Used Kasto Kastoradial M6 for sale (115)

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched Nwjdpfow N S Ecsx Ahyof off, Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: used, Year of construction: 1972, functionality: fully functional, total length: 2,000 mm, total height: 1,250 mm, total width: 1,000 mm, saw blade length: 650 mm, cutting range round steel at 90°: 400 mm, input voltage: 400 V, type of input current: three-phase, cutting diameter: 400 mm, Offered from an estate: Kasto EBS 400 U hacksaw Very robust, cast construction Industrial quality Made in Germany Year of manufacture: 1972 Two speeds adjustable electrically Additional cutting speeds can be set via pulley adjustment. With rapid traverse. Maximum sawing diameter approx. 400 mm Documentation available. 400V three-phase connection One 650 mm saw blade included Cylinder was resealed some time ago; no oil leakage! Fresh oil change Scraper marks on the guides still visible! With fully functional coolant system. This saw cuts 120 mm round steel in only 4 minutes Sold as seen, for hobbyists/repair. Private sale: no warranty or guarantee of any kind. All information given without liability. Returns excluded. Njdpfxsyy R Uxo Ahyswf

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,920 kg, controller model: Siemens Simatic HMI, cutting diameter: 320 mm, cutting speed: 130,000 mm/min, saw band length: 6,300 mm, The machine was overhauled by Kasto in 2016! TECHNICAL DETAILS Cutting diameter: 320 mm Saw band length: 6,300 mm Cutting range: 420 x 320 mm Cutting speed: 20 – 130 m/min Material support height: 950 mm MACHINE DETAILS Control: Siemens Simatic HMI Total power requirement: 15 kW Dimensions & Weight Space requirement: approx. 6.35 x 6.76 x 2.41 m Machine weight: approx. 2,920 kg Pneumatic connection: 6 bar Coolant: 75 l Pump capacity: 40 l/min EQUIPMENT Infinitely variable feed rate Roller conveyor Chip conveyor Technical documentation Nwodpfjywhdfox Ahyef The machine is supplied without robot and loading system. The machine must be reprogrammed by the customer for stand-alone operation.

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm Nwjdpfx Aodbp Eqshysf cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Condition: used, machine/vehicle number: 102 039 1024 07265, cutting area at 90° round: 245 mm cutting area at 90° flat: 220 x 240 mm cutting area in mitre at 45°: 150 mm Nsdpfjcd Tmyox Ahyewf saw blade measures: 400 x 31 x 2 mm stroke speeds: 55 - 155 /min electrical connection: 380 V, 1,1 kW space needed: 1200 x 650 x 1250 mm weight: 340 kg

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg Nsdjz N Amepfx Ahyjwf

Condition: used, Year of construction: 1977, cutting diameter 260 mm band length 480 mm stroke . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nwjdpfoyycy Tox Ahyef About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, cutting diameter 260 mm saw band length . mm table height . mm Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nsdpfx Aheyycyyjyewf If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1991, condition: good (used), functionality: fully functional, Technical Specifications Cutting height: 1310 mm Gooze: 1560 mm Nwodpfx Ahjv Tzqfoyef Cutting length: 6000 mm Saw motor power: 7.5 kW Table capacity: 80 tons

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Nodpfx Ahovyl Dvjyswf Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 15.428 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Njdpfx Ahovyl Ihoyewf Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 16.456 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Nwedjupvrxjpfx Ahyof Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: used, Year of construction: 2008, functionality: fully functional, ATTENTION!: The machine is back on the market due to the buyer’s cancellation. Dismantling of the old machine will begin on November 12, 2025, as the new machine is being delivered. Bandsaw Machine for Processing Large Steel Plates The machine can operate in two different directions: - Across the width of the material: the plates are pushed into the saw frame. - Along the length of the material: the saw blade is rotated 45°, and the saw frame travels along the plate. Sawing Capacities in Manual Operation: - Maximum cutting height with band control: 360 mm (14.2") - Maximum cutting height without band control: 420 mm (16.5") - Cutting height with pressure roller: 280 mm (11.0") - Minimum cutting width: 10 mm (0.4") - Maximum cutting width: 2,000 mm (78.7") - Maximum cutting length: 7,000 mm (275.6") Sawing Capacities in Automatic Operation: - Maximum cutting height (standard): 250 mm (9.8") - Maximum cutting height (option): 350 mm (13.8") - Minimum trimming width: 10 mm (0.4") - Maximum trimming width: 2,000 mm (78.7") - Maximum cutting length: 7,000 mm (275.6") Bandsaw Speed: Infinitely variable - Standard: 13 – 130 m/min (42.6 – 426.5 ft/min) - 14 – 75 m/min (45.9 – 246 ft/min) - Option: 12 – 120 m/min (39.3 – 393.7 ft/min) Feed Rate: Infinitely variable Nodpfx Ahsxvqr Teyswf - 0.5 – 250 mm/min (0.02" – 9.8"/min) Bandsaw Blade Dimensions: - 9,754 x 54 x 1.3 mm (384" x 2.1" x 0.05") or - 9,754 x 54 x 1.6 mm (384" x 2.1" x 0.06") Kerf: 2.1 mm (0.08") Bandsaw Guide: Carbide, replaceable and adjustable Back-guide for bandsaw blade: Carbide strips, replaceable Bandsaw cleaning: Via easily replaceable, driven plastic brush Option: Automatic adjustment Machine Dimensions: - Length approx.: 11,500 mm (346.4") - Width (with door open) approx.: 8,800 mm (346.4") - Height (with laser lamp) approx.: 4,080 mm (160.6") - Working table height: 1,825 mm (71.8") - Approx. weight: 25,000 kg (55,116 lbs) Total power consumption: approx. 28.0 kW (37.5 HP) Saw motor output: approx. 7.5 kW (10.0 HP)

Condition: good (used), Year of construction: 2003, Manufacturer: KASTO | Model: Funktional A | Serial Number: 6420 102 076 | Year of Manufacture: 2003 | Motor Power: 2.5 kW | Automatic metal band saw | Electric main drive | Hydraulic clamping and feed system | Integrated material feed with roller conveyor | Roller conveyors on both sides | Hydraulic material vise | Saw band guide with coolant supply | Control panel with controls and emergency stop | Suitable for bar and profile material | Dimensions: approx. 1700 mm x 1550 mm x 3600 mm (W x H x L) | approx. 890 kg | The stated dimensions are approximate. All other information without guarantee.| Grey | Steel Nwedpfjyicg Ijx Ahyof

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, tilt adjustment saw blade: 45 °, cutting speed: 100 mm/min, section length (min.): 15 mm, workpiece diameter (max.): 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Maximum workpiece dimensions at 90° miter angle: Round: 280 mm Square: 280 x 280 mm and 360 x 180 mm Maximum workpiece dimensions at 45° miter angle: Round: 180 mm Square: 180 x 180 mm and 260 x 180 mm Minimum sawable diameter: 6 mm Minimum sawable length at 90° cut: 15 mm Cutting speed: 19 - 100 mm/min (continuously adjustable) Saw band dimensions: 3,830 x 25 x 0.9 mm MACHINE DETAILS Operating voltage: 400 V Nwjdpfoyr N Nqjx Ahyjf Frequency: 50 Hz Rated current: 10 A Connected load: 2 kW Dimensions & weight Dimensions (L x W x H): 2,400 x 1,800 x 1,500 mm Machine weight: 500 kg External reference: Lot 79

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Nwedpfx Aox Rpdyehyjf Machine Depth 4800 mm

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO Njdpfov Nq Rmsx Ahyowf total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor

Condition: excellent (used), Year of construction: 2004, Manufacturer: KASTO Model: KASTOtec A4 Year of manufacture: 2004 Nodsygl Thjpfx Ahyswf Specification HIGH-PERFORMANCE BANDSAW Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0–600 mm Multi-feed range: 0–9999 mm Min. cutting length: 35 mm Max. cutting speed: 12–120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW 4 m material feed conveyor 4–5 new saw bands included in delivery.

Condition: used, cutting diameter 260 mm band length 450 x 40 x 2 mm capacity 60 degrees: square 240 mm 260 x 180 total power requirement 2,0/2,6 kW Nwodpsyt R Ikofx Ahysf weight of the machine ca. 1,4 t dimensions 2,1 x 1,7 x 1,0 m

Condition: used, Year of construction: 1990, Cutting capacity at 90°: round: 210 mm, square: 210 mm, flat: 240 x 190 mm. Cutting capacity at 45°: round: 150 mm, square: 150 x 100 mm, flat: 150 x 100 mm. Saw blade dimensions: 400 x 30 x 1.5 mm. 2 stroke speeds via pole-changing motor: 16 and 32 m/min. Drive motor: 380 V, 0.9 kW. Weight: 170 kg. Required space: 1190 x 480 x 1300 mm. Nwodeymb Afepfx Ahyof

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Nwjdpfx Ahjvzlgajysf Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Njdpsu Uwygofx Ahyswf Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping Nwodpfeifu Ayjx Ahyef - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nodpfeyqr Utox Ahyswf If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW weight of the machine ca. 2,5 t Nwsdpfx Ahet Tqlbsyof dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.