ Content: 6.1 % CO₂ Content: 10.7 % Burner: Riello RS190/M T0 Condition: Installed, functional Inspection: Possible on-site Ledeyb S T Repfx Ad Nohb

Condition: used, Year of construction: 1975, max. wheel diameter 630 mm gear width 180 mm y-travel 560 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm Lhsdpfx Adjyb Sx Ts Nob adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Lsdpfx Aeya Iaqod Nehb Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Lhodpfx Asya Hiqed Nob Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Lhjdpfxjvw Uqae Ad Njb Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: ready for operation (used), Bridge Crane 8 t and crane runway, 20 m overhead crane, SWF Bridge Crane 8 t, single-girder Bridge Crane 8 t, used machine Manufacturer: SWF Ledpfxeya Ewms Ad Nohb Type: 8-20-30 Load capacity: 8,000 kg Crane span: 20,000 mm End carriage wheelbase: 3,150 mm Hook upper position: 4,600 mm Weight: 5,700 kg Hoisting unit: ND04L6, electrically driven wire rope hoist Speeds: Hoisting: 5 / 0.8 m/min Trolley travel: 0–20 m/min (stepless) Crane travel: 0–40 m/min (stepless) Control: Radio remote control and pendant control Electrical data: 400 V; 50 Hz; 10.6 kW Crane runway: Length - 30 m Column spacing - 5 × 6 m Rail top height - 4.776 m

Condition: used, Year of construction: 2007, operating hours: 4,059 h, 2007 | Hamm HD150TT PNEUMATIC 8 WHEEL COMPACTOR (accident unit - for parts only) | Used Other Roller | 4059 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 42 inspection points 25 approved ✅ 11 imperfect ℹ️ 6 issues ⚠️ 📌 Inspector's Comment: This pneumatic rubber tyre Hamm roller had an accident and fell on its side. The machine was still running for a while after tipping, therefore the engine has been damaged, since it was running for a short time without sufficient oil circulation. The engine needs to be checked to assess the damages. The engine oil has been drained due to a leak behind the hydraulic pump, leakage being caused by the machine tipped on its side. The cabin and ROPS structure are broken at several places and need to be replaced. All operational levers and switches are OK, only the cab has been distorted, the front and rear tires are OK, the front tires need air for transport and the engine needs attention or even a replacement in the worst case scenario. Overall the machine, except for the cabin structure and the engine, look good. No operations were tested during the inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40195 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Lhedsya E Iropfx Ad Nsb

Condition: used, Year of construction: 2018, operating hours: 201 h, machine/vehicle number: 2042485, Drive: Wheel Empty weight: 1.875 kg Lifting capacity: 300 kg Working height: 820 cm Lsdpfx Astr Ndhed Nshb Transport dimensions (LxWxH): 2.48x0.81x1.99 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 174 h, machine/vehicle number: CE145544, Empty weight: 1.655 kg Lsdpsx A R Nljfx Ad Nshb Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2012, operating hours: 4,202 h, machine/vehicle number: 901149, fuel type: diesel, Weights Empty weight: 7.450 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Max. horizontal reach: 830 m Transport dimensions (LxWxH): 7.03x2.3x2.37 Additional information Please contact PFEIFER GROUP for more information Lhedpfsxc Dlmsx Ad Njb

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Manulift hand control directly on the crane hook Lhodpfxoxcbnlo Ad Nob Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition

Condition: new, BRAND NEW TRAVELLING COLUMN MILLING MACHINE HEIDENHAIN TNC 640 CNC control system HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, and HR 550 FS electronic handwheel) X-axis: 8,000 mm (optionally extendable by 1,000 mm increments) Y-axis: 1,500 mm Z-axis: 2,500 mm (optionally extendable by 500 mm increments) Worktable: plate field, rotary table, etc. Lodpfx Aeh Ekuced Nehb Automatic universal swivel head 1°x1° - SK 50 DIN69871/A Maximum spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 66 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, Z: 30 m/min Positioning accuracy: 0.040 mm Repeatability: 0.015 mm Chain tool changer: 60 stations (option up to 150 tools) Hinged belt chip conveyor Only enquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW Lsdpfjxf Na Ujx Ad Nohb return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.