Used Hydraulic Power Pack 200 Bar for sale (83,033)

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Djdpfjd Ira Dsx Ab Tjla -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Condition: good (used), Hydraulic power unit for Esterer LSH saw frame year 2006 Type: RP 63 WÜ feed for LSH also available fully functional - good condition - immediately available Location: Austria, near Ried im Innkreis Dlsdpsg R Sm Defx Ab Tsa Visit also my other advertisements. I am looking forward to your inquiry.

Condition: good (used), various hydraulic power packs available, more pictures to follow Dsdped Tx Ddofx Ab Tola

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: approx. 160 bar -Liter output: approx. L/min -Drive: 11 kW 1440 rpm Dlodpfx Aboflpuls Tsa -Dimensions: 710/280/H325 mm -Weight: 102 kg

Condition: used, Three-jaw chucks, three-jaw lathe chucks, power chucks Dlsdpfx Asd R Exajb Tsa -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Condition: used, functionality: fully functional, Year of construction: 2010, Equipment: pallet forks, Offered here are seven hydraulic power units from the manufacturers AC-Motoren GmbH and ADDA Antriebstechnik, built in 2010. The machines are in used condition and are currently not in operation. From a safety perspective, the machines meet the latest standards. All units are operational and ready for use. Jacket compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. +20 / max. +150 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Dedpfx Absxdi I Nj Tsla Volume (l): 4 Tube compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. 4 / max. 90 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 5 An inspection of the machines can be arranged upon request and by appointment. If you have further questions, please do not hesitate to contact us.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 Dedpfxjwuc Ero Ab Tela -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Dlodpfju D Tz Usx Ab Toa Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: excellent (used), color: red, Year of construction: 2012, Year of manufacture: 2012 Payload: 1,000,080 kg Extendable structure: Yes APK (Periodic Technical Inspection): Valid until 01/2026 Technical condition: Very good Visual condition: Very good GOLDHOFER THP/ MT/ ST 28 HYDRAULIC AXLE WITH 2X GOOSENECKS, 2X POWER PACKS, 2X DRAWBARS + FRONT SECTIONS THP / MT / ST MODULES: 2X 2-AXLE MODULES 2X 4-AXLE MODULES 2X 5-AXLE MODULES 1X 6-AXLE MODULE 2 HEAVY DUTY GOOSENECKS WITH HYDRAULIC POWER PACKS 2X DRAWBAR CONTROL SETS CENTRAL LUBRICATION SYSTEM BPW HYDRAULIC SUSPENSION AXLE 8 TIRES PER AXLE LINE TIRE REMAINING TREAD APPROX. 50% SIZE 215/75 R 17.5 YEAR OF MODULES: FROM 2009 TO 2012 COMPLETE AXLE SET WITH NEW GERMAN TÜV INSPECTION / APK / MOT PERMISSIBLE GROSS WEIGHT 1008 TONS AT LOW SPEED FOLLOW US ON INSTAGRAM: GEURTSTRUCKS Djdpjw D E Tdofx Ab Tjla WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, New: No Part suitable for: trucks Dedpfxewuy Abj Ab Tsla VAT/margin scheme: VAT deductible Type number: 2022876/2347769

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Serial number: 2010-11 /01 Dlsdpfxewp Rtgs Ab Toa Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm Dodpfjvhc Stox Ab Tjla MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: new, Year of construction: 2024, mast type: telescopic, lifting height: 2,000 mm, color: orange, General information Year of manufacture: Jan 2024 Technical information Drive: Wheel GVW: 275 kg Dimensions (LxBxH): 118 x 74 x 167 cm Functional Lifting capacity: 125 kg Working height: 400 cm Dlsdporaz N Dofx Ab Toa CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Ernst van Hek for more information

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars Dledsdqm Epepfx Ab Tja -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Condition: used, This listing is for a BioRad Model 200 / 2.0 Power Supply Djdoxzhkwjpfx Ab Tjla

Condition: good (used), Internal article no.: 24080 Dljdpfxsuxbwgo Ab Tea Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 2,500 mm, retraction force: 200 t, Equipment: safety light barrier, FOR 400/200 TON H TYPE HYDRAULIC PLASTERING PRESS TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING KESTLUB CAPACITY (RAM) 400 TON CAPACITY (POT) 200 TON MOVABLE TABLE DIMENSIONS 1200 x 1500 mm FIXED TABLE TABLE DIMENSIONS 1200 x 1500 mm LOWER EXTRACTOR TABLE DIMENSIONS 1050 x 1330 mm PARALLELITY TOLERANCE 120 micron/mt. HORIZONTAL TOLERANCE 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. INTERMEDIATE SPACE 200 mm MAX. INTERMEDIATE SPACE 1200 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) PROPORTIONAL SPEED and PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. By entering different speed, stop and pressure values at different points of the pressing process, the effect of material and mold deformations on the work done is minimized. MAX. WORKING PRESSURE 250 Bar – Adjustable from Proportional Screen TOTAL MOTOR POWER 37 kW– IE3 MAIN PUMP 140 cm³ – REXROTH – Piston Power Regulated MOVING TABLE FAST Descent Speed 50 ~ 400 mm/sec. – Adjustable from Proportional Screen MOVING TABLE PLASTERING Speed 5 ~ 21 mm/sec. – Adjustable from Proportional Screen MOVING TABLE RETURN SPEED 50 ~ 450 mm/sec. – Adjustable from Proportional Screen POT TABLE FAST Descent Speed 10 ~ 40 mm/sec. – Adjustable from Proportional Screen POT TABLE RETURN SPEED 10 ~ 70 mm/sec. – Adjustable from Proportional Screen MAIN CYLINDER INNER DIAMETER Ø 450 / Ø 390 mm – Ck45 Djdpfx Asv Dvv Reb Tola POT CYLINDER INNER DIAMETER Ø 320 / Ø 250 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS Ø 80 / Ø 50 mm – Ck45 APPROXIMATE HEIGHT OF PRESS 5600 mm APPROXIMATE WIDTH OF PRESS 3250 mm APPROXIMATE DEPTH OF PRESS 2200 mm LOWER TABLE HEIGHT FROM THE GROUND 1400 mm PRESS SIDE WINDOW DIMENSIONS 500 x 1300 mm PRE-FILL VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH COOLING SYSTEM SUCTION – CIESSE OFF-LINE FILTRATION REXROTH ENGINE CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH AIR FILTER REXROTH – 10 MICRON PERMEABILITY RETURN FILTER REXROTH – 25 MICRON PERMEABILITY OIL AND HEAT INDICATOR REXROTH VALVES USED REXROTH FILTER CONTAMINATION WARNING ELECTRONIC CONTROLLED LUBRICATING STYLE AUTOMATIC – (ADJUSTABLE FROM THE SCREEN) RAM STROKE ADJUSTABLE FROM THE SCREEN POT STROKE ADJUSTABLE FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. PARKER or ORDEL PLC APPLICATION DELTA TOUCH PANEL SCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER RADIATION BARRIERS KEYENCE, LEUZE, PILZ or SICK – 2 tk. APPROXIMATE WEIGHT 25 TONS

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Dlsdpfed Amwijx Ab Toa Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg good condition

Year of construction: 2022, condition: as good as new (ex-display), Pressure washer PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Feed rate: 13-42 l/min. - Engine: Kohler Stage V Diesel 35PS/26kW, 3400 1-min - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm Dlsdpfx Aofdzy Usb Tja - Electric starter - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 15200 kg Main Drive Pressing force 2000 kN General Data Machine weight 15200 kg Main Drive Pressing force 2000 kN Djdpfx Aex D Ruwsb Tsla This LAUFFER DK 200 was manufactured in 2007. A robust hydraulic stamping press with a pressing force of 2000 kN and a retraction force of 243 kN. It features a maximum stroke of 320 mm and operates at a work pressure of 249 bar. Weighing 15,200 kg, consider the opportunity to buy this LAUFFER DK 200 hydraulic stamping press. Contact us for further details regarding this machine. Application Types Stamping

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit Dsdpfxev Auxuj Ab Tela -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Year of construction: 2000, condition: good (used), 3-jaw wedge bar chuckFabr.SMW Typ:HG 200 bj.ca.2000Bore 50mmFlansch Aufnahme Diameter 170mmWithout jaws,with chuck key.chuck in good condition. Dlodod Sym Aopfx Ab Toa

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Dlsdpfx Aedf S Szob Tsa The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Dljdjx Aunfepfx Ab Tea

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, Injection Unit Screw diameter 35 mm Dodpfsx D Dkxsx Ab Tela Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding