Used Kaltenbach Kks 401 Na for sale (114)

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,000 mm, total width: 1,150 mm, total height: 1,550 mm, cutting range round steel at 90°: 125 mm, overall weight: 620 kg, saw blade speed: 2,800 rpm, length stop: 2,000 mm, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Bdodstqfvyopfx Amyof

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Bodjvkphgepfx Amyedf Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Bjdoy At Iyepfx Amyedf Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Bdjdpfx Aoqxamgomyjf Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. Bdedpfxjzcqnie Amyjf 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Bjdpfx Aozcqmxemyodf Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: Bdjdpfx Ameyv Uvxeyjf 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Year of construction: 1994, condition: used, Max. saw blade diameter: 350 mm Manual material clamp minimum quantity spraying Bedpfx Aoud Uvksmyedf Digital angle indicator

Condition: used, Column-guided bandsaw, semi-automatic, METORA - KALTENBACH, type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028, year of manufacture approx. 1993 Cutting range: round Ø 380 mm Square 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25-108 m/min, infinitely variable Bdsdpfxsdzqtgs Amysf Material feed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor drive power: 4 kW Power supply: 400 volts, 50 Hz - Fully hydraulic bandsaw in a two-column design - Hydraulic saw head lowering with infinitely variable cutting pressure adjustment - Lowering speed infinitely adjustable - Hydraulic clamping of the workpiece with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the feed side with gear motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating element for coolant and hydraulics - Length stop, TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop base length 6750 mm, stop travel 5650 mm, stop arm can be hydraulically folded up without roller conveyor Footprint of the base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of the stop system: approx. 800 kg in good condition

Condition: excellent (used), Miter circular saw make KALTENBACH type TL 250 for aluminum and plastic profiles Saw blade diameter 250 mm Bsdpfx Amemrq Eveyedf

Year of construction: 2018, condition: used, Manual underfloor circular saw for saw blade up to Ø 250 mm Swivel range for miter cuts -45°/90°/+30° Working area (Round) 90° 80 mm (Round) 45° 80 mm (Square) 90° 70 mm (Square) 45° 65 mm 220 V Bdjdpfx Aoy Nm N Rsmyjf

Condition: used, Year of construction: 1972, 1 used, well-maintained, hydro-pneumatic, semi-automatic cold circular saw for cutting aluminum, non-ferrous metals, wood, and plastic Technical data: max. saw blade diameter 370 mm cutting diameter 120 mm cutting range at 90 degrees: flat 260 x 60 mm cutting range at 90 degrees: square 105 mm cutting range at 45 degrees: flat 200 x 45 mm cutting range at 45 degrees: square 90 mm 0° cut – longitudinal cut: yes 2 speed settings 1500 / 3000 m/min drive power 1.7 / 2.6 kW machine dimensions L x W x H 1000 x 1000 x 1700 mm machine weight 700 kg Accessories / Special features: • Semi-automatic operation: After starting, the workpiece is automatically clamped by the upper clamping cylinder. Once the set feed end is reached, the saw blade automatically moves down and the clamping jaw is released. • Stepless feed • Reversible motor • 1 saw blade • Double miter cut • Longitudinal cut 0° • Spray coolant system Optional accessories: - 1 roller guide right with heavy stop 3500 mm and scale - 1 roller guide left, approx. 3500 mm Price of optional accessories: 1,500.00 € plus VAT. Siegfried Volz Werkzeugmaschinen Bjdpfsbwl Emjx Amysdf Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2000, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Bdodpfsw Rz Shsx Amyof Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW Bdodpfocu Dvuex Amyjf space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm Bdedpoby Hikofx Amyef cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Condition: used, Year of construction: 1988, Saw blade diameter: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Miter cut at 45° round: 130 mm Rectangular: 40 mm Cutting speed: 10 m/min Hydraulically infinitely variable feed speed: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Bdsdjw Tk Ecjpfx Amyjf Weight approx.: 700 kg Space requirement without roller table: 1100 x 1000 x 1900 mm

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. Bdodpfx Amjhzbipjyef - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer Bdsdpfx Amjyak Aneyof - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: good (used), saw blade diameter: 400 mm, – Double mitering Bsdoim Ezgepfx Amyjdf – Mist lubrication system – Protective cap – 400V

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min Bdsdpfx Amermkl Ajyof - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 81266- V 80381, Lg.no. 24394 Hydr. rotary and tilting welding table - Four-axis welding manipulator Technical data: - max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. Table height in horizontal position approx. 1070 mm - Face plate can be rotated + swiveled or tilted - Faceplate can be moved horizontally + vertically, travel 1250 mm - Rotation electr. infinitely variable - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Manual remote control for speed regulation Bsdeugtiuspfx Amysdf - E. foot switch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm Bjdpeg A Rgfofx Amyodf - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pneumatic material clamping devices with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Condition: excellent (used), Condition: very good, item appears almost unused Roller width: 350 mm Height adjustable from 650 mm to 950 mm Bedpfx Aeyuudljmyjdf Price for 3 pieces: 375.-- net

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Bedpfxjv Ncpbs Amyedf Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Condition: used, Year of construction: 2005, functionality: unexamined, Kaltenbach KBS 620 DG — Horizontal Double-Mitre Band Saw, Year 2005 Specifications Cutting capacity 90°: 620 x 350 mm Cutting capacity 70°: 610 x 350 mm Cutting capacity 60°: 570 x 350 mm Cutting capacity 45°: 470 x 350 mm Cutting capacity -45°: 430 x 350 mm Mitre range: +60° / -45° (double mitre) Blade dimensions: 6175 x 41 x 1.3 mm Blade types: Bi-metal M2, M42, M51 Cutting speed: 15–90 m/min (steplessly adjustable) Feed rate: max. 400 mm/min Construction: Double-column, heavy-duty steel frame Control: NC-controlled mitre angle setting Software: Kaltenbach PROFICUT Cooling: Air cooling + micro oil lubrication Bedpfx Aeyrgrpomysdf Weight: approx. 2,600 kg Features: Suitable for cutting steel profiles, tubes, and flat bars. Hydraulic clamping after angle adjustment, steplessly adjustable blade feed, NC-controlled length measurement.