Used Keyboard for sale (350)

Condition: like new (used), Below you will find the complete equipment of the offered machine, structured clearly and presented in an organized manner. ⸻ Material Handling & Safety • Work area lighting, rear • 2D code scanner Material Handling • Support console with plastic overlay • 3× ball roller supports (for bending aid / support console / table extension) • 3× brush supports (for bending aid / support console / table extension) • Bending aid first arm with plastic overlay • 2× table width extensions with plastic overlay • 3× table length extensions (for bending aid / support console / table extension) • Parking position right 900 mm Safety • BendGuard ⸻ Automation – ToolMaster (KB29) Machine Base • Stable steel architecture with concrete foundation • Upper tool storage with CNC rotary axis • Lower tool storage with CNC rotary axis • Push-chain manipulators for upper and lower tools • Magnetic gripper system • Position monitoring • CNC turn-over and transfer station for upper tools • Transfer station for lower tools • Right-side machine placement • Control cabinet climate control for ambient temperatures up to 40°C Control • LENZE, integrated into TruBend machine control Safety Equipment • Light curtain (vertical & horizontal) with fixed reflector • Communications rail • MobileControl • Standard safety devices • Side sliding doors • Rear rolling shutter ⸻ Standard Machine Equipment Machine Construction • Robust machine frame • Press beam • Spherical support for press beam with tilt functionality • On-demand servo drive (4-cylinder technology) • Length measuring system (Y-axis) with dynamic deflection compensation • Hydraulic oil fill (lifetime fill) • Control cabinet climate control for temperatures up to 40°C Crowning • Manual wedge crowning Backgauge • 2-axis backgauge (X & R) • 2× backgauge fingers Tool Clamping • Manual upper tool clamping • Hydraulic lower tool clamping Lower Tool Movement • Pneumatically actuated I-axis Control • Touchpoint TruBend • Integrated TRUMPF technology data • Support arm with height adjustment • Network capability • Teleservice via Internet Operator Ergonomics • Foot switch ⸻ Extended Machine Equipment Ksdpfjx Aphgjx Affefa Increased Performance Features • Increased installation height/stroke: +230 mm • Increased working speed at maximum press force Crowning • CNC-controlled crowning Backgauge • 6-axis backgauge Tool Clamping • Hydraulic upper tool clamping Lower Tool Movement • CNC-controlled I-axis Control / Operation • Keyboard & mouse (incl. holder) • Additional monitor • Shop floor programming: TecZone Bend Angle Assistants • ACB Laser – Automatically Controlled Bending • Angle assistant package (ACB Wireless + TCB) Other Operator Aids • MagicShoe function (incl. initial equipment) • MobileControl Pro • Tool indicator • Front work area lighting

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - Ksdpfx Afswdny Tsfsfa in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Kfodpfx Afjx Akm Rofea Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: excellent (used), Year of construction: 2020, Micro Vu Excel 502UC Optical Precision Measurement System Kfsdpfx Afox Ag I Dofea Scale Resolution 0.1 µm. 'XY' Accuracy 2.8+L/200. 'Z' Accuracy 3.0+L/100. Zoom Ratio (Optical, Digital) 36x (12x, 3x). On-Screen Zoom Range 15x - 540x To 30x - 1080x. Capacity 500 x 400 x 250mm. With 4 Station Probe Rack, Calibration Sphere, Surround Guarding, Joystick Control, Monitor, Keyboard & Mouse. Machine Dimensions L1,200 x W1,100 x H1,650mm. Weight 900kg. S/No.EC502UC01461 (01/2020)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Kfsdjxya Rtepfx Affoa Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Kodpfevvi I Rex Affjfa

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 Year of manufacture: 2008 C-type design, fixed table with lowering tank Travels (X/Y/Z): 600 x 400 x 500 mm Distance table to ram: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 operating interface 15” color LCD monitor, mouse or touchscreen, membrane keyboard, and manual control Including CAPA electrode changer: - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm The machine has already been cleaned, serviced, and thoroughly tested. Kfjdoxx Uqfjpfx Affoa We would be pleased to invite you for an inspection and test erosion. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: Kedpfow Sguwjx Affjfa For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 102 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,125 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 15,000 W, spindle nose: Big Plus ISO 40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available from stock. Transport from the warehouse in the Netherlands or Czech Republic by the buyer. Other machine sizes available including screw chip conveyor and all software options such as • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touch screen monitor • 120 GB solid state hard drive • 4 GB RAM memory • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop optional accessories: IKZ cooling through the spindle 20 bar, with rotary union and additional tank with filter Programmable air cooling through the spindle IKZ preparation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ preparation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis model TDE-MV-200 complete with controller and motors LCM 4th Axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors and cables 4th Axis Electrical Package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-200 (200mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-250 (250mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics TS-A135 Tailstock For M-170 rotary table Milltronics TS-A160 Tailstock For M-200 rotary table Milltronics TS-B185 Tailstock For M-250 rotary table 180 mm three-jaw chuck with adapter flange (For Milltronics rotary tables only M-170 and M-200) 230 mm three-jaw chuck with adapter flange (only for Milltronics rotary tables M-250) Tsudakoma 4th axis model RNE-160R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis model RNE-200R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-200R Kfodpfxox Akgwj Affsa Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool measuring probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool measuring probe with optical signal transmission and macros Renishaw NC4-F300 contactless tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block of 4 Programming manual in paper format Machine manual in paper format

Condition: excellent (used), Gerber Technology Industrial Taurus II Leather Cutter Automatic Cutting Machine Material Height Single Ply. Maximum Cutting speed 1.27 m/second. Cutting Acceleration 10.16 m/second. Table Height 0.82-0.85m. Canon Camera Height 2.8 To 5.5m. NOTE - A Loading Charge of £ 100 plus VAT (if applicable) will be added to the invoice. With Monitor, Keyboard, Mouse & Software. Kfedpsx Ag Evjfx Affja

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: Travel ranges: Ksdjw Nadyjpfx Affjfa - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kfodpjvvkfdsfx Affoa

Condition: good (used), Year of construction: 2017, Ref. -No.: 10570 Manufacturer: FERMAT Type: WFT 13 R Year of construction: 2017 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 4000 mm Y-Travel: 3000 mm Z-Travel: 1500 mm W-Axis: 730 mm V-axis: 700 mm Bore Spindle Diameter: 130 mm Rotary Table (Lxw): 2000 x 3000 mm Table Load: 25000 kg Tool Taper: SK 50 / ISO 50, DIN 69871 Form AD Tool changer: Robi 105 Spindle Speed: 4000 RPM Rapid Travel X/Y/Z: 20000 mm / min Main Drive: Siemens 41 kW S1 kW Servo drive: 2 Pcs pinion: 2 Pcs Internal cooling: 70 bar handwheel: Heidenhain HR 550 spindle support: 250 mm Ejection height: 900 mm Probe: Renishaw RMP 60 Table Diameter: 4300 / 2000 Ø / mm Rapid traverse V-axis: 10000 m / min Further information: - Vertical control panel with integrated keyboard and 15-inch LCD screen - Master-slave system, max. load 20 t, ROD encoder on the B-axis - Heidenhain optical linear system, absolute for the V, W, X, Y, and Z axes - Machine with increased accuracy - Control cabinet with air conditioning - Automatic lubrication system - Automatic clamping of accessory heads - Hydraulic device - Spindle bearing cooling unit for temperature stabilization - Chip conveyor as segment conveyor with integrated pump for coolant circulation (including level gauge and filtration) Kfodpexxpb Ssfx Affja - CNC adjustable with paper belt filter - Sump pump with level gauge - Manual milling head UHM 30 with automatic clamping The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2014, operating hours: 5,000 h, functionality: fully functional, overall weight: 3 kg, total length: 500 mm, total width: 500 mm, total height: 200 mm, input voltage: 24 V, input current: 4 A, type of input current: DC, for sell ̶1̶.̶F̶A̶N̶U̶C̶ ̶A̶1̶3̶B̶-̶0̶2̶0̶2̶-̶B̶0̶0̶2̶,̶ ̶1̶5̶i̶n̶c̶h̶ ̶p̶a̶n̶e̶l̶ 2. FANUC STAND ALONE Control Unit - A02B-0323-B804 with 4 options: A20B-8101-0742 (FSSB-3) A20B-8101-0050 (Master CN1) A20B-8101-0770 (ETHERNET CD38R) A20B-8101-0770 (ETHERNET CD38R) ----- 3.Keyboard for FANUC - A02B-0323-C231 you can buy separately Kedpfx Aewq Dpdeffofa

Year of construction: 2001, condition: used, Technical details: measuring range X-axis: 150-300 mm measuring range Y-axis: * mm Table dimensions: * mm measurement range Z =: 450 mm tool diameter: * mm tool taper: * SK compressed air: * bar dimensions: * m machine weight ab.: * kg Kfedexxl Saopfx Affsa clamping surface upper angle: * Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer *

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-C2 12kW / VF1530-12000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 12.0kW - Energy requirements: 73.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 35.0mm, maximum thickness 35.0mm - Stainless steel: Recommended thickness 25.0mm, maximum thickness 25.0mm - Aluminum: Recommended thickness 18.0mm, maximum thickness 18.0mm - Brass: recommended thickness 18.0mm, maximum thickness 18.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Kodpfophpf Nex Affsfa Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, Description (detailed configuration): o 5-axis stage o Modern, expandable user interface with EDX integration and image composition o SE detector o Scintillator BSE detector (retractable) o In-Lens detector o Low vacuum system with BSE detector (retractable) Kedpfoxzqw Tex Affjfa o Fully software-integrated JEOL-EDX system (60mm²) o In-column current measurement o Navigation camera o Live camera o Control console o Desk, PC with Windows OS, 2 x 24" monitors, keyboard

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Kfsdjvvi Htopfx Affoa Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: used, This listing is for a Medite A550 Rotary Microtome Developed and manufactured by experts in Germany Kedpfx Afexzgv Esfofa The fully automatic Microtome A550 is the premium model for use in histology and histopathology as well as in research laboratories and in industrial quality assurance. With this microtome version, both the horizontal feed and retraction and the vertical cutting stroke are motorized. This means physical relief for the user during intensive, long-term use. Alternatively, the cutting stroke can also be carried out manually using the smooth-running handwheel, if, for example, sensitive cuts are necessary for very fragile tissue samples. The handwheel can easily be locked in any position using a spring lever. The proven, high-precision microtome mechanism is developed and produced in Germany and ensures maximum sectioning quality for continuously high sample throughput. The Microtome A550 impresses with its high functionality and attractive design that are focused on optimal ease of use. Settings relevant to the sections are entered via the intuitively operated membrane keyboard with digital display. The background color is freely selectable. The upper rotary push button on the left is used to switch between fine and coarse adjustment and to scroll through the menu. With the middle, larger rotary push button, the specimen clamp is simply moved back and forth. This can also be done using the keyboard. The sectioning speed can be set with the lower rotary push button and two different speeds can be selected for trimming and fine sectioning.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Kjdpfx Aeu S Ahqeffefa Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Kedjdkp D Hepfx Affefa Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Control panel Swivel office chair Kedpfx Ajw Udv Rjffefa Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Further questions can gladly be answered by phone.

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Kfjdpef I Ew Hefx Affja Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Kedpfou Hy Imex Affjfa Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Statistics functions, such as Number of tests Min / Max Mean value Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Condition: excellent (used), Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with a built-in image analysis system, which gives it the ability to "see", so that it can handle assembly automation and inspection tasks with maximum flexibility. It works alongside people and shares the same tasks, without compromising productivity or safety. It offers maximum precision and efficiency while remaining in the same workspace. Kjdpfx Afetym Rzjfjfa The TM5-900 is the ideal cobot for the electronics, automotive and food industries. Load capacity 4 kg Reach 946 mm Weight 22.6 kg Perfect for Industry 4.0 Maximum flexibility and adaptability extremely low costs for automation and maintenance the TM5-900 is a genuine plug & play solution Connect a monitor, mouse and keyboard to the control unit and the TM5-900 is ready for use in just a few steps. Scope of delivery: Techman TM5-900 robot Control unit, connection cable Control unit 2 calibration plates for the camera system 1 landmark Condition: gebraucht / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.