Used Keyboard for sale (350)

Condition: new, Year of construction: 2020, CNC engraving machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technische0.321020121002 Daten: Table size 700 mm x 480 mm Weight: 50 kg External dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories : Lhodpfxjf Tnf Uo Ab Usn Calculator Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve spray With it versch. Collets and cutters - NEW

Condition: good (used), functionality: fully functional, The Labcycler Gradient has the same technical features as its brother Labcycler Basic has. In addition, the Gradient function is active which can be applied by Thermoblock 48 , Thermoblock 96 , Thermoblock 96 alu , and Thermoblock 384. Temperature gradients from 8 to 24 zones are possible to determine the optimal annealing temperature. The Thermoblock 96 and 384 can be applied for high through put. The Triple Block can be used in the Labcycler Gradient without gradient function. The package Labcycler Gradient with Thermoblock 96 and Triple Block should be an interesting tool for all standard laboratories. Ordering Information The Labcycler Gradient must be ordered in combination with one Thermoblock. Additionally, a second or more Thermoblocks can be ordered because the system has a quick-block-changing system. A Thermoblock can be changed in a few seconds. The Labcycler Gradient works at all global line voltages Technical Data Line voltage 85 V to 265 V, 50 to 60 Hz Power consumption Maximum 350 W, standby 25 W Noise Idle 38 dBA, typical 44 dBA, maximum 48 dBA Lhsdpfx Absu Tkbne Uen Display TFT illuminated colour display ¼ VGA, 5.7“ diagonal, 320 x 240 pixel, touchscreen Heated Lid Programable: Pressure 0 to 120 N, temperature RT up to 110 °C Keyboard Numeric and virtual keys Languages English, German, Spanish Programs 680 standard programs, or at least 3000 steps, the last 16 program runs can be displayed any time, re-start function, programmed and manual pause Password protection Configurable up to 64 users Administration Administrator rights: Reading & writing Copy function Intersystem-copy-function with Labcycler 48 & 192s, Labcycler Basic, and Labcycler Gradient Good working condition. Please check out our other listings as well.

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Lhjdpfx Absu Eg A Uo Usn Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: used, Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 5,600 kg, Equipment: rotational speed infinitely variable, OKAMOTO Model OGM-3100 P NC Year of manufacture: 1998 Control system: Fanuc 18 GCA Maximum swing diameter: 320 mm Maximum distance between centers: 1,000 mm Max. workpiece diameter to be ground: 300 mm Max. workpiece weight between centers: 150 kg Grinding wheel: Diameter x Width x Bore: 455 x 75 x 127 mm Wheel speed: Infinitely variable Peripheral speed: 45 m/sec Grinding spindle stock (X-axis): Travel max. 300 mm Swivel angle workpiece table: not swivelling Workpiece table (Z-axis): Travel: 1,150 mm Swivel angle: 0 – 10° Workpiece spindle stock: Version fixed/rotating Mounting taper: MK 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Swivel angle grinding spindle: not swivelling Tailstock type: with manual fine adjustment of taper Quill travel: 30 mm Mounting taper: MK 4 Grinding wheel drive: 7.5 kW Dimensions/Weight Length x Width x Height: approx. 4243 x 2490 x 1860 mm Machine weight: approx. 5,600 kg Standard equipment: - Complete FANUC keyboard with radius compensation for creating ISO programs - Workshop programming graphical software for grinding and dressing cycles with teach function - GAP eliminator - Shoulder positioning - Lamp - Documentation - Levelling screws and base plates Accessories: - Marposs measurement control ø 8 – 92 mm - Various flanges - Various grinding wheels - Band filter Lhodpfx Aoxma Ifsb Uen All information is non-binding, subject to prior sale. Prices: plus VAT Terms of payment: strictly net, before loading.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) Lsdpoxgumcsfx Ab Ujhn - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Ljdpfxsxl Ty Eo Ab Uehn Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Lhodpfedyl H Njx Ab Usn Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: good (used), Soco System Packing Station System 14,800 mm double-deck roller conveyor with 800 mm steel rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9,850 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive and two through-feed flaps 90° curve with conical rollers and two drives for heavy loads 6,000 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive 9,750 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, without drive 6 x Rocholz System Flex packing and work tables Carton magazine Workstation lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Storage shelf Ljdpfx Asxl Rn Tsb Ujhn Width: 2,000 mm Depth: 800 mm 6 x 1,000 mm Transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers Switch and control cabinet Find more items – new and used – in our shop! International shipping available upon request!

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: Lsdogvq D Ujpfx Ab Ushn - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, Year of construction: 2025, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile Lhsdowkpx Ropfx Ab Usn - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: used, Year of construction: 2020, operating hours: 6,000 h, Digital Plotter Cutting System, Manufacturer: Zünd - Switzerland Year of manufacture: 2020, original purchase price verifiably over €80,000 net! Model: G3 M-1600 The machine is fully functional and available for inspection and demonstration at any time. Machine location: Bayreuth ____ Please find below some details from the 2020 order: Working area: Width: 1330 mm, Length: 1600 mm Triple module carrier, laser pointer, adjustable vacuum area Integrated Tool Initialization (ITI) for modules 2 and 3, right side User manual in German included 3-phase 400 V (323 V – 457 V) 50 Hz CEE32 External compressed air supply required Material clearance: 60 mm With appropriate tooling, materials up to 50 mm thick can be cut Workstation Bracket for two modules and three tools, including storage space Monitor mount, compartment for PC. Max. PC dimensions: Width 200 mm, Height 480 mm, Length 470 mm, with compact keyboard (USB + PS/2 ports) Vacuum turbine 1–9 kW 3ph 400 V (50/60 Hz) Automatically regulated vacuum for material fixation, energy-efficient Extension kit for 1–9 kW / 1–15 kW vacuum turbine Enables placement of vacuum turbine up to 5 m from the cutter. Includes bracket for vertical silencer placement Universal Module UM-ZS* For use with various cutting and drawing tools Cutting mat PLP (anthracite) S3/G3 M-1600 Thickness: 2.5 mm, Width: 1410 mm, Length: 1984 mm, 2-piece Cutting tool UCT Universal Cutting Tool, including spring-mounted glide shoe and 2 blade holders types 1 & 3 Blade set for UCT/SCT cutting tool 14 blades: 4 x Z10, 10 x Type 6 Zünd Cut Center Software Suite V3.x Lhsdpexlzyyofx Ab Ujn For intuitive and simple operation of a Zünd Digital Cutter. Includes Cut Server, Cut Manager, Cut Editor for a single PC. Cut Queue For automated workflow and reporting, including unlimited number of hotfolders Camera option For edge detection, “best fit”, “fit to object” and “fit to job” compensation Integrated compact color camera ICC Ensures perfect detection of almost all registration marks, even with low color contrast, poor lighting conditions, and when processing reflective materials. Includes 3 sockets for connecting powered tools Frame grabber card For controlling the ICC camera via Zünd Cut Center Software _____ All information is without obligation; errors excepted. Used machines are exclusively sold to commercial buyers and without warranty.

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 XL" system from the global brand BioMérieux, firsthand from the federal government's inventory. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in November 2013 and continuously inspected and maintained in accordance with the maintenance contract. The last inspection and maintenance was carried out until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition, with no significant damage. Minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. Lhodpfx Aewi Smujb Usn It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Scope of delivery: - Vitek 2 XL including power supply unit - PC with pre-installed software - UPS, monitor, keyboard Dimensions (W x D x H): 1400 x 710 x 670 mm. Weight: 145 kg Shipping will be made within three business days after receipt of payment via insured freight forwarding. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 200 kg. The pallet is oversized! Sales are exclusively for businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, High-Precision Wire EDM Machine AGIE Vertex 1 Year of manufacture: 2008 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): +/- 40 mm Taper cutting: Up to 3° at 80 mm height Lhodpfsxf Dwnex Ab Ujn Available wire diameters: 0.05 mm to 0.2 mm Best achievable surface finish: Ra = 0.05 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg Including AGIEJOGGER handbox for convenient machine setup 15" LCD color display with lift-up keyboard and mouse AGIEVISION control Including AGIESETUP 3D Including AGIEDUO dual-wire system for automatic switching between two wire diameters The machine is cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your site and provide training in control and machine operation.

Year of construction: 2007, condition: used, Serial no. SK3005177, probe measuring system, manufacturer Renishaw, camera system, evaluation unit, manufacturer Renishaw, type UCC2-2, PC, 17" monitor, keyboard, mouse Lhjdpfsxf A Tnox Ab Ujn

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm Lodpfx Absucgr Is Uohn - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2025, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Lodpfx Aewlc Stjb Ushn The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Ledpfsw I Ea Djx Ab Ushn Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 Compact" system from the global brand Biomerieux, firsthand from federal stocks. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in 2013 and has been used very little. It has been continuously inspected and maintained in accordance with the maintenance contract – the last inspection and maintenance was until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition and without any damage – minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Scope of delivery: Lsdpfswkhklex Ab Ujhn - Vitek 2 Compact including power supply unit - PC with pre-installed software - Monitor, keyboard Dimensions (W x D x H): 720 x 680 x 600 mm Weight: 75 kg Shipping will be made within three business days after receipt of payment via an insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 120 kg. This sale is intended exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, body, or health. Please contact us at the address provided for any inquiries regarding prices or technical details.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Charmilles ROBOFORM 550 Year of construction 2006 Construction: - short C-frame with fixed table - Automatically lowerable container Travel: X = 600 mm, Y = 400 mm, Z = 450 mm; Max. Workpiece dimensions (L x W x H): 1200 x 850 x 400 mm Max. Workpiece weight: 1600 kg Max. Electrode weight: 100 kg Min. /max. distance between table and quill: 150-600 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); Incl. 16x electrode changer Incl. C-axis for rotation, indexing and erosion Max. Electrode weight: 100 kg ISOPULSE generator with 64 amps 12" touchscreen with keyboard and handbox Integrated connections: Ethernet RJ45, floppy disk drive, CD-Rom drive Machine weight (net): 4400 kg Machine dimensions (L x W x H): 2750 x 3150 x 3000 mm The machine is currently still being used by our customer and will be dismantled by our specialist staff. Lhedpfx Abeurk Dbe Uen After ordering, the Roboform will be cleaned, serviced and tested by us. Optional: - Transportation - Cooler - Dielectric - Commissioning

Year of construction: 2022, condition: ready for operation (used), Main Drive Spindle motor power 12 kW Tool taper Partly with HSK Number of axis 5 Movement X-Axis Movement 4455 mm Y-Axis Movement 2595 mm Z-Axis Movement 495 mm Additional Equipment Automatic central lubrication: Yes Control cabinet with new main computer: Yes // Control terminal with keyboard and mouse: Yes Handheld terminal for remote control: Yes Vacuum system: 1060 square meters (oversized) Safety device with light barrier and bumper: Yes Drilling head: 12 vertical drilling spindles Controlled central extraction connection: Yes Machine control: "F4Operate", "F4Tollbox", "F4Create" 3D nesting software: F4Nest Powerful machine PC: Yes Ljdjxfw Dhjpfx Ab Uehn This 5-axis FELDER Format 4 Profit H150 22.32 T was manufactured in 2022. It features a 5-axis main spindle with 12 kW power, a 17-fold linear changer, and an 18-position plate changer. The machine includes a comprehensive control system with F4Operate, F4Toolbox, F4Create, and 3D nesting software F4Nest. It also boasts a complete compressed air system and automatic central lubrication. The FELDER FORMAT4 Profit H150 22.32 T machine we have for sale. Contact us for further details regarding this CNC Wood Machining Centre. Application Types CNC Wood Machining

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard Lodpfsun Um Ejx Ab Uehn * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp Lodpfx Abju Uu U Ue Ushn - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2015 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): ±40 mm Max. taper: 3° at 80 mm height Ljdpfjxfvfwsx Ab Uohn Includes F-Module, suitable for wire diameters from 0.02 mm to 0.2 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15” LCD color display with lifting keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg The machine will be cleaned, completely overhauled, and thoroughly tested by our specialist technicians. We are happy to install the machine at your site and provide training for both control system operation and machine handling.

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) Lsdpfx Absgvq A Ej Uohn - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder Lhjdpfsk Egrpex Ab Usn - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set