Used International 9300 for sale (10,012)

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Iodpfx Aheupbf Dj Njtb Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Itedpfxjhgnd Aj Ah Njb Weight 260 kg Good condition

Condition: used, Year of construction: 2008, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm Control FANUC 320iA 3 x internal grinding spindles 2x HV-X 100-90000/3 Housing diameter: 100 h5 mm Spindle speed max: 90000 min/1 Nominal/max. power: 2.5/3.0 kW Spindle nose: D10/18 Spindle cooling: Water 1x HS80c 120000/1.1 Housing diameter: 80 h5 mm Spindle speed max: 120000 min/1 Nominal/max. power: 0.8/1.1 kW Spindle nose D06/12 Spindle cooling: Water 1 x external grinding spindle: MMO-100 HSK-C50/4 Diameter: 100 h5 mm Maximum speed: 3770 min/1 Nominal/max. power: PS1/PS6 - 6.0/7.0 kW Clamping system: HSK-50/M12 Grinding wheels: Diameter 125-200 x 2-20 mm 1 x dressing spindle MHF-72 D40/16 Housing diameter: 72 h6 mm Maximum speed range: 16000 rpm Power S1/S6: 400/500 W Spindle nose: 40 mm/8xM5 on TK 56 mm Spindle nose: 40 mm/4xM5 on TK 32 mm 1 x measuring probe (longitudinal positioning) Etamic C25 Abrichteinheit für das automatische Abrichten mit Hydraulisch einschwenkbarem Arm. Präzisions Positionierung und Einrastung mittels Konischem Bolzen, geschliffen und gehärtet. Schwenkbewegung : Hydraulisch Schwenkgeschwindigkeit : Einstellbar 1 x Messtaster (Längspositionierung) Etamic C25 X-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut Z-Achse Fahrweg: 400 mm Auflösung: 0.0001 mm Vorschub: 0-10'000 mm/min Messung: Glasmassstab Absolut B-Achse Fahrweg: +60°..- 91° Auflösung Winkelmessgeber: 0.0005° Auflösung Antrieb: 0.0001° Vorschub: 25°/Sek Messung: Winkelmessgeber Absolut Revolver Anzahl Position 4 Ijdpfjx Dxw Hjx Ah Netb Zeit beim Wechseln 5 Sek Möglicher Spindeldurchmesser: 0 100 mm Werkstück- Spindeldrehzahl max.: 1'000 min-1 Spindelstock Leistung max.: 1.8 kW 960-41 Spindelnase: A2.4/MK5 Ausrüstung Anschnitterkennung Anschnitterkennung und Prozessoptimierung zur Optimierung des Schleif- und Abrichtprozesses und zur Verkürzung des Luftschleifens. Signal über Körperschallsensor auf dem Werkstückspindelstock aufgebaut, bestehend aus: -1x AE-Auswertsystem mit Display AE4100 -1x Kabel -1x Software und Anbauaufwand inkl. Material Sensor und Empfänger für Abrichtspindel - 1x Ringsensor - 1x Ringempfänger Sensor und Empfänger für Spindelnase A2.4/MK5 Elektroschrank mit CNC-Steuerung FANUC 320i A und Bedienungskonsole mit Bildschirm 15" Color LCD TFT 1024 x 768 Bedienpanel 55 Tasten und LEDs PC Tastatur QWERTY Intel Pentium III 866 MHz Windows XP Professionnal Combitec HMI für FANUC 320i A Standard Programmiersprache nach DIN/ISO Werkstattorientierte Schleifzyklen (WOP) Mobiles Handrad mit Wahlschalter 0.001, 0.01, 0.1 mm und Achsenwahlschalter Vorschub Korrektur über Raster-Potentiometer 0-100 % Spindelgeschwindigkeits-Korrektur über Raster-Potentiometer 50-125 % RJ-45 Ethernet mit TCP/IP Software und Zubehör für das Radius und Konus schleifen mit PC Simulation und CNC-Bahnkontur schleifen Vollautomatisches Schleifen eines Radius G71 und/oder eines Konus G72 ab einem bestimmten Winkel auf einen...

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Ijdpfjxyllvjx Ah Njtb

Condition: used, STUDER CT 960 is an Internal grinding machine delivering precision, high accuracy and reliable performance. Working capacities: centre height 150 mm, grinding length 150 mm, X/Z travels 400 mm, wheel diameter 250 mm, spindle hole 35 mm; B-axis +61/-91°, rotatable head -5/+275°, turret with 4 spindles. Main specs: spindle speeds 6000 / 45000 / 60000 / 90000 rpm; X/Z feeds 12 m/min; air 6–10 bar; 3x 400 V 50 Hz; total power 34 kVA; weight ~4050 kg; dimensions L 3218 × W 2256 × H 2300 mm. Equipment: coolant system, measuring probe, diamond redresser, spindle cooling, flanges for internal grinding, tool holders, 3-jaw chucks Ø100/125/160, magnetic chuck Ø125/300, tool cabinet, lamp, fire system, electronic handwheel, external grinding spindle 6000 rpm, calibration accessories. Enables tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Isdpjxx U Auefx Ah Nstb

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 03.2456, CNC Ibroching machine Arthur Klink RISH 6.3X1000X400 Ijdpfxjirwiqs Ah Njtb Renewed in 2016

Condition: excellent (used), Year of construction: 1978, Machine can be inspected under power Iedpfewz Emlex Ah Notb

Condition: used, Year of construction: 1983, Min./max. diameter of ground bore: 10-250 mm Max. grinding length: 500 mm Max. swing diameter: 400 mm Max. workpiece length: 1,000 mm Workhead spindle speed: 25-450 rpm Grinding spindle speed: 8,800-31,000 rpm Itjdpfx Asx Alaloh Neb Workhead swiveling range: 15° Total power requirement: 9 kVA Machine length x width: 4,400 x 2,020 mm Total machine weight: 4,400 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 05972978, input voltage: 380 V, total length: 10,560 mm, total width: 2,400 mm, total height: 1,250 mm, year of last overhaul: 2022, input current: 79 A, heating capacity: 47 kW (63.90 HP), temperature: 80 °C, type of cooling: air, plate width: 1,400 mm, infeed width: 1,500 mm, power: 47 kW (63.90 HP), Equipment: documentation/manual, Muller Dryer M-Jet International 1500 year of manufacture 1997 Fully operational 1500mm belt width up to max. 80 degrees With Viprotech stacker Optionally available in combination with various screen printing machines and accessories. Itsdpfxexz Rzfj Ah Nsb

Condition: used, Year of construction: 2005, Type Honanlage Itedpfx Ajxwdxish Neb Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Internal item no.: 25087 Itjdpfx Ahextpbbs Nob Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Itodpfxjwz I Aco Ah Njb Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 throat 195 mm Ijdpsdzp S Njfx Ah Notb Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg good condition

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - center height : 102 [mm] - Max. part length : 230 [mm] - X/Z stroke : 450 / 200 [mm] - Rapid traverses rates (X/Z) : 12000 [mm/min] SPINDLE SUPPORT - Number of spindles : 1 - Spindle speeds : 42.000 [rpm] Itsdpfx Aoxylwfjh Nob - Power : 3 [kW] PART-HOLDER HEADSTOCK - Speed : 1500 [rpm] - Power : 1.4 [kW] - Spindle passage : 28.6 [mm] - Type of cone : A2.4/CM5 - B axis adjustment angle (manual) : +/- 2 [°] - C axis indexing precision : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 34 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS - Number of hours under power : 1022 [h] EQUIPMENT - CNC : Fanuc 0i-TFP - Software StuderSIM - Coolant tank - Coolant through spindle - Oil mist extractor - Diamond grinding device - Workpiece probe

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Itedjxyk S Uspfx Ah Nob

Condition: ready for operation (used), Vertical Grinder Matra Schneider RH 3/800 Rotary table diameter: 1000 mm grinding height: 1000 mm workpiece height: 1000 mm grinding wheel diameter: 300 mm total power requirement: 30 kW Itsdpfx Ahsxx R Dbj Nob machine weight approx. 12 t

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Console version with height-adjustable head Iedpfx Aexx Ridjh Nstb . with - or - without ROMAI multi-spindle .

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Make: FORST Type: RISH 63X1000X320 Itsdpfx Ahov Htlus Neb Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg Ijdpfsxr Aw Tjx Ah Netb - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min Itsdexr Aw Hopfx Ah Neb - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 8,979 h, load capacity: 4,500 kg, lifting height: 9,300 mm, free lift: 2,800 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,250 mm, motor manufacturer: GM 3.0, fork length: 1,400 mm, overall weight: 6,900 kg, empty load weight: 4,500 kg, total height: 4,250 mm, maximum load weight: 4,500 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, Combilift is in very good condition We sell forklifts after a full service. Iedpfx Ahoxl Eh Is Njtb Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world.

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Iodpfx Aexvig Neh Netb Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Itedjxvc Igopfx Ah Nob

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Itjdou Ef Dqopfx Ah Nob Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° Iodpjxtdfbofx Ah Notb MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)