Used Kempak 200 for sale (16,274)

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Dwodpfszyihuex Al Ajc Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector force: 80,000 N, ejector stroke: 180 mm, plate length: 860 mm, plate width: 570 mm, total length: 6,300 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 14,200 kg, Clamping force: 200t Year of manufacture: 2007 Injection shot weight: 562g Injection unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 ccm Injection shot weight: 562 g Tool clamping system 200/... Clamping force: 200 t Tool plate dimensions: 860 x 570 mm Ejector force: 80 kN Ejector stroke: 180 mm Tool height: 400 mm Opening stroke: 750 mm Maximum distance between plates: 1150 mm Weight: 14200 kg Dimensions (m) length x width x height: 6.3 x 1.9 x 2.3 m Equipment: - 2 x hydraulic cores on the moving platen - pneumatic valve Dwodpfx Aljz Hmm Eo Aoc - robot - 8-zone hot runner system - 8-section rotameter

Year of construction: 2020, condition: excellent (used), functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) Dwsdpfjz Ihmpox Al Ajc - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Dwodpfx Ajz E Sa Isl Aec Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Dedpfxezvf Dqo Al Aowc Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour Dedpfxeudvt Rj Al Aewc + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Djdsz Iuaiopfx Al Aswc Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Z1, Z2: left/right finger V: table compensation Pneumatic supports for sheet metal to the back gauge Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Dwjdpfoz E R S Aex Al Ajc Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Motor No.: 544077 Condition: used – inspected – 100% functional. Dodpjzvymgjfx Al Aswc This is the exact unit shown in the photos that is being sold.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. Dwsdszvzu Espfx Al Aec The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Dwodpfx Alsz I Uc Do Aec Number of dust containers 3 St. Weight ca. 500 kg 200 mm

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Dwjdpozvyw Ejfx Al Aec Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), For sale: KSB ETABLOC G 32-200/752 centrifugal pump with electric motor. The pump has been inspected and is in fully working condition. It features a robust industrial design from the renowned manufacturer KSB, and is suitable for water, circulation, and various industrial applications. Technical data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 32-200/752 No.: 0-118-902 133 Flow rate Q: 10–37 m³/h Head H: 57–34 m Rotational speed: 2950 rpm Motor power: 7.5 kW Voltage: 380 V Current: 14.2 A cos φ: 0.91 Frequency: 50 Hz Protection class: IP54 Insulation class: B Motor: three-phase Motor type: ZKA 132 S-2 Connections: flanged Condition: used, inspected, and in fully working condition. It has normal signs of use and storage, as visible in the photos. The item for sale is a complete KSB pump with an electric motor, exactly as shown in the photos. Dsdezvzviopfx Al Ajwc

Condition: used, Year of construction: 2018, functionality: limited functionality, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for print shops that need to switch flexibly between rigid sheet media and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color gamut: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Dodpfx Aljy Thc Hs Aewc Year of manufacture: [2018] Condition: Technically and visually in good condition. The machine only ran in a single-shift operation and was consistently maintained. Availability: Available [immediately] or by arrangement. Location: [83410 Laufen D] Scope of delivery: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). On-site inspection and print samples are available after prior appointment. More pictures or information on request.

Year of construction: 2017, condition: used, working width 200 mm Dsdpfx Asz Ic Axol Ajwc mains connection 400 V / 50 Hz rated current 25 A connected load 10 kW Through-feed grinding machine with extraction system Condition: Used Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors regarding technical data and specifications; subject to prior sale.

Condition: new, Year of construction: 2012, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2266, table width: 200 mm, 4th and 5th Axis Rotary Table LCM ITALY BRC-200 (NEW / NEVER USED IN PRODUCTION) General Description: Due to changes in production requirements and reorganization of work processes, we are selling a 2-axis rotary and tilting table (4th and 5th axes) manufactured by LCM ITALY, model BRC-200. The table was purchased as an accessory for an ISPER HSP643 machining center and was only installed and tested during the machine acceptance phase. Immediately after functional verification, it was disassembled and stored in the warehouse. The equipment is completely new, has never been used in production, and is perfectly preserved. Technical Specifications and Condition Manufacturer: LCM ITALY Model: BRC-200 Type: Integrated 4th and 5th axis rotary table for CNC machining centers Original machine: ISPER HSP643 machining center Testing CNC: Heidenhain TNC 530 Condition: New / Unused (only acceptance testing) Dwjdpfoz Hvg Uex Al Ajc Documentation: Wiring diagrams and complete original technical documentation from the manufacturer are provided. Support and Interfacing The manufacturer, LCM ITALY, is available to provide direct technical support for interfacing, configuration, and any installation/restoration of the table, even on a different CNC or machine. Sales Conditions Availability: Immediate Inspection: Can be viewed in person at our facility by appointment.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Complete line as shown on photos. Excellent condition. Force 200 t Table 1800 x 1000 mm Number of cycles per 1 min Djdpez D Tdfsfx Al Ajwc Machine dimensions 2700 x 2000 x 4400 mm Machine weight 28000 kg

Condition: used, functionality: unexamined, Digital color printer, Roland Versa UV LEF2-200 Dodpfxszv Snce Al Aowc Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 3,300 kg, We are offering this used Engel ES 200/45 HL-V injection molding machine, manufactured in 1999, for sale. Serial number: 38717 Year of manufacture: 1999 Dedpfx Asz I Uugol Aewc Weight: 3300 kg Type: ES 200/45 HL-V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Dodpfxjz Nxilo Al Aewc Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, rotational speed (min.): 1,490 rpm, input voltage: 400 V, input frequency: 50 Hz, 200 kW electric motor IE4 efficiency class Year of manufacture: 2024 Dsdpfx Alen Tntqe Ajwc 6-month warranty 400 V 1490 rpm 315 l

Condition: used, Year of construction: 2010, 2010 Mahler HWE 4400/2000/4400 Tempering Bogie Hearth Furnace With Pro Therm (Siemens PLC) Control & Switchgear Usable Chamber Approx Dimensions L4,400 x W4,400 x H2,000mm. Holding Time At 600°C 3–4h. Temperature Uniformity (After 4h Hold) +/- 5K. Batch Weight 15t. Furnace Atmosphere Air. Material Of Parts Steel. Heating Electric. 8 Heating Control Zones. 7 Air Circulation Fans. Installed Heating Capacity Approx 1,680kW Bogie (Car) Approx Travel Speed 50mm/s. Bogie (Car) Approx Load Capacity 15t. Number Of Doors 2. Surface Losses Approx. 30kW. Exhaust Air Volume Flow Approx. 1,000–1,200 m³/h. Exhaust Air Temperature Approx. 250 °C. Max. Ambient Temperature 40 °C. Mains Voltage 3 x 400 V Control Voltage 230 V AC / 24 V DC. S/No. 241 09 (2010). Dwedpsz Nh Drefx Al Asc

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Technical Data: Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Dedsz Nw H Aepfx Al Ajwc

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Dwjdpfxsz Nw Hve Al Ajc Technical Data: Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades.

Condition: excellent (used), Year of construction: 1998, Extraction system Manufacturer: Schuko Type: Vacomat 200 Year of manufacture: 1998 Dwedpsz Iq H Eofx Al Ajc Volume flow rate: max. 2,950 m³/h Negative pressure: 2,200 Pa Power: 3.7 kW Extraction nozzle diameter: 200 mm Cleaning: mechanical