Used Impregnating for sale (69)

Condition: new, 5000 kg length 6000 mm width 2450 mm height 527 mm lenkbar lenkbar size of tyres 406,4 x 127 mm Pjdpfx Ahevn Uw Io Hogg weight of the machine ca. 1,8 t dimensions of the machine ca. 7,2 x 2,45 x 0,527 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, 40000 kg length 9000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 x 300 2-fach mm dimensions 10,9 x 3,0 x 0,9 m Heavy load trailer with - double steering Pgjdpfxovn Uxxj Ah Hog - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 10000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,9 t dimensions of the machine ca. ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle Pgodjfrzvljpfx Ah Heg - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 40000 kg length 8000 mm width 3000 mm height 900 mm lenkbar lenkbar size of tyres 540 / 300 2-fach mm dimensions 9,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. Pjdjfrzwfopfx Ah Hegg

Condition: new, 20000 kg length 8000 mm width 3000 mm Pgodjirwwtjpfx Ah Heg height 820 mm star lenkbar size of tyres weight of the machine ca. 4,0 t dimensions of the machine ca. 8,25 x 3,0 x 0,82 mm Heavy duty trailer with - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height

Condition: new, 5000 kg length 5000 mm width 2000 mm height 500 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 1,0 t dimensions of the machine ca. 6,3 x 2,0 x 0,5 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance Podofrzu Sepfx Ah Hogg - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, 40000 kg length 9000 mm width 3000 mm Podpfxjfrzwie Ah Hegg height 850 mm lenkbar lenkbar size of tyres 540 x 300 8-fach mm dimensions 10,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 10000 kg length 6000 mm width 2450 mm height 587 mm lenkbar lenkbar size of tyres 406,4 x 254 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 7,2 x 2,5 x 0,6 mm Heavy load trailer with - double steering Pgsdpfxevn Uwbe Ah Hjg - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, 20000 kg length 6000 mm width 2450 mm height 697 mm Podpsvn Ux Eefx Ah Hjgg lenkbar lenkbar size of tyres 450 x 300 weight of the machine ca. 2,8 t dimensions of the machine ca. 7,2 x 2,5 x 0,7 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0400-01-0010000, type of input current: AC, overall weight: 2,750 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 1,953 mm, total width: 1,000 mm, total length: 1,600 mm, warranty duration: 72 months, nominal power (apparent): 1,000 kVA, nominal power: 1,000 kW (1,359.62 HP), secondary voltage: 400 V, protection type (IP code): IP00, temperature: 40 °C, empty load weight: 2,750 kg, space requirement width: 1,600 mm, space requirement length: 1,000 mm, space requirement height: 1,920 mm, ambient temperature (max.): 40 °C, roll spacing: 820 mm, Equipment: documentation/manual, type plate available, Three-phase cast-resin transformer Designed according to DIN EN 60076-11, VDE 0532, with separate winding Reduced no-load losses in accordance with Ecodesign Regulation EU No. 548/2014, Eco Directive 2009/125/EC Design features: - Flame-retardant and self-extinguishing - High-voltage winding vacuum-encapsulated, low-voltage winding vacuum-impregnated - Partial discharge-free (< 5 pC) - Taps can be changed in the de-energized state using switch lugs - Mobile design, 4 interchangeable transport rollers Pgjdsv U Ncrepfx Ah Hjg - Winding material: aluminum/aluminum - 4 lifting eyes, 4 draw eyes, 2 grounding screws - Documentation: Dimensional drawing, nameplate, data sheet, circuit diagram, operating instructions in German/English - Use of double-sided insulated, grain-oriented, low-loss electrical steel sheets - Reduced power losses A0 Level 2/Ak (Eco Directive 2009/125/EC) - Suitable for converter operation, THDu < 5% - 3x PT100 connected to terminals in the terminal box (IP 54) RATED POWER: 1000 kVA CIRCUIT: Dyn5 OVERVOLTAGE: 10 kV, with a value of ± 2x 2.5% FREQUENCY: 50 Hz UNDERVOLTAGE: 400 V + N SHORT-CIRCUIT VOLTAGE: 6% (tolerance ±10%) NO-LOAD CURRENT: 0.6% (tolerance +30%) INSULATION LEVEL HV (AC/LI): 12/28/75 kV – L2 INSULATION LEVEL LV (AC/LI):

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance Pgjdpfx Aew I Hqweh Hsg - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Psdpfxjrhidmo Ah Hogg Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Pressure vessel Diameter 1 .400 mm Length 4.100 mm Volume: 6.500 litres of preservative Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Pgjdpjtnmz Njfx Ah Heg Wood pack size: max 1 ,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float sy stem for the trolley s Storage tank placed next to the autoclave Volume: 10.000 litres of preservative Diameter: 1 .600 mm Length: 5.350 mm Material: 5 mm steel plate 1 .0037 acc. to EN10025

Condition: excellent (used), IwoTech Wood Treatment Autoclave, 161 m³, 12 bar For sale: fully operational wood impregnation autoclave manufactured by the renowned company IwoTech A/S. This large-capacity unit is ideally suited for professional treatment of significant volumes of timber, making it an attractive solution for sawmills, construction companies, and manufacturers of outdoor landscape elements. Key technical parameters: Manufacturer: The Danish Treting Co Ltd, IwoTech A/S, DK-7330 Brande Serial number: 10838 Year of manufacture: 1996 (reconstruction date: 26.08.1996) Volume: 161,000 liters (161 m³) Design pressure: Internal: 12 bar External: -1 bar (vacuum) Permissible operating pressure: -0.95 to 10 bar Design temperature: 50°C Dimensions: Internal diameter: 3,000 mm (3 m) Total length: 21,425 mm (21.425 m) Material: HSB 40 SS steel Weld factor: Z = 0.8 Pressure test (hydrostatic): 16 bar Hydrostatic test date: 26.08.1996 Application: Pressure-vacuum impregnation of wood. Podpfx Asw S Nz Toh Hegg Additional equipment: Feed valve: 1 pcs Discharge valve: 1 pcs Drain valve: 1 pcs Two impregnant storage tanks Temperature measuring device: 1 pcs Pressure measuring device: 1 pcs Condition: The autoclave is in good technical condition and ready for operation. Supplied with full documentation, including certificates and technical drawings confirming its parameters and compliance with standards (EN287-1). This is a reliable unit that will provide many more years of service. Set includes: - Complete autoclave - 2 impregnant storage tanks - Full technical documentation, drawings, and certificates (including hydrostatic test report). Please contact for more information or to arrange an inspection.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Stergaz autoclave Year of production: 2007 Technical condition: very good Autoclave + two tanks Technical data: - design pressure: 10 bar - design temperature: 40C - minimum / maximum temperature: 0/40 degrees Celsius - welded joint coefficient z = 0.7 - capacity: V= 84 800 L - material St 41K - casing thickness: 24mm - crown 26mm Pgodpjvu Ibyjfx Ah Hsg - bottom thickness: 26mm - vacuum: 90% - medium: water + impregnant

Condition: used, color: orange, empty load weight: 430 kg, machine/vehicle number: 3658, We offer here a salt spreader from Küpper Weisser (int. number 3658). Type IMSSE J18018H Serial number: 130266 Year of construction 2013 Unladen weight 430 kg Pgjdpfx Ahsiv U D He Hjg The salt container holds approx. 1.8 m³, the spreading width and quantity can be conveniently adjusted on the control panel during operation. The spreader was mounted on a UNIMOG and used by us, but was carefully impregnated in our workshop before the winter service season, so that hardly any corrosion has occurred. It only has one minor defect, as the attachment of the spreading plate is broken and needs to be welded, which can be done in our workshop on collection. Otherwise, the machine is in good condition and can be used at short notice.

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, Year of construction: 1995, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Pgedpfx Asi Rixgsh Hjg Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished

Condition: new, machine/vehicle number: G-CL-350-FR-EC, input voltage: 230 V, overall weight: 40 kg, total width: 340 mm, total length: 430 mm, total height: 600 mm, volume flow: 350 m³/h, noise level: 61 dB, ISI G-CLEANER Mechanical air filter device Type: 350 FR Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gaseous substances. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 350 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: top rear with 4 connections 50 mm Filter configuration: - Pre-filter mat F 5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of pressed, specially impregnated shaped carbon Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 61 db (A) Dimensions: length 430 mm / width 340 mm / height 600 mm Pgedsvrygpspfx Ah Hjg Weight: 40 kg

Condition: new, functionality: fully functional, machine/vehicle number: G-CL-270-FN-EC-EX, input voltage: 230 V, overall weight: 60 kg, total width: 500 mm, total length: 400 mm, total height: 755 mm, volume flow: 270 m³/h, noise level: 61 dB, ISI G-CLEANER - ATEX Mechanical air filter device (without intake plate / separate determination) Type: 270 FN Version: Mobile Control: without ATEX: "e" II 3 G Zone 2 Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas in the EX area. TECHNICAL DESCRIPTION: Air volume: - 320 m³/h (free blowing) - 240-270 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: exhaust air sound box at the rear (optionally 1x100mm / 2x80mm / 4x50mm) Filter configuration: - aluminum mesh coarse filter - Z-Line filter F9 - activated carbon cassette with pressed, specially impregnated shaped carbon ATEX: Group II Gas/dust Fan: according to ATEX II 2G Exh IIB T4 Gb Temperature class: T4 > 135°C Fan: device category 2 Filter system: device category 3 All electrical components are supplied in explosion-proof design. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Noise level: 61 db (A)) Psdpfjvrykhex Ah Hsgg Dimensions: length 400 mm / width 500 mm / height 755 mm Weight: 60 kg

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Pgsdpfxoxhc Tme Ah Hjg Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). Podpex Sdptefx Ah Hegg The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; Psdpfex Aktwsx Ah Hjgg - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; Pgsdpjx Akq Nsfx Ah Heg - Plant empty, loaded onto truck free of charge.

Condition: like new (used), Year of construction: 2019, Partial area dryers IWT, widely used in the automotive industry, Podpfxsxxa Nms Ah Hsgg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 250 h, functionality: fully functional, workpiece weight (max.): 100 kg, working width: 500 mm, transport length: 12,000 mm, feed rate X-axis: 90 m/min, feed length X-axis: 12,000 mm, working height: 300 mm, pass-through height: 300 mm, type of input current: three-phase, total length: 2,910 mm, total width: 1,300 mm, load capacity: 100 kg, overall weight: 1,000 kg, nominal power: 2.3 kW (3.13 HP), Schiele Impregmat EVO – Professional Impregnation and Coating Machine This robust industrial Schiele Impregmat EVO is a fully automatic coating and impregnation machine, designed for high-quality and loss-free impregnation, glazing, and coloring of planed and sawn wood materials.​ Technical Features: The machine is equipped with a patented double X-overlapping spray system, ensuring even application on all sides without material loss. With 8 or optionally 10 integrated brush stations, the EVO can safely and reliably process large cross-sections and solid workpieces. This makes it ideal for laminated beams, solid wooden beams, and board material.​ Working Range: Up to 500 x 300 mm maximum workpiece dimensions (optionally up to 500 x 500 mm available). Minimum workpiece length approximately 600 mm. The feed speed is variable, about 10-60 m/min., with a working height of approximately 900 mm.​ Materials and Durability: The entire frame is made of stainless steel (SS), aluminum, and plastic for contact surfaces, providing extreme wear and corrosion resistance. All drive elements are externally mounted and protected against corrosion. The brush movements are lateral and mounted on the top, preventing medium from entering the drive mechanism.​ Applications: Suitable for water-soluble impregnation and paint media, salts, oils, tints, and thin-layer varnish with a maximum viscosity of 25 seconds DIN 4 jar. Also suitable for solvent-containing materials.​ Efficiency: Special overflow nozzles ensure ideal saturation of all hard and soft wood areas. Filtered material is returned to the circuit, resulting in material savings and cost efficiency.​ Pgodpfx Ahoxvp Sxj Heg Advantages: This machine is known for its precision, consistent production quality, and reliability. Automated impregnation results in uniform finishing and minimal material waste. Suitable for professional woodworking companies, window frame manufacturers, and building material suppliers.​