Used Hydraulic Power Pack 200 Bar for sale (85,857)

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Itedpfxjwva I Hs Afien Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: new, Technical data: Capacity: 200 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight, approx.: 2600 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: Ijdpopl T Diefx Afiotn - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Itsdedf S Szspfx Afisn Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2008, Emergency power generator, generator, or emergency power system Kirsch Type D 200 – 4 IWE according to DIN ISO 8528 for generating electricity by burning diesel in a closed, soundproof container. Construction year: 2008 Continuous power: 160 kW / 200 kVA Data sheet: On demand LBH: approx. 6 x 3 x 2.4 m engine: Iveco Type NEF 67 TE 2 A Ijdpfxjt Na Dfj Afijtn

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic power unit by REXROTH, consisting of: hydraulic tank 250 l, electric motor 15 kW, REXROTH internal gear pump, HYDAC pressure accumulator, SCHMÖLE heat exchanger, temperature monitoring, hydraulic filter, return filter. Isdpjxb Ebtjfx Afijtn

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 300 bar, unfortunately without type designation -Flow rate: 1.5 l/min Ijdoxbz T Sjpfx Afiotn -Motor: ZSE MEZ 0.75 kW / 220 V / 1400 rpm -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 370/220/H470 mm -Weight: 34 kg

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Itedpfxjv Ev Dqo Afion Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: new, Pleiger hydraulic motor MO 300/200 KM No. 6257639 Itjdpfxoxbb S Uo Afisn

Condition: used, mileage: 59,794 km, power: 74 kW (100.61 HP), first registration: 04/2009, overall weight: 5,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x4, maximum load weight: 2,570 kg, empty load weight: 2,430 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro4, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Only 59,794 km original mileage * Only 4,701 operating hours * Condition: see photos * All-wheel drive 4x4 * Switchable all-wheel steering * Municipal work platform with hydraulic and electric connections * From the German premium manufacturer LÄTZSCH, type MFK06 * Special high-pressure road cleaning unit * High-pressure system with 200 BAR working pressure * High-pressure hose with lance on rear reel * High-pressure spray bar, 1,900 mm wide * Ideal for sidewalk, bicycle path, street, and surface cleaning * Adjustable operating pressure from 20 to 200 bar * Flow rate: 29 l/min * Water tank: 1,800 liters Iodpfxoxc E Rks Afijtn * Warning beacons * Hydrostatic drive * 2 comfort seats * Work lights * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,430 kg * Payload: 2,570 kg If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. Please find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and review of the item to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and checks are possible at any time by prior arrangement and are explicitly welcome. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the item/vehicle. Subject to prior sale, alterations and errors.

Year of construction: 2024, condition: used, New: Yes Empty weight: 400 kg CE mark: yes Transport dimensions (LxWxH): 1,5x1,3x1,07 Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Iodpfxjvxdx Aj Afistn Rated Voltage: 400VAC; 3 phase 4 wire, 50Hz Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Max load power: 200 kW at 400V Power factor: 1 Cooling type: Forced Air Cooling Fan Control Power: External power 400VAC 3 phase 4 wire 50Hz

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - Strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support - Communication PC/CN TCP/IP - Cabin + roof - CE rules Itodpsk Uicgofx Afion - Year 2010 COMPLETELY RECONDITIONED

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FAG, hydraulic pump hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar Itsdehmgzwjpfx Afion -Number: 2x hand pump available -Price: per piece -Dimensions: 660/170/H200 mm -Weight: 6.8 kg/piece

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Isdpfexcbmhjx Afistn Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: new, Year of construction: 2025, functionality: fully functional, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure tank with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as a stabilizing element for compressor operation parameters. Key Features of the 200 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 200 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of ½", 1", and 2" allow flexible integration with various installations. Isdpfxsxbzd Rj Afistn High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Technical Specifications: Parameter Value Weight (kg) 80 Number of Connections 6 Connection Sizes ½", 1", 2" Dimensions 166.5 x 45 cm Tank Capacity (L) 200 Working Pressure (bar) 11 Wall Thickness (mm) 4 Diameter (mm) Ø 450 Height (mm) 1665

Condition: good (used), Year of construction: 1991, max. bar diameter: 42mm Chuck diameter: 40mm Itedpfx Ajvy Uy Hjfion Diameter over cross slide: 160mm Speed range: 10-5000 rpm Turret with 12 stations (not driven) 12 Chip conveyor Bar loader FMB turbo 3000 max. bar length: 3m

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg Iedpfx Ajt D Aptsfistn We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, Year of construction: 2025, Technical specifications: • Conforms to H-2 standard • Extraction capacity - ~ 6500 m3/h • Motor power - 5.5 kW • Speed - 3000 rpm • Voltage - 400V, 50Hz • Suction connection - 280/200 mm • Filter area - 22 m2 • Speed - 28m/sec. • Number of filters - 35 • Dimensions - 921 x 1982 x 2271 mm • Weight - 350 kg • Category of filters - G • Filter material - polyester • Noise - 80 dB without connection, 65 dB when connected to the machine via a pipe Iedpsd H Rfasfx Afiotn Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System) + 1000 euros for the models with inverter (speed control)

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: Yale, double-acting hydraulic cylinder stroke 250 mm -Type designation: H-20/250 -Piston rod: Ø 42 mm Iedskahk Iepfx Afietn -Lifting capacity: 20 t -Operating pressure: max. 700 bar -Dimensions: Ø 85 x 455 mm -Weight: 14.1 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, actuation type: hydraulic, controller model: Cybelec ModEva Pac, bending force (max.): 200 t, working width: 3,050 mm, stroke length: 274 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,050 mm Distance between uprights: 2,550 mm Ram stroke: 274 mm Itodpsw Rci Uefx Afien MACHINE DETAILS Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg EQUIPMENT 2 bending aids in front of the machine Fiessler light barrier in front of the machine Foot switch

Condition: reconditioned (used), Year of construction: 2016, M&J / Metso Powerpack Unit (Mint Condition) 2 × 200 kW HDC with P30 hydraulic pumps Installed in 20 ft container Complete with oil cooler Optional cutting table with 8 or 10 knives available as add-on. Ready for immediate delivery – excellent condition, barely used. Itsdpfx Asw Ud A Dsfion Perfect solution for high-performance shredding and heavy-duty applications. Contact us today for price and availability.

Condition: excellent (used), Year of construction: 2017, Motor from Lammers Antriebstechnik 11kW, 1470/min Valves: HYDAC Pump 30 cm³/rev Tank 250 liters Itjdpfxorm Nhle Afion Pressure 100 bar max Oil HLP 46

Condition: good (used), Pressing force 200 to table: 1500x1000 mm Itedpfx Aegvz Hxsfijn motor: 45 kW weight: 18000 kg Stand width:1500mm dimensions: Machine: 5500x2610x2150 mm

Condition: used, BOSCH REXROTH hydraulic power unit Itodpfxoh Ep Nde Afijn Year of manufacture: approx. 1970 Rated operating pressure: 50 bar Maximum operating pressure: 70 bar Flow rate: approx. 40 liters/min Tank capacity: 240 liters Motor power: 4 kW Power supply: 380 Volt, 50 Hz - 1x BOSCH electro-hydraulic valve Required space (L x W x H): 1020 mm x 610 mm x 1000 mm Net weight: approx. 170 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min -Individual components: see photos Iedpfx Afew S Hnqeistn -Dimensions: 760/435/H825 mm -Weight: 206 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: for hydraulic power chuck of CNC lathe Swedturn, type ST12 CNC 300 -Aggregate: AR-7587 -Hydraulic pump: Manufacturer Brown & Sharpe Type PVV-06-11A1 Double A -Engine: 1.5 kW / 1440 rpm -Pressure: up to 30 bar -Flow rate: 15 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 540/840/H865 mm -Weight: 215 kg Itjdpfxjw Nhhme Afion