Iveco trakker 440 for sale

Your location was not identified (Edit)
Enter your address
or
Move
5

Truck axes Iveco Meritor EuroTrakker 6x4 8x4 Durchtriebachse MD15 /

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Used distribution axis for Iveco Stralis and Euro TrakkerManufacturer: MERITORComponente: MD 15Diff. Carrier: DTS35A-DTS 35 Part Number: A53200A205534Factory Number Diff.: 07091207038AchsTranslation: 3.40-matching 2nd rear axle also available. The condition for the conclusion of the purchase is a business--to-business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or ch... more
2
EZ 10/2010 , Euro5 ,Allrad 8x8 ,Km.:ca.17000 ,Saddle plate, flatbed Manual transmission, 4 axles, weight: 40t Crane Fassi 1500AXP.28 +FlY Jip/L516 and winch More on request Nljzt more
6
Vehicle - Make: Manitou - Type: MT1440 - Drive type: Diesel - Load capacity: 4000kg - Load center: 500 - Lifting height: 13600 mm - Reach: 0 mm - Built: 2014 - Engine hours: 1780 - Internal No.: B080719 _____ Mast data - Mast type: Telescope - Lifting height: 13600 mm - Height: 2605 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm 2rihay _____ Dimensions ... more
6

CHARMILLES ROBOFIL 440 - 2001 Wire cuting EDM machine CHARMILLES ROBOFIL 440

Rolle, CH, SwitzerlandSwitzerland dealership location
18294 km
2001
ready for operation (used)
  Machine working. Exchange due to new purchase. Dismounted and ready to be delivered.   X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Berjuom0qy Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They a... more
6
Bosch R600B CNC Systhem Board Mat.Nr. 050734-104401 + board 050764-102 , used, normal traces of use, 100% functional, supplied with photos Stfwlw more
0

Cutting mill Condux Schneidmühle Condux Typ CS 150/440

Zuzenhausen, GermanyGermany dealership location
18019 km
ready for operation (used)
Power: 5, 5kW Suitability: Rubber, plastics, organic substances G0sj7sf 2 x 2-blade rotor 2 x 2 Statormesserreihen Rotor diameter: 150 mm Working width: 440 mm Inlet cross section: approx. 150 x 440 mm Drive: 5, 5kW 4 x available (Engine numbers: 1086, 1087, 1088, 1089 / second-hand machine) more
3
Bystronic Bystar 4020 4400w Byvision Year 2005 Model: Bystar 4020 Tot. Weight: 6500 Kg Max weight of sheets Kg/m²: 160 Metal sheets dimension : 4000×2000 mm Axes Z: 170 mm Max. thickness: Steel: 20mm Inox: 15mm Alluminium: 8mm Bfg0t7ggut Acceleration axes X/Y max 3,0 m/s² Cutting speed max. : 50m/min Contact us for information more
11

Edgebanding Biesse Artech Akron 440

Hooglede-Gits, BelgiumBelgium
18289 km
2009
excellent (used)
Machine will be available around mid-October 2019 and is ready for use. Steered bridge Operation via 10" colour touchscreen. Motorised walk-in ruler. Front sprinkler system. Diamond pre-cut cutter. Adhesive box. Motorised pressure zone with 1 large and 2 small pressure rollers. Double-cut saws. Motorised fine milling machines. Motorised double angle cutter. Manual PVC scraper. Flat scraper. Rear sprinkler system. Polishing brushes Dimensions machine : 5000x1500x1500 mm. Bf... more
3
4-axis CNC quick radial drilling machine Working table: 1800mmx 600mm Boom travel distance 1050mm Tool holder SK 40 Coolant device Thread cutting device Nn732 Docomentation Test protocol for mechanics and electrics more


iveco trak...
daily

New machines via email!

Stay updated!
5

Gear Iveco Getriebe Euro Cargo 2855 B 6 / 2855B6

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Used manual transmission with auxiliary drive for Iveco Euro Cargo tipper with rope train circuit type: 2855 B 6Parent number: 8871007legisll. VAT must be deposited as a deposit when exporting outside the EU, ALL ANGABEN WITHOUT WEWEAR, ZWISCHENVERKAUF + IRRTUM VORBEHALTEN condition for the closing of the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license ... more
4
Bosch 052146-204401 Board made of TR15-R amplifier module , serial number according to photo , used, normal traces of use, 100% functional, supplied with photos Bfgf2kiew7 more
3

Cutting mill Condux Schneidmühle Condux Typ CS 320/440-3A

Zuzenhausen, GermanyGermany dealership location
18019 km
ready for operation (used)
Power: 15 kW Suitability: Plastics, wood, organic matter 3 knife rotor (rotor knife 3x2) 3 stator knife rows Rotor diameter: 320 mm Rotor width: 400 mm Inlet cross-section: About 360 x 440 mm Teg9hhoi (Machine number: 11060/used machine) more
1
turnable head left and right 90° with drilling capacity Ptt2ja more
10
We offer you: Sub-apparatus Manufacturer: Herbert Lindner • Disc: approx. 440mm Hookers: 8 pcs. Groove width: approx. 14mm without power cable SKU: 000001 Figt9ge On request, you will of course receive a regular invoice with VAT. PLEASE ALSO TAKE NOTE OF OUR OTHER AUCTIONS - YOU CAN ALSO VISIT OUR ITEMS ON SITE! Changes and errors in the technical data and data, as well as Intermediate sale reserved!*** more
4
4-axis CNC quick radial drill Work table 8000mm x 800mm Zulzouaw Travel: X: 8000mm Y: 1050mm Z: 200mm W: 400mm Tool holder SK 40 Coolant device Thread cutting device Documentation Test protocol for mechanics and electrics more
12
L&Z Lathe V-Trade Bfgoub2yml Type: BMT 1440ZH Y.O.M. 2009 Tip width 1000mm. Turning diameter over bed 356mm, over cross slide 216mm, in the crumpling 508mm. Spindle bore 38mm. Speeds 40 - 1800 rpm. Advance surges long and plan. Thread cutting: Metr. Inch. Module. Dp. Tailstock MK 3. Facilities: 3 axes digital display. 3 Baking chuck 160mm with change jaws. 4 Baking food 200mm. Multifix with 1 piece steel holder. Coolant device. Working light. Not - Off Spindle brake. Centerin... more
6
Bosch R600B CNC Systhem Board Mat.Nr. 050734-104401 + board 050764-102 , used, normal traces of use, 100% functional, supplied with photos Ekdnf9x more
13

Edge banding machine premilling Biesse Akron 440

Kezmarok, SlovakiaSlovakia dealership location
17204 km
2010
good (used)
I sell the edge banding machine Biesse Akron 440 year 2010: Premilling Edge banding End cutting saws Dmtiz93 Tilting radius milling pneumatic adjustable Corner rounding 2-motor Radius scrapers Glue scrapers Polishing brushes Separation fluid spraying + 1 additional glue tank 303.000 meters edgebanded. CE Mark. Good condition! more
7

Injection moulding 101 - 200 ton. DEMAG Concept 1250-440

Cerreto D'Esi, ItalyItaly dealership location
17814 km
2000
ready for operation (used)
Tonnage:125 Clearence between tie-bars:475x450 Screw diameter:45 Calculated shot volume:293 Min/Max mould thickness: 230-460 Core pull: 1 Bfae3soqdo Euromap: 1250-440 Mov. plasten stroke: 450 Air ejection: 1 more
8

Shredders PR4400 Primary Reducer

bt70 3ey, United KingdomUnited Kingdom dealership location
18389 km
ready for operation (used)
SSI’s PRI-MAX®️ PR4400 is a heavy duty, low-speed, high-torque industrial primary shredder designed for high capacity volume reduction of the toughest materials considered by others to be “non-shreddable”. SSI’s PRI-MAX®️ PR4400 primary reducer is more than a heavy duty shredder. It combines ripping and shearing technologies to shred, tear, pierce, chop, split, flatten, crush, break and reduce materials. The unique cutter profiles and patented open cutting table design are key to achieving high ... more
5

Cabins Iveco Stralis

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Iveco No.: VDO 504156164Siemens No.: 1557.0001010002 dashboard of Iveco Stralis, used, different versions on Lager.Bedingung for the purchase is a business-business of the buyer and their appropriate proof. Please send us proof of your business upon completion of the purchase-commercial activity (E.g., tax identification number, business license or association or Chamber card). Shipping delivery takes place after evidence of business-Gewerbetätigkeit.Verkauf and delivery be made solely on the ba... more
5
Saw round material up to diameter 440 mm Saw flat 800 mm x 440 mm Masch.# 3 4015 Bauj. 1981 Stepless sawmill drive Hydraulic cut pressure regulation adjustable sawing Tub for spa fishing & cue-meal drain Spreads hydraulic Hydraulic Saegeband voltage Engine drive 4 kw, hydraulics 1.1 kw Cutting speed continuously 16 – 80 m/min Band mass 5400 x 41 x 1.3 mm Material diameter 440 mm Masch.Mass: 2580 x 990 x 1480 mm Be9rnwvb0e Weight about 1900 kg more
1
Type: Ti Bdmc2gjrfe With barfeeder ----- Барфидер в комплекте more
7
Producer DEMAG Type Ergotech System 150-440 H -120 V 2K Year 1999 Clamping unit Clamping force 150 ton Opening stroke 500 mm Distance between tie bars 500 x 500 mm Mould height min. 250 mm Mould height max. 660 mm Platen size (h x v) 750 x 750 mm Injection unit Screw diameter 45 + 35 mm Injection volume 293 + 165 cm³ Shot weight 260 + 149 g Injection pressure 1466 + 2020 bar Measurements and weight Hvmupk9 Dimensions 5,65 x 1,7 x 2,0 m Machine weight 8400 kg more
7

Injection moulding 501 - 3000 ton. SANDRETTO S7 650/4400

Cerreto D'Esi, ItalyItaly dealership location
17814 km
1987
ready for operation (used)
Tonnage:650 Clearence between tie-bars:820x820 Screw diameter:90 Min/Max mould thickness: 250-900 Robot connection Euromap-12:Yes Core pull: 2 Mov. plasten stroke: Uan9r8e8 920 more
7

CORRECTORS Réctifieuse cylindrique exter SMAL 440X2800 440x2800

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
Serial number v7420 S/ bench (mm) 440 Distance between points (mm) 2800 Machine Weight (T) 11 Bzneltlu more
3

Gear ZF Getriebe 12 AS 2330 TD / 12AS2330TD Iveco Stralis

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Transmission ZF 12 AS 2330 TD, for IVECO Stralis, condition for the closing of the purchase is a business---business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
3
MICROMASTER 440 without filter 3AC500-600V+10/-10% 47-63Hz Constant torque 55kW Overload 150% 60S, 200% 3S square moment 75kW Z30wlobd 850x 350x 320 (HxWxD) Protection class IP20 Ambient temperature 10+50°C without AOP/BOP more
9

Tow truck Iveco 75E17 - aus 1. Hd

Essen, GermanyGermany
18031 km
2004
excellent (used)
Tow truck Iveco Mumenk Type 75E17 total permissible weight 7.49to Built in 2004 from 1. Hd only about 169,000 km Tüv new Top Condition Air suspension rear Ball head trailer coupling 6 gear Green environmental badge Hydraulic winch more
15

Street Sweeper Iveco Johnston

Genk, BelgiumBelgium
18150 km
1999
reconditioned (used)
Iveco Johnston Street sweeper WITH DEUTZ REVISIONMOTOR is in perfect condition. It is built in 1999 and is ready for work immediately. Please watch the linked youtube video to see the machine in its working state. Bff2fptpxc more
15

Truck Iveco Tipper

Eching, GermanyGermany dealership location
17823 km
ready for operation (used)
7.000 €
Offernot incl. VAT
Another 8 days
Truck Iveco Tipper approx. 1 piece truck Iveco tipper, FIN WJMB1VNS10C115060, 228 kW, 7.790 ccm diesel, ez: 24.03.2003, two-axle, tipper, color: orange, charging arm Hiab 085 behind cab, device for sliding shield, characteristic. PAF-W 294 from location 84174 Eching Item number: 000063288 Location: 84174 Eching Nn0sj more
3

TOURS Tour parallèle JESSEY STUDTURN ST 1440 X 750 STUDTURN ST 1440

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
Serial number 7955 Year 1995 S/ bench (mm) 360 Pin bore (mm) 42 Th8f7r0y Distance between points (mm) 750 admitted in the broken (mm) 560 Machine equipped with: Fixed bezel Machine Weight (T) 0.9 more
2

Gear ZF 12 AS 2301 / 12AS2301 IT MAN / Iveco / DAF

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
Transmission ZF 12 AS 2301different executing and without retarder suitable for MAN, IVECO, DAFCondition for the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on th... more
8
Nuaire NU 440-600-E Laminar Flow Sterile Workbench Description Nuaire Lamina airflow Class II Type A Model NU 440-600-E. UV lamps in the utility room. Working height 76 cm. External dimensions: 1972/835/1600mm Original price 8.181 Euro TECHNICAL DATA Ctvsaaey Model NU-440-600E 230 V / 50-60 Hz / 50-60 Hz Nominal size 1.8 m (6 ft.) Cabinet style Table top/console with optional base frame Sash height 10" (254 mm) / 8" (203 mm) External dimensions (W x D x H) in. mm] 77 ⅝ ... more
6
- Audio system: Radio MAN basic Line (radio / CD) - Window jack electric - Speed control system (Tempomat) - Central locking - Towbar: Ring spring 2040 G 150 B - Automatic climate control - Additional remote/fog lights with turn-off light - Manual gearbox ZF 16 S - Wheelbase 3.90m - Multilift teledroper - German approval - TÜV NEW - Track bar newly built into MANjt - - Engine brake, leaf-air suspension, differential lock, color glazing, underrun protection First reg... more
2

Refrigerator Labcold RAFR44042

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
18409 km
ready for operation (used)
Bd9r0sf79q Condition Used Stock Number 00002 This listing is for a Labcold Advanced RAFR44042 Double door Refrigerator more
15
In the PDF file a list of the complete contents. Nn7b9 We sell everything in one piece. If you want more photos / videos, you can request them. Everything is sold excluding dismantling. more
7
cutting diameter 440 mm Sdnulgmh saw band length 5200 mm cutting width 440 mm dimensions of saw-band 5200 x 1,1 x 34 mm band speed 19 / 46 / 65 / 90 m/min capacity 90 degrees: square 440 x 440 mm cutting range flat 610 x 440 mm capacity 45 degrees: round 440 mm capacity 45 degrees: flat 500 x 190 mm capacity 45 degrees: square 420 x 420 mm cutting range round 30° = 330 mm total power requirement 3,7 kW weight of the machine ca. 1 t dimensions of the machine ca. 2,7 x 1,2 x 1,6 m Electric 380 ... more
2

Gear ZF Getriebe S 5-30 / S5-30 Iveco-Magirus

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
ZF Gear S5-30, S5-30, Iveco Magirus 130R80, 130R81 ... If present several times, the condition for the conclusion of the purchase is a commercial activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on th... more
6
Vehicle - Make: Jungheinrich - Type: EJC 214 3F440 - Drive type: Electric - Load capacity: 1400kg - Load center: 400 - Lifting height: 4440 mm - Reach: 0 mm - Built: 2007 - Engine hours: 2695 - Internal No:: 280317-317 _____ Mast data - Mast type: Triplex - Lifting height: 4440 mm - Height: 1950 mm - Free stroke: 1500 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimen... more
5
table length:3000 mm table width:1500 mm burner heads: material thickness:Stahl 0,8 - 25 mm material thickness:Rostfreier Stahl 0,8 - 25 mm material thickness:Aluminium 0,8 - 12 mm beam diameter:20 mm laser source:Bylaser 4400 laser medium:Co2 Be2oyethxv total power requirement:62 kW weight of the machine ca.:13 t dimensions of the machine ca.: m Operating hours: approx. 53680 hours Laser switch-on hours: approx. 34900 hours included: - Changing table system with portal feeder: Vacuum port... more
4

Refrigerator Labcold RAFR44041

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
18409 km
ready for operation (used)
Gvstxs Condition Used This is a listing for a Labcold Advanced RAFR44041 Double Door Refrigerator more
6

EDGES IN GLUE - BANDING ARTECH AKRON 440 A X

Pollenzo, ItalyItaly dealership location
18217 km
ready for operation (used)
Subfamily: Edge gluing machine one-sided  Type of attached edge: thin edge strong edge solid wood  Adhesive system: EVA  Max height of the panel: 60 mm Min. length of panel: 140 mm Min. width of panel: 50 mm Min. edge thickness: 0.4 mm ... more
2

Gear ZF 4 S-120 GP + Z90 / 4S120GP+Z90 Iveco-Magirus

Emmerich, GermanyGermany dealership location
18056 km
ready for operation (used)
ZF 4S-120 GP + Z90 for IVECO MAGIRUS ... The condition for the conclusion of the purchase is a business--to-business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
1
Toolchanger: 40 positions Renewed Siemens control (1998) Including many tools spindledia: 100 mm distance spindle-column: 1250 mm Zy0rlxrv distance spindlenose-table min/max: 150/950 mm max workpieceweight: 3000 kg clampingdimensions: 1600 x 800 mm 6 T-slots - width: 18 mm more
2
Siemens 4AP4403-8LB Transformer, used, 100% functional, shipping costs please request separately! Please ask for transport charges! Hmoq8yb more
9

Nephelometer Becton Dickinson 440910

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
18409 km
ready for operation (used)
Condition Used Bd9rfncorj This listing is for a BD Becton Dickinson PhoenixSpec Nephelometer 440910 more
4
Three-phase motor, electric motor -Output 5.5 kW -Speed 1440 rpm -Voltage 380/660 V -Wave Ø 30 / 80 mm Bffryf8x2p -Type B5 -Protection class IP44 -Price per piece -Number of 7 -Dimensions 520/286 / H330 mm -Weight 86 kg more


iveco trak...
daily

New machines via email!

Stay updated!

to

to

Edit search
IVECO TRAKKER 440
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.