Used Intermediate for sale (781)

Condition: used, mileage: 15 km, power: 140 kW (190.35 HP), first registration: 06/2026, fuel type: diesel, overall weight: 4,100 kg, next inspection (TÜV): 06/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Airbag, passenger side, Acoustic package, Trailer socket, 13-pin, Armrest, driver and passenger side, Exterior mirrors, electrically foldable, Exterior mirrors without integrated turn signal, Battery disconnect switch, 1-pole, DAB tuner (digital radio reception), Door handle for entry on the rear pillar, right side, Parking brake, electric, Fire extinguisher, Vehicle without tachograph, Vehicle without speed limiter, Vehicle without load compartment partition, Generator 250 A, Cup holders, front, Grab handle, B-pillar, Rear lights, partially LED, Inductive charging tray for smartphone (wireless charging), Interior: Air vents, instrument panel, Folding cover for storage compartment, Folding cover for storage compartments, left/right, Connection strip for electrical connections (driver's seat), Instrument cluster with color display, Comfort climate control Thermotronik, Comfort lighting in passenger/cargo area, Fuel filter with water separator, Charging package, dashboard (USB connections and 12V socket additionally), Cable duct on rear portal, Cable duct on side wall, Marker lights, side, Multimedia system MBUX (10.25" touchscreen with navigation), Parking package with 360° camera, Smoker package, Spare wheel in driving condition, Spare wheel holder under frame end including jack, Interior mirror, Mud flaps, front, Seats in cab: Passenger seat, heated, Seats in cab: Passenger seat, comfort, Seats in cab: Passenger seat with lumbar support, Seats in cab: Driver's seat, heated, Seats in cab: Driver's seat, comfort, Seats in cab: Driver's seat with lumbar support, 230V socket in cab, Fuel tank sensor for auxiliary heater, USB connection in the center under the dashboard (charging function only), Jack, Auxiliary heater (air), electric, Sliding door assist, right side, Intermediate limiter, cargo area sliding door. Njdpfx Ajzig Ttshkowk Additional equipment: 3rd brake light, Storage compartment above the windshield, Storage compartment below the dashboard, passenger side, Towing eye, rear, Adaptive brake light, Airbag, driver side, Anti-slip control (ASR), Display for windshield washer fluid level, Exterior mirrors, electrically adjustable and heated, both, Outside temperature display, Turn signal lights, front, side, Automatic activation of headlights, Door handle for sliding door on load compartment partition, Electronic brake force distribution (EBV), Driver assistance system: active brake assist, Driver assistance system: breakdown management, Driver assistance system: crosswind assist, Grab handles, A-pillars, Rear door (opening angle 180 degrees), Body/structure: Standard van, Child safety lock, Communication module (LTE) for digital services, Fuel tank: main tank 93 L, Steering wheel (steering column mechanically adjustable), Headlight range adjustment, Mercedes-Benz emergency call system, Engine 2.0 L - 140 kW CDI CAT, Wheelbase 3665 mm, Low emissions according to emissions standard Euro VI, Sliding door, load/passenger compartment, right, Safety belt system with warning system (passenger side), Safety belt system with warning system (driver side), Seat cover/upholstery: fabric, Start/stop system, engine, Fleece battery 92 Ah, Maintenance interval display Assyst, Heat protection glazing (windshield with band filter at the top), Permissible total weight 4.10 t. High specification. Registered today. ==Daily purchase of commercial vehicles possible, as well as trade-in==Detailed view // Detailed Walkaround: ?v=q5VvSdlibtE.

Condition: used, mileage: 446,764 km, power: 294 kW (399.73 HP), first registration: 02/2019, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Accessories = - DVD player - Air conditioning - Wheelchair lift - USB connections Nwedpfoy Dvhxjx Ahksk - Webasto heater = Additional Information = Damage: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a wide range of buses of all brands, capacities, and models, in every price range, in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, intermediate sales, and typographical errors are subject to change. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: like new (used), mileage: 200 km, power: 103 kW (140.04 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, number of seats: 2, loading space length: 3,700 mm, loading space width: 2,200 mm, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), lane keeping assist, power assisted steering, tire pressure monitoring, Food truck base vehicle. (Further modifications possible!) Nwedszuzk Depfx Ahksk Insulated superstructure. Interior dimensions: 3700x2200x2300 mm (length x width x height). Serving hatch on the right and rear door in the superstructure. Plastic cast floor in the superstructure, molded in a tub shape. Hygiene area with a double sink, hot water boiler, and water supply via a canister system for fresh and wastewater. Countertop in the upper area of the serving area, covered with stainless steel. 230-volt power supply with a fuse box. Double sockets. Recessed spotlights in the upper shelf in the serving hatch. RGB LED light strips under the serving hatch and on the front of the serving area, below the counter. Stainless steel wall cladding in the rear area. Exhaust hood with motor and light. Dimensions: 3000 mm long and 900 mm deep. Gas cylinder compartment. Further modifications and conversions are possible as an option. Established vehicle construction company with over 40 years of experience in mobile vehicle construction for food trucks, service vehicles, etc. Visit our social media channels to see our portfolio and gain inspiration. Benefit from our financing and leasing offers for businesses. (Germany and Austria) Intermediate sale possible! Please inquire by telephone in advance for a detailed quote. Other vehicles with various equipment options available upon request.

Condition: excellent (used), Year of construction: 1987, machine/vehicle number: 15957, functionality: fully functional, input frequency: 50 Hz, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (min.): 4,750 rpm, total length: 6,300 mm, total width: 1,230 mm, total height: 2,860 mm, feed length X-axis: 6,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 60 mm, main saw diameter: 300 mm, space requirement height: 250 mm, space requirement length: 7,000 mm, space requirement width: 1,000 mm, max. cutting width: 5300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, lower support: lockable rollers, saw head tilting: manual, saw feed: automatic, extraction: external extraction, weight approx.: 1500 kg, motor power: 7.5 kW. Manual or automatic feed 11/17/22/33 m/min, Digitron, digital measuring system horizontal and vertical. Intermediate support throughout the entire frame length. Nwodpfx Aoxpqh Iohkjk

Condition: new, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, The MK Diana Smartpacker packs your folding cartons fully automatically into shipping cases in one to four rows downstream of the folder gluer's compression and delivery station. An operator can also feed new shipping cases at a central control station and put sheets into the empty shipping case or insert intermediate sheets. Thus, up to three additional layers can be added semi-automatically. Nsdpszbqwhsfx Ahkjwk The MK Diana Smartpacker can pack up to 130,000 cartons per hour in shipping cases. It is operated via a touchscreen display. The settings are calculated automatically after entering the production parameters. In addition to placing the folding cartons onto the closure flap in the shipping case, the right and left turning stations allow the cartons to be placed onto crease lines 2 or 4.

Condition: new, Year of construction: 2025, - Mechanical structure capable of cutting aluminum profiles at angles between 22.5° and90° with high speed and quality - Precise mechanical structure offering automatic positioning for 22.5°, 45°, and 90° angles,and manual positioning for intermediate angles - Stress-relieved cast and welded parts to ensure constant high-speed precision Nedpfx Ahozuv Ecokjwk - Profile fixing pistons - Right-hand profile support stand - Safety covers - Single-head operation - 7'' touch screen - Ethernet connection - Ø 550 mm saw - Coolant spray system - Hydropneumatically controlled, adjustable saw feed rate

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Nwodpfeyh A Iisx Ahkok Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Nodpfx Asxuad Ashkewk Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 650 mm, travel distance Z-axis: 800 mm, overall weight: 71,400 kg, spindle speed (max.): 105 rpm, spindle motor power: 100,000 W, number of axes: 2, Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details. - Max. Pipe Diameter to be Processed: 1,625 mm- Min. Pipe Diameter to be Processed: 406 mm- Max. Pipe Length to be Processed: 13,200 mm- Min. Pipe Length to be Processed: 6,000 mm- Min. Pipe Wall Thickness: 12 mm- Max. Pipe Wall Thickness (Copying Process): approx. 40 mm- Max. Pipe Wall Thickness (CNC Operation): 70 mm- Max. Pipe Weight to be Supported: 25500 kg- Height between Hall Floor and Pipe Inlet: 800 mm- Total Machine Length: approx. 24,000 mm- Total Machine Width: approx. 4,100 mm- Total Height from Floor to Top of Clamping Vise: 5,000 mm- Total Machine Weight: approx. 71400 kg- Operating Voltage: 400 V, 3-phase, 50 Hz- Control Voltage: 220 V DC / 50 Hz- Nominal Operating Current: 400 A- Intermediate Bed - Bed Length: approx. 3,950 mm- Intermediate Bed - Bed Width: approx. 1,800 mm- Intermediate Bed - Bed Height (incl. chassis): approx. 600 mm- Intermediate Bed - Travel Speed on Foundation Rails: 500 - 5,000 mm/min- Intermediate Bed - Drive Motor Power: 5.5 kW- Headstock - Faceplate Speed Range: 7 - 105 min⁻¹- Headstock - Motor Speeds: 300 - 4,500 min⁻¹- Headstock - Motor Power: 100 kW- Headstock - Motor Power (S1 Duty Cycle): 105 kW- Headstock - Max. Faceplate Torque (S1 Duty): 33,000 Nm- Headstock - Characteristic Speed: 27 min⁻¹- Headstock - Main Spindle Diameter (Front Bearings): 300 mm- Faceplate (X-Axis) - Faceplate Diameter: approx. 1,950 mm- Faceplate (X-Axis) - NC Tool Support Travel Range: approx. 650 mm- Faceplate (X-Axis) - Tool Support Feed Rate (Infinitely Variable): 0.5 - 1,500 mm/min- Faceplate (X-Axis) - Max. Achievable Feed Force: 25 kN- Feed Gearbox (Z-Axis) - Headstock Feed Travel on Machine Bed: 800 mm- Feed Gearbox (Z-Axis) - Feed Rate (Infinitely Variable via AC Servomotor): 0.5 - 200 mm/min- Feed Gearbox (Z-Axis) - Rapid Traverse Speed: 1,500 mm/min- Feed Gearbox (Z-Axis) - Feed Force: 30 kN- Feed Gearbox (Z-Axis) - Feed Motor Torque: 27 Nm- Pipe Clamping Steady Rests - Clamping Range: 406 - 1,625 mm- Pipe Clamping Steady Rests - Pipe Weight Capacity per Steady Rest: 150 kN- Pipe Clamping Steady Rests - Adjustable Clamping Force: 10 - 200 kN- Pipe Clamping Steady Rests - Max. Adjusting Speed of Centrally Moving Clamping Crossbars: 600 mm/min Nwedjzr Nmuepfx Ahkjk

Condition: as good as new (ex-display), Gravity roller conveyor for pallets and metal boxes (3-lane),4.26 m, Brand new condition (without warranty) Manufacturer / System: ELD Raktártechnika Type: Gravity roller conveyor / gravity lane 3 item in stock Transportable unit: Pallet, metal box, storage container, and other custom loads Length: 4264 mm (Sections: A2 L=1768 mm + C L=2496 mm) Installation width (EL): 850 mm Usable width (CW): 810 – 812 mm Overall width: 930 mm Roller pitch: 78 mm Conveyor slope: 4% Load capacity (per unit): Nwjdpezr Hv Tjfx Ahkek Minimum 120 kg when using brake rollers Maximum 720 kg (Max. weight ratio 1:4) Finish / Material: Galvanized and painted steel frame (Grey RAL 7005 / Yellow RAL 1021) Features: - Integrated brake rollers (with speed control against load acceleration) - 2 stop elements - Manually released intermediate stop (with yellow operating lever) - Entry guide plates (yellow) and side guide rollers - End stop Operating temperature: 0 – 45 °C (dry warehouse environment)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Nwodpszr E S Tofx Ahksk Oil-pneumatic blade feed Useful cutting length (mm) 4,000 Blade diameter (mm) 550 Blade motor power (kW) 2.2

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Nedpfx Aozun I Aohkewk Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually Nwjdpfjya Ahvex Ahksk - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: Nodozryx Uopfx Ahkswk - Table size: 2,800 x 950 - Motor: 5.5 kW - Belt width: 150 mm

Condition: used, JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Nwsdpfszryw Dex Ahkok Technical data: - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Nwsdpfx Aow Dfgwjhkjk

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Nwjdpfjx Dm D Iex Ahkjk

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Nedpoyvuuusfx Ahkjwk

Condition: ready for operation (used), Year of construction: 2017, A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible. Nwsdpfx Ahjy Hvqxekek

Year of construction: 2001, condition: ready for operation (used), A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible. Nsdpjzcp U Iefx Ahkjwk

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Nwsdpfx Ahoy Ax Thokek

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Nwedpfoy E S E Ajx Ahkok

Condition: ready for operation (used), Year of construction: 2006, A complete screen and gravure printing system for paper and non-woven wallpapers is available. Output: 15000 rolls/24h, substrates: paper: 80g-150g/m², non-woven: 50g-150g/m², printing width: 1060mm, working width: 1200mm, printing speed: 5m-150m/min. Components: Preconditioning, gravure printing unit, 5x screen printing units, 2x screen gravure printing units, 5x intermediate dryers (standard version), 2x intermediate dryers (1.5 times dryer height), 1x main channel with 6x 4m zones, roller/unwinder, register embossing, double-head printing units. Including various peripheral devices and units. Total dimensions X/Y/Z: approx. 60m/8m/6m. Documentation available. On-site inspection is possible. Nodpfxot Rkats Ahkowk

Condition: ready for operation (used), Year of construction: 1996, The gravure printing machine was used for wallpaper and other substrates. Number of printing units: 7, track width: 59mm, max. printing width: 53mm, max. roll diameter: 1000mm. King shaft drive / DW 1 + 7, single drive possible. Unwinding with lifting platform aid. Intermediate dryer operated with thermal oil. Paper and non-woven printing substrate, register control. Nsdpjr Equyefx Ahkjwk

Condition: used, Year of construction: 2008, 12 motors of 15kW Nodpfx Aswiwpzehkewk Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Control cabinet, Fire suppression system Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels