Used Kgt 550 for sale (3,002)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: Djdpfxov Say Ao Al Asku - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 2,666 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,120 mm, fork carriage width: 1,250 mm, fork length: 2,100 mm, empty load weight: 7,575 kg, total length: 2,850 mm, drive type: Elektro, construction width: 1,450 mm, Electric four-wheel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 28x12.5-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 21x8-9 Rear tire condition: 0 - 20% Dedoz Ifriopfx Al Aoku Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2020 Additional single hydraulic circuit, integrated side shifter, front and roof windshield, battery charger, 2x work lights at the front.

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Dedpfoxq A Hlsx Al Aoku Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: good (used), functionality: fully functional, The Z-conveyor belt from MFP, featuring timed operation, is for sale. Specifications: Width: 1400 mm, with hopper, 150 mm, along the entire length Inclined belt: 1400 mm Discharge belt: 550 mm Djdszu Iv Tjpfx Al Aoku Belt speed: 3 m/min With timed operation Mobile New belt with 30 mm high cleats, spaced 330 mm apart.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 20,121 h, load capacity: 1,300 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,076 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Dksdpfxsz Idzie Al Aou Fork thickness: 35 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Northbatt Battery type: PzS Battery year of manufacture: 2025 Battery condition: New 4. Valve, work light at the front

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details. • Tool magazine capacity: 24 positions Dksdpfx Alszrw Nkj Aou

Condition: used, Heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry/Joinery Cutting length 3200 mm Dkjdpfjz D Szcex Al Aou Cutting width approx. 1500 mm Main motor 11 kW 3 speeds 2500/3000/4200 rpm Miter stop with length compensation Saw blade up to 550 mm diameter Electrically adjustable lifting and tilting of the saw blade with digital display Machine from retirement sale / first delivery in 2011 Machine has been WORKSHOP-TESTED and is in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser Dodpfxemzbkro Al Aoku STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Spindle speed up to 15,000 rpm, 60-tool automatic tool changer, BT 40, Dkjdpfx Aloy S Rp Te Asu Coolant system, 70 bar, Chip conveyor.

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Specifications: Dsdpfxsykn T Ss Al Ajku Capacity: 550 L Construction Material: Stainless Steel Horsepower: 5 hp Dimensions: 44.8819 x 32.0866 x 39.9606

Condition: used, Year of construction: 2007, Fabricant : WAM Dedpjziqfmofx Al Ajku Model : WBHY 550 PO Year : 2007 Type : Ploughshare mixer Total tank capacity: 550 L Useful tank capacity: 518 L Material : stainless steel Number of ploughshares: 4 + 2 blades Spray nozzle: liquid injection Choppers : 2 (ATEX motors: 4 kW) Main motor power: 18.5 kW Machine dimensions: 130 x 230 x 145 cm Weight : 2000 kg Plan to install an electrical box: this request may be subject to a separate quotation

Condition: used, Year of construction: 2021, Hilltip IceStriker 550 Spreader, Year of Manufacture 2021 | Returned from Rental | Very Good Condition | Immediately Available Compact professional spreader for municipalities, municipal depots, and service providers. For sale is a Hilltip IceStriker 550 from the year 2021. This spreader comes from our rental fleet and has been regularly maintained. The unit is in very good, well-maintained condition, is technically flawless, and ready for immediate use. The IceStriker 550 is the ideal solution for pick-up trucks, municipal vehicles, and smaller winter service vehicles. Thanks to its compact design, wet salt technology, and extensive special equipment, it enables economical and precise winter service operations. Technical Data Manufacturer: Hilltip Model: IceStriker 550 Year of Manufacture: 2021 Condition: Used, Returned from Rental Hopper Volume: 550 liters Drive: Electric Hopper Material: Corrosion-resistant polyethylene Spreading Material: Salt, wet salt, grit, and sand-salt mixtures Dimensions Length: approx. 1,420 mm Width: approx. 1,220 mm Height: approx. 1,060 mm Special Equipment: * LED rear lighting including license plate kit * Warning light for increased safety during operation * White LED work light Djdezzhbvepfx Al Asku * Large hopper (+25 cm) for optimized material distribution * Sensor with alarm function when material is low * Salt pre-wetting unit * Manual spray nozzle Your Advantages: * Well-maintained, returned from rental * Regularly maintained * Technically flawless condition * Compact design for versatile carrier vehicles * Wet salt technology for economical spreading material usage * Very good availability of spare parts * Ready for immediate use The Hilltip IceStriker 550 offers professional winter service technology in a compact design. Thanks to the integrated wet salt technology, material level monitoring, and extensive special equipment, this spreader is ideally equipped for municipal and commercial winter service operations. Inspection and demonstration possible by appointment. Financing and nationwide delivery available upon request. Location: 10114

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm table surface area 400x300 mm Djdpfx Asy D A Dysl Aoku a lot of tools

Condition: new, Year of construction: 2026, functionality: fully functional, 11 kW = 15 hp Cutting height 200 mm Saw blade diameter 550 mm with scoring blades Cutting width to parallel fence 1500 mm Sliding table length 3200 mm Sliding table mounted on hardened steel rollers (similar to Altendorf) The large fence on the sliding table can be swivelled 45° to the left and right; Electric height adjustment Electric tilt adjustment up to 45° Digital display for the tilt angle Machine weight 1250 kg Dksdpfx Aocyd Ncjl Aju

Condition: refurbished (used), Year of construction: 2006, BIGLIA B 550 SM LATHE POWERED + TAILSTOCK CNC GE FANUC Series 18i-TB MAX. MACHINABLE DIAMETER FROM BAR STOCK: 67 mm MAX. MACHINABLE DIAMETER FROM CHUCK: 296 mm MAX. MACHINABLE LENGTH: 550 mm MAX. ROTATING DIAMETER: 580 mm SPINDLE: SPEED: 40 – 4,000 RPM MAIN SPINDLE NOSE: ASA – 6 SELF-CENTERING DIAMETER: 210 mm BIDIRECTIONAL TURRET: 12 POSITIONS (ALL POWERED) Dodpfx Aljzwdm Tj Ajku TRAVELS: X: 173 mm Z: 550 mm B: 600 mm TAILSTOCK SPINDLE NOSE: ASA – 5 SELF-CENTERING DIAMETER: 165 mm NO. 2 POWERED TOOLS INCLUDED VARIOUS MIXED FIXED TOOLS CHIP CONVEYOR WEIGHT: 5,000 KG YEAR OF FIRST INSTALLATION: 2006

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 245011011, cutting width (max.): 550 mm, Cutting machine EBA 550 Multicut, working width 55 cm, with light barriers, program control, rear table cover, year of manufacture 1996, in good condition, immediately available. Dsdpfxjzkcgrj Al Aoku

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Dkodpjzd Sk Hsfx Al Aou Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: used, mileage: 603,000 km, power: 353 kW (479.95 HP), first registration: 04/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, loading space length: 6,300 mm, loading space width: 2,450 mm, Year of construction: 2004, Equipment: ABS, crane, parking heater, DAF CF 85.480 Platform 6,30 m + CRANE + JIB + REMOTE CONTROL / 8x4 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2004 ? MILAGE: 603 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION PLATFORM: 630 x 240 cm (L x W) CAPACITY: 11 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 205/360/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: EFFER 550 H 4/S + 4S + REMOTE CONTROL VIN: XLRAD85XC4E629068 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR Dedpfx Aljy Eu N Re Aoku COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: new, Year of construction: 2022, Exhibition machine Panel thickness: 8 - 50 mm Edge thickness: 0.3 - 3 mm Solid edges up to 5 mm 7" touchscreen Release agent spraying at the infeed Dkedozvapuopfx Al Aju Pre-milling with two diamond milling heads Infrared preheating lamp Top-mounted, interchangeable gluing unit (including a second glue reservoir) Cross-cut saw unit Flush trimming unit R1 Corner rounding unit Nesting scanning rollers Profile trimming unit Glue trimming unit Spraying unit for finishing Smoothing unit New machine, available after exhibition

Condition: used, mileage: 666,085 km, power: 184 kW (250.17 HP), first registration: 12/1999, fuel type: diesel, number of seats: 66, gearing type: mechanical, emission class: euro1, color: white, total length: 14,950 mm, total width: 2,500 mm, total height: 3,250 mm, Year of construction: 1999, Equipment: ABS, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - EBS - Electrically operated mirrors Dodpfsy Hw E Rsx Al Ajku - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 11.967 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 30%

Condition: used, mileage: 935,735 km, power: 184 kW (250.17 HP), first registration: 12/1998, fuel type: diesel, gearing type: mechanical, emission class: euro2, color: white, total length: 12,000 mm, total width: 2,500 mm, total height: 3,250 mm, Year of construction: 1998, Equipment: ABS, power assisted steering, traction control, = Additional options and accessories = Dkedpfx Alezg T Npo Aeu - Autoradio - Double glazing - EBS - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 11.967 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 80%

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Dodswfp Saepfx Al Ajku

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] Dkjdpfx Aeuhbtkel Aou EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Year of construction: 1989, condition: ready for operation (used), An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible. Dkodpfx Aljznx Ige Aou

Condition: excellent (used), Year of construction: 2008, Sprue picker ALS AUTOMATIZATION TECHNOLOGY STV 550 CE. Year 2008 2x PIECES available Dsdouu S Dhopfx Al Asku