Used International 560 for sale (10,848)

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Lrjdpsw Rz Rqjfx Ad Nog Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Condition: used, tank capacity: 560 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanised); Handhole diameter approx. 210 mm (one container is missing the handhole cover; this container also has more severe dents (see photos)); ball valves are very stiff to operate (possibly defective) Internal diameter: 1,080 mm Overall width: 1,120 mm Overall height: 1,100 mm Overall length: 1,120 mm Location: Bremen Nameplate: Volume: 560 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Last application: Chemicals Lrjdpfxeyck Upe Ad Neg TANK Supporting structure: Frame EQUIPMENT Manway / Dome: in top head (DN 400), handhole Outlet: DN50 DIN 11851 Note: slight residues, signs of use

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Ledpfx Adeyck Dde Norg Max. permitted operating temperature: 242 °C Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Outlet: 160 mm Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: used, tank capacity: 12,280 l, GENERAL Design: rectangular Notes: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in leg length (to be considered during installation) Lodeycku Nspfx Ad Njrg Overall width: 1,500 mm Overall height: 2,970 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs Ledpfx Adoycku As Norg HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Total width: 1,280 mm Total height: 2,870 mm Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Product-contact material: V2A 1.4301 (AISI304) Ljdpfxsyckuvs Ad Nsrg Condition: used Last application: wine storage TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Overall width: 1,450 mm Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: legs Ledjyckuiepfx Ad Nsrg Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate Lredpfxjyckuce Ad Nsg EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Lrsdpfx Adoyckt Se Njg Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Lsdpfsyckt Eox Ad Njrg Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Ledoycktropfx Ad Norg Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Lsdpfx Aeycimkjd Nsrg

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° Lredpfxoyb S Rvs Ad Neg table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm Lrjdpjyaypksfx Ad Nog -Weight: 3600 kg

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: Ljdsyaxu Sspfx Ad Norg For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for highly precise leak detection using helium and is typically used in industry, manufacturing, quality assurance, laboratories as well as technical service. It is suitable for safe detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leak locations can be specifically pinpointed, while in vacuum mode, entire assemblies or systems can be tested. An integrated turbopump and forepump make the device a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production - Service and maintenance work on vacuum equipment Technical Data: Manufacturer: Pfeiffer Vacuum Model: HLT 560 Test gas: Helium Measuring principle: mass spectrometric helium leak detection Operating modes: vacuum operation / sniffer operation Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge port Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can gladly be answered for you by phone.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffer & vacuum modes with backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional helium leak detector, Pfeiffer Vacuum HLT 560. This device is designed for high-precision leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service applications. It is capable of reliably detecting even the smallest leaks. The HLT 560 uses mass spectrometry and can be operated in both vacuum and sniffer modes. With the sniffer probe, leak locations can be pinpointed, while in vacuum mode, entire assemblies or systems can be inspected. Integrated turbopump and backing pump make this unit a complete, mobile testing system. Application areas (examples): • Leak testing of components and assemblies • Testing of vacuum chambers, pipelines, valves, heat exchangers • Quality control in production • Service and maintenance of vacuum technology systems Technical Data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Integrated turbopump Backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Test gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum operation / sniffer operation Lrsdpfx Adjyaxr Do Neg Reference leak rate: (7.4 ±15%) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2007, operating hours: 32,000 h, machine/vehicle number: IntNr231374, STAR SA 16R CNC sliding head lathe, year of manufacture 2007 CNC control: FANUC 18i-T Ledpoyapqwsfx Ad Nerg Operating hours: 32,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change and error.

Condition: used, mileage: 96,000 km, power: 412 kW (560.16 HP), first registration: 02/2024, fuel type: diesel, overall weight: 26,500 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 4,000 mm, loading space length: 7,550 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Information in English: SCANIA G 560 NGS SLEEPER CAB THERMO KING INSULATED BOX NEW CONDITION Box: Cooling/Frozen, fully insulated Tail lift: Dautel DL 200S, 2,000 kg lifting capacity Refrigeration: Thermo King TX 1000 (diesel/electric), temperature range from -29 to +30 degrees Celsius Thermo King operating hours: 827 hours Ljdoyc Iz Tjpfx Ad Nerg First registration: 02? 2024 MOT (APK): 12? 2026 – new inspection VIN: YS2G6X20009340765 Mileage: 96,000 km Engine power: 412 kW (560 HP) Transmission: Automatic Internal dimensions (LxWxH): 755 x 246.5 x 265 cm External dimensions (LxWxH): 1030 x 250 x 400 cm Empty weight: 12,870 kg Payload: 13,630 kg Gross vehicle weight (GVW): 26,500 kg Color: White Suspension: Full air suspension, front and rear Emission standard: Euro 6 E Axle configuration: 6x2 Tyres axle 1: 385/55 R22.5 L 99% R 99% Bridgestone Tyres axle 2: 315/70 R22.5 L 99% R 99% Bridgestone Tyres axle 3: 385/55 R22.5 L 99% R 99% Bridgestone Wheels: Alcoa DuraBright alloy wheels Cab type: G, sleeper cab Extras: RETARDER, automatic transmission, full air suspension, third axle steered and liftable, 1 bed, 2x leather seats, double glazing, Thermo King TX 1000 refrigeration, 827 total running hours on the fridge, temperature control from -30 to +30 °C, 615-liter diesel tank, fully insulated box body built in 2024, movable thermal wall, aluminum floor, 2,000 kg Dautel tail lift, trailer coupling. The vehicle had prior accident damage: cabin has been replaced and completely rebuilt by Van der Heijden Truckstyling, fully repainted, new Alcoa DuraBright wheels, new Bridgestone tyres all around. The truck is technically and visually as good as new. BEAUTIFUL SPECIAL G 560 FRIGO TRUCK AS GOOD AS NEW AND IMMEDIATELY AVAILABLE Refrigeration unit brand: Thermo King Further details: * Payload: 13,630 kg * Brand | First axle: Bridgestone * Tyre size | First axle: 385/65 R22.5 * Tread depth inner left | First axle: 99% * Tread depth inner right | First axle: 99% * Max. axle load | First axle: 7,500 kg * Brand | Second axle: Bridgestone * Brand | Third axle: Bridgestone * Tyre size | Second axle: 315/70 R22.5 * Tyre size | Third axle: 385/55 R22.5 * Tread depth outer left | Second axle: 99% * Tread depth inner left | Second axle: 99% * Tread depth inner left | Third axle: 99% * Tread depth outer right | Second axle: 99% * Tread depth inner right | Second axle: 99% * Tread depth inner right | Third axle: 99% * Max. axle load | Second axle: 11,500 kg * Max. axle load | Third axle: 7,500 kg * Wheelbase: 610 cm * Tail lift | Manufacturer: DAUTEL * Tail lift | Lifting capacity: 2,000 kg * Position | First axle: Front * Manufacturer | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Alloy wheels | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Manufacturer | Second axle: Other * Manufacturer | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Second axle: Single reduction * Lift axle | Third axle: Yes * Twin tyres | Second axle: Yes * Driven | Second axle: Yes * Steering | Third axle: Yes * Differential lock | Second axle: Yes * Alloy wheels | Second axle: Yes * Alloy wheels | Third axle: Yes Further equipment:

Condition: used, mileage: 893,162 km, power: 412 kW (560.16 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 14,795 kg, maximum load weight: 11,205 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, next inspection (TÜV): 12/2024, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, number of seats: 2, loading space length: 6,600 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, crane, cruise control, differential lock, navigation system, parking heater, power assisted steering, seat heater, trailer coupling, * German vehicle * Condition, see photos * Documentation available * Over €27,500 invested in truck and crane in the last 3 years * All invoices, e.g. swivel cylinder crane available * Crane HIAB 185K * 15 m hook height * 2 hydraulic outriggers * 5+6 control circuit * Grapple control * Crane extension 11m=1.5t - 8.20m=2.1t - 5.40m=3.3t - 4.50t=4t * High seat steering * Trailer coupling GVW 44000 kg * 29000 kg possible without technical modification * Scania V8 engine 15607 ccm * Air-suspended luxury cab * Air conditioning * Auxiliary heating * Leaf/air suspension + raise/lower * Roof hatch * E-window * Electric mirrors * Stereo CD Ledpfxjvhqcyj Ad Nsrg * Bed * Refrigerator * Reversing camera * Telephone * CB radio * Comfort seat * Heated seats * Multifunction steering wheel * Alloy wheels * Storage compartment * Differential lock * Retarder * High bulkhead * Stone tongs * Working lights * ABS * Wheelbase 3600 mm + 1400 mm * Unladen weight 14,795 kg * Payload 11,205 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 2,500 kg load capacity Design and technology The forklift’s construction is made of high-strength materials, resistant to intensive use and outdoor conditions. The reinforced frame and high-rigidity mast ensure stability during lifting and transport operations. The Nissan K25 engine with an output of 50 HP is a well-established unit in the forklift industry, offering strong tractive force, durability, and excellent availability of spare parts. The Power Shift automatic transmission allows dynamic acceleration and smooth direction changes without loss of torque. In addition, the use of hydraulic brakes and support systems enhances operational safety and user comfort. Precision and operational efficiency The mast is equipped with a forward/backward tilt function (angle 6° / 12°), enabling safe and precise handling of loads in various working conditions. The side-shift function significantly reduces operating time by allowing fork position adjustments without repositioning the entire truck. Thanks to pneumatic tires with deep tread and high ground clearance, the forklift performs exceptionally well on uneven terrain, ramps, and loading yards. A travel speed of up to 19 km/h unloaded enables fast execution of handling and transport tasks over large areas. Standard equipment Nissan K25 internal combustion engine Power Shift automatic transmission Tilting mast Side-shift forks Complete work and warning lighting Reverse alarm, strobe light, turn signals 1,220 mm forks with manual spacing adjustment Lrsdpfsycv A Eox Ad Njg Choose a proven solution for internal logistics. Select the CORMak 2,500 kg forklift with the Nissan K25 engine and Power Shift transmission—contact our technical advisor or order directly online. Technical specifications Load capacity: 2,500 kg Maximum lift height: 3,000 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic (Power Shift) Travel speed (loaded / unloaded): 17 / 19 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,600 mm (L1) Distance from front axle to fork face: 469 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,160 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,024 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,000 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,070 mm (H4) Mast ground clearance: 110 mm (H5) Ground clearance: 110 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 3,680 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Electric forklift truck with a 2,500 kg load capacity and 4,500 mm lifting height Design and technology The forklift is equipped with a modern electric drive that ensures quiet and emission-free operation. The power system is based on a high-performance 48V 490Ah battery, providing up to 10 hours of continuous operation. Compared to lithium-ion batteries, this battery offers up to 40% greater safety—it is resistant to mechanical damage, overheating, and does not emit harmful gases. A stable structure, precise hydraulic system, and a mast made of high-grade steel allow safe handling of loads at full capacity and maximum lift height. The forklift features a soft start system, power steering, and automatic speed reduction while turning, improving machine control and enhancing operator safety. Precision and operational efficiency The side-shift function allows fork position correction without the need to reposition the entire truck. Forward and backward mast tilt enables precise load placement and stable transport. A travel speed of up to 14 km/h and an optimized turning radius of 2172 mm make the forklift highly effective in narrow warehouse aisles. Applications This model is ideal for use in: high-bay warehouses and distribution centers, production plants with high material throughput, industries requiring clean, emission-free operation (food, pharmaceutical, chemical), outdoor loading areas – thanks to pneumatic tires and high ground clearance. Standard equipment Integrated 48V 490Ah battery 70A battery charger Side shift system (lateral fork movement) Tilting mast Full LED work and warning lighting Pneumatic tires with deep tread Audible warning system, turn signals, warning beacon, reverse alarm Technical specifications Load capacity: 2,500 kg Maximum lift height: 4,500 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Battery voltage / rated capacity: 48V / 490Ah Continuous operating time on full charge: up to 10 h Charging time: 10 h Travel speed (loaded / unloaded): 12 / 14 km/h Tire type: Pneumatic Overall length: 3,573 mm (L) Overall length without forks: 2,353 mm (L’) Wheelbase: 1,480 mm (L1) Ledpfxoycvxye Ad Nsrg Distance from front axle to fork face: 468 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,170 mm (W1) Rear width: 950 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,038 mm (W5) Maximum lifting height: 4,500 mm (H) Overall mast height (lowered): 1,995 mm (H1) Overall mast height (raised): 5,750 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,098 mm (H4) Mast ground clearance: 110 mm (H5) Minimum ground clearance: 105 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Turning radius: 2,172 mm (r) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,015 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Lsdpfx Adjycvv Sj Norg Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: used, functionality: fully functional, Year of construction: 2019, power: 11.9 kW (16.18 HP), motor manufacturer: John Deere, gearing type: automatic, fuel type: gasoline, maximum speed: 45 km/h, color: green, machine/vehicle number: 2496428, Technical Data Lrodoycqg Eopfx Ad Njg Year of manufacture: 2019 Petrol engine 570 cc Seats: 2 Speed: 45 km/h Towing capacity: 499 kg Payload: 181 kg Engine power: 11.9 kW (four-wheel drive) Tank capacity: 18.5 l Payload cargo bed: 227 kg Cargo bed dimensions: 820 x 1209 x 297 mm Vehicle in good condition Fully functional Technically inspected General signs of use Delivery available on request Rental available on request Stock: 1 unit

Condition: like new (used), Year of construction: 2018, machine/vehicle number: IntNr231086, Int. No. 231086 1449 Oil/Emulsion Mist Extraction System AR FILTRATIONI S.R.L. Extraction Series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate: 2600 m³/h (1.5 kW) Voltage/frequency: 230/400 V, 50 Hz Noise level: approx. 70 dBA Stage 1 – Centrifugal condenser, self-cleaning Stage 2 – Metal mesh filter, washable Stage 3 – Pocket filter Stage 4 – Fine filter mat, washable Stage 5 – HEPA ultra-fine filter Overall unit filtration efficiency: up to 99.97% Lrjdpfox U Dhusx Ad Nog - Quick and easy maintenance, once per year, high operational reliability - Sturdy construction, minimal space required - Recovery of up to 80% of condensed coolant lubricant - Design and performance in compliance with current standards - Approx. €415.00 in energy savings per air purifier - Reduction of emissions by 9,000 kg CO2/year/unit - Protects sensitive machine tool components - Protects both the environment and personnel Dimensions: approx. 990 x 570 x 1400 mm Weight: approx. 120 kg Short delivery times available by arrangement. The machine can be inspected under power by appointment. Subject to technical modifications, errors, and interim sale!

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Ledpfjx Ux T Eox Ad Nsrg Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation