Regeneration Plant

Erema

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Ppedpfx Aeualalehvep Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents - Year of manufacture 2004 Subject to prior sale Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Year of construction: 2008, condition: excellent (used), machine/vehicle number: WK43/07, Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Pedpfxeikvlmj Ahvjpp Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Year of construction: 2022, condition: ready for operation (used), Recycling system with regranulation line, conveyor belt, roller infeed, granulate dosing unit, twin-screw stuffing unit and bagging station, 1) Regranulation line, components: Piovan feeding, backflush filter, extraction system, process-water tank, hot-die-face granulation, granulate dewatering screen, water pump station, granulate scale, granulate centrifugal dryer, granulate conveying system, filling station, swivel side wall for PCU hood. Throughput capacity MDPE, LDPE: 650-725kg/h, PCU drive: 132kW, weight: 12,680kg, extraction system air capacity: max. 3000m³/h, weight: 174kg, process-water tank filling volume: approx. 860l, backflush filter screen diameter: 215mm, number of screen packs: 4, hot-die-face granulation number of knives: 4, knife head speed: 1420/min, granulate dewatering screen dimensions: 1900x700mm, oversize separation: less than 20mm, trough volume: 470l, granulate centrifugal dryer drive power: 7.5kW, granulate conveying system air capacity: max. 1900m³/h, length (without BigBag station): approx. 11,642mm, width: approx. 8000mm, 2) Conveyor belt with hopper, level sensor and double-layer metal detector, weight: approx. 950kg, belt dimensions: 7000x1100mm, with cleats, metal detector coil aperture: 1300x400mm, detection: all metals, measuring accuracy: Fe= M6 nut, V2A= M10 nut, technology: digital, alarm: visual and acoustic, 3) Roller infeed, infeed cross-section: 450x150mm, drive power: 1x 1.5kW, max. infeed speed: 20m/min, 4) Granulate dosing unit, operating principle: gravimetric, bulk density: 0.6kg/dm³, dosing range: 4-40kg/h, 5) Twin-screw stuffing unit, bulk density: 0.6kg/dm³, throughput capacity: max. 100kg/h, screw diameter: 40mm, 6) Bagging station, frame: for 2 BigBags, diverter: pneumatic, with level sensor, operating hours reading: 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible. Pedpfx Asx Dm Dhohvjpp

Year of construction: 2017, condition: ready for operation (used), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible. Ppodswty Hkopfx Ahvop

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable Pjdpfsgp Dc Rsx Ahvopp - Can be operated electrically or manually - Pressure indicator - Emergency stop - 400V

Year of construction: 2019, condition: ready for operation (used), Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction. Pedpop Du Aaofx Ahvepp

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Ppedoumubyepfx Ahvjp Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: new, Year of construction: 2025, pressing force: 38 t, power: 5.5 kW (7.48 HP), New on stock Ppjdpfx Ahswhfu Aovep Avermann MPC 20 PEL Optional with Bin Lift

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding Ppjdpfsxwvqqjx Ahvsp • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Pjdpfewg R Rtex Ahvopp