Used Hurco Vmx 30 for sale (138)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,374 h, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine. Machine Benefits Godpfx Aox D Nz Nof Uebi Technical Machine Benefits • Max rapid traverse: 24003 mm/min • Max contour feed: 7620 mm/min • Tool positions: 24 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel Gbsdpfsx H A I Rox Af Usi • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm Gjdpjydqpijfx Af Uebi turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Gbodpfx Ajp I Hanjf Uji

Year of construction: 2002, condition: ready for operation (used), Machining center Hurco VM 1 spindle speed max. 8000 rpm traverse path: X: 660mm Y: 406mm Z: 508mm Gbedpfxji E Iacj Af Usi spindle 2000 hours complete software options DXF tapping without chuck all tools are included , Hilma Schraustock drawer shcrank with tools

Condition: like new (used), Year of construction: 2019, operating hours: 3,450 h, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 525 mm, turning diameter: 356 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, Machine in excellent condition. Year of manufacture: 2019. TM8i machine specifications Travels and working range: Distance between centers: 597 mm Swing over bed: 525 mm Swing over cross slide: 300 mm Maximum turning diameter: 356 mm Maximum turning length: 525 mm Maximum bar diameter: 64 mm X/Z axis travel: 203 / 550 mm Spindle: Maximum spindle speed: 4,000 rpm Maximum torque (high gear): 133.83 ft·lbs at 1,000 rpm (100.7 Nm at 1,000 rpm) Spindle power: 25.48 hp (19 kW) Spindle nose: A2-6 Chuck diameter: 210 mm Turret: Tool type: slotted disk Capacity: 12 stations Indexing time (adjacent stations): 1.3 s Indexing time (furthest stations): 3.6 s Feeds: Rapid traverse X/Z axes: 30 m/min Dimensions: Maximum installation area: 4336 × 3114 mm Machine height: 2193 mm Machine weight: 4,030 kg Workpiece gripper dimensions: 150 × 95 × 70 mm Gbodpfx Asyfhynjf Usi

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Hurco VM1 CNC milling machine, Vertical centre Good condition. Can be tested at work in our workshop. YEAR OF MANUFACTURE: 2003 Control: Hurco Max Control Spindle taper: CAT 40 Positions on tool changer: 16 X-axis travel: 660 mm Y-axis stroke: 356 mm Z-axis stroke: 457 mm Table dimensions: 762 mm x 356 mm Gbedpoyq Huhefx Af Uei Maximum weight on table: 340kg Spindle speed: 8000 rpm Electrical connection: 400V Dimensions: Length: 2100mm Width: 1850mm Height: 2400mm Weight: 3500kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Gsdpfx Aferxfxho Uobi Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Gbjdpfx Asw Nklhef Usi Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2007, No longer required in production. Parts are no longer required. Gjdpfx Aoumt D Hjf Usbi

Condition: excellent (used), Year of construction: 2017, operating hours: 8,440 h, functionality: fully functional, turning diameter over cross slide: 402 mm, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 19 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,170 mm, total length: 3,179 mm, total width: 5,310 mm, type of input current: three-phase, overall weight: 5,000 kg, operating hours of spindle: 1,038 h, We are offering a lightly used HURCO TMM 10i for sale. Main spindle operating hours: 1,038h The machine can be inspected at any time, as it is currently still in operation. Additional display included Integrated oil mist extraction system Includes a comprehensive range of accessories worth approx. €25,000 (net), including tools, tool holders, fixtures, storage cabinet, workshop trolley, and chip cart. An itemized list is available. There is the possibility for the buyer to manufacture and supply parts for the seller in the future. The corresponding programs for the machine are available. Gbodsyi Uf Espfx Af Uji

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, 3 axis CNC Machining Centre HURCO type VM10-24i PLUS CTS Year of construction: July 2024 - AS NEW - less than 100 working hours Travel X: 660 mm Travel Y: 406 mm Travel Z: 508 mm Numerical Command WinMax 5: double touch screen 19'' / Detachable electronic crank / USB ports Spindle: SA40, cooling by thermal fluid Spindle speed: 12 000 RPM Gbedeyh Nz Aspfx Af Uji Integrated tool coolant (CTS) Table size: 762 x 406 mm - 3 T-slots 18H7 - Loading capacity: 1500 kg Tool changer: 24 positions, automatic electric arm changer Spindle motor: 11,2 kW at 1450 RPM Max couple: 73,6 Nm Rapid advances: 28 m/min. on X, Y and Z Standard Functions: Ultimotion / rigid threading / helical interpolation / trochoidal machining / import STL /WinMax programmation Fanuc ISO + conversational Installed software options: Ultimonitor ESF (supervison Ethernet) Materials and tools Bookcase Files player DXF 2D/3D, SPLINE and STEP

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Gbjdpfspiay Ssx Af Uji Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: good (used), Year of construction: 2010, functionality: fully functional, X 3,200mm, Y 2,100mm, Z 920mm, ATC 40 pos, BT50 10,000Rpm. weight ca 35.000kg, delivery April 2026 Gbedpfx Afoyglbxe Usi

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos Gbsdpox Th Amsfx Af Usi rapid power traverse in X-and Z direction: 19 / 24 m/min Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included Gjdpfoxwyzysx Af Uobi OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Gjdpfx Ajx Akm Rjf Uebi Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Gbodoyap Tfopfx Af Uoi Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: used, Year of construction: 2006, Offer, subject to change: 1 used vertical machining center Gjdowl H Rmepfx Af Uebi Manufacturer: Hurco, Type VM1, Serial number H-V12319, Year of manufacture: 2000 Control: ULTIMAX 4 Table dimensions: 762 x 356 mm X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20-station SK40 tool holder Rapid traverse rates X/Y/Z: 28 m/min Drive power: 11 kW Space requirement: L x W x H: 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Condition: good (used), Year of construction: 2004, operating hours: 21,000 h, Hurco 3 axis vertical machining center in good condition with ca 21000 operating hours. Ready for immediate delivery (dismantled and transport ready). Gbedpfxex Uqm Dj Af Usi Cnc control Hurco Ultimax X-axis 600 mm Y-axis 355 mm Z-axis 455mm Motor 7.4 KVA Frequency 50 Hz Full load 13 KVA AC volts 3 phase 400 Capacity Tool Magazine 16 positions Type of tool holder SK40 Max spindle speed: 8000 rpm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Gbedpfx Afsx H Srlj Uoi Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, machine/vehicle number: SC54G2E20145DMFCS, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 920 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, controller manufacturer: WinMax, workpiece weight (max.): 11,000 kg, spindle speed (max.): 6,000 rpm, HURCO 3-Axis Double Column CNC Vertical Milling Center DCX 32i (SK 50) _____ Technical specifications: • X-axis travel – 3,200 mm • Y-axis travel – 2,100 mm • Z-axis travel – 920 mm • Work surface: 3,000x1,700 mm • Maximum table load: 11,000 kg • Main spindle speed: 6,000 rpm • Main spindle holder: SK 50 • Main spindle torque: 570 Nm Gbedpsx Shg Nsfx Af Usi Base configuration: • Main spindle cooling system; • Wired remote control; • Centralized automatic lubrication system; • ATC tool magazine with arm; • Chip conveyor with scraper; • Chip conveyor with rake; • Machine interior washing system; • Coolant/compressed air gun; • LED-illuminated work area; • Heat exchanger in electrical cabinet; _____ Included options: • Ulti-Motion - functions for reducing machining time. Cutting speed increases by 2.5 in curve/edge areas. Unlimited lookahead lines, automatic vibration reduction from cutting conditions, improved surface quality. • Solid - Import. Option to import Step files, create contours from 3D model, automatic detection of pockets and islands, manual part origin displacement • Simultaneous 4/5-axis machining in NC mode. Requires post-processed programs in CAM application. • Through-spindle coolant CTS20 (20 bar) • Workpiece measurement with probe, radio connection (Renishaw RMP 60-Q) Installation | Training | Does not include transportation

Condition: ready for operation (used), Hurco Process Board 415-0194-001A with Hurco Dual RS232 Board, used, 100% functional Gsdoi Ea R Iopfx Af Ujbi

Condition: used, Price: On request Gbjdpfx Aewnhrwsf Uji CNC Digital type: UNIMAX Number of axes: 3 Travel x: 1020mm Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - Table length [mm]: 1220 - Table width [mm]: 510 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 8000 - Options: Digital readout - └ Type of digital readout: UNIMAX Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Godpfxjwzy N Ie Af Usbi Tool magazine for 24 tools, SK 40 DCF software