Hydraulic power pack 11 kW 1430 rpm

ORSTA-Hydraulik A25 R TGL 10859

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 Njdpfxevrfivs Ahkeda - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 Nodpfx Ajwg E D Ijhksda - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2010, tank capacity 400 l working pressure 35 U,210 bar feed pressure / bar Nodpfxjm Sk Rgs Ahkoda weight 900 kg required space 1,72 x 1,00 x 1,81 m

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg Nedopz Sf Nopfx Ahksda

Year of construction: 2003, condition: used, tank capacity 160 l Nedpfx Aen Tvg Ejhkjda feed pressure 160 bar weight / kg

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) Ndodpfx Asziuazjhkja - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: good (used), Double hydraulic pump, oil pump, gear pump Ndedpfx Asdwlp Rohkoa -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

Condition: used, Year of construction: 2017, Overview  Ndsdpfjzaw Rlex Ahkea This labelling machine was manufactured in 2017 by NCM Maquinaria. The machine is designed for labelling applications in the wine industry. The machine is currently still installed and can be visited on request. Technical data  - Capacity: 1,500 – 2,000 bph - Application: Wine - Configuration: Model LV+5 - Type: Self-Adhesive - Compatible Bottle formats: 250 ml – 500 ml – 750 ml 1 L - 1.5 L - Nº of Heads: 4 - Label Types: Front, back, neck and fiscal stamp labels

Year of construction: 2006, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: FMB Blickle, hydraulic unit with hydraulic tank from rotary transfer machine Uldrian TSM 22-8 -Hydraulic pump: pressure up to 120 bar Njdpfxom Dyh Re Ahksda -Flow rate: 22 l/min -Motor: 4 kW / 1500 rpm -Hydraulic tank: with level indicator, tank capacity 100 l -Oil cooler -Individual components: see photos -Dimensions: 720/500/H1630 mm -Weight: 293 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, operating pressure: 160 bar, total length: 1,700 mm, total height: 1,140 mm, total width: 760 mm, tank capacity: 400 l, input voltage: 400 V, pump capacity: 90 l/min, rotational speed (max.): 1,450 rpm, power: 30 kW (40.79 HP), empty load weight: 800 kg, input frequency: 50 Hz, A very well-maintained hydraulic power unit. It was last used to supply several test benches with hydraulic pressure for various clamping devices. Also available is an additional, unused MOOG D954-0059 pump. !! The 2nd unused pump is NOT included in the listed sales price !! Power Unit Manufacturer: Wagener Hydraulik Year of manufacture: 1990 Pump Manufacturer: MOOG Model: D954-0059 /C' Year of manufacture (Pump): 02 . 2009 Nominal pressure: 280 bar Flow rate: 90 liters/min (63 cm³ / RPM) Filter unit: Hydac with pre-pump Level monitoring Accumulator: Hydac with digital pressure transmitter Ndjdjt Hwfhepfx Ahkja Year of manufacture: 2013 Capacity: 20 liters Electric motor: Siemens 1LA6 207-4AA70 200L Drive power: 30 kW Speed: 1465 rpm Voltage: 380 / 660 Volts