Used Htc Twister System for sale (38,678)

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Container loading system (Fullfiller), the fast and uniform loading of granulated products and pellets into ISO containers. Standard capacity: up to 240 m³/h. Main motor power: 11 kW. Includes feed hopper, throwing unit, auxiliary ventilation system, electrical panels, controls, platform, guardrails and access ladder. Serial No.: 488981. Iiodpfxozvcyvj Abnof

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Iiedpfjzvddcox Abnof

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,860 mm, loading space width: 2,550 mm, loading space height: 4,000 mm, loading space volume: 91 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,970 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = 2008 SYSTEM TRAILER curtain-sided semi-trailer with ABS/EBS, BPW Eco-Plus axles with disc brakes, hardwood floor, 3 supports per side with curtain holders, sliding roof, rear doors, tires 385/65-R22.5 (tread depth left: 4/8/9 mm; tread depth right: 8/7/7 mm), unladen weight: 6,700 kg, permissible total weight: 39,000 kg, Dutch registration with valid technical inspection (APK) until: 04.10.2026 = Additional Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread depth left: 25%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread depth left: 50%; Tire tread depth right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 55%; Tire tread depth right: 45% Weights Unladen weight: 6,700 kg Iiedpfx Abjzc Nqvsnef Payload: 32,300 kg GVW: 39,000 kg Functional Body brand: SYSTEM TRAILER PRS 27 Maintenance, history and condition APK (Technical Inspection): valid until 10.2026 Technical condition: very good Optical condition: average Identification License plate: OK-93-NF Further information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Güntner Axial Cooler Fan diameter: 900 mm Number of fans: 3 Very quiet design Iodpfezl T Rqsx Abnoif Extremely quiet design Voltage / Phase / Frequency: 400 V 3~ 50 Hz ∆ Year of manufacture: 2010 Operating pressure PS: max. 32 bar / min. -1 bar Temperature TS: max. 100 °C / min. -50 °C Test pressure PT: 35.2 bar Test medium: Compressed air Volume: 87.0 liters Fan type: VT01185 CE marking present For general guidance: With an actual cooling capacity of 100 kW, a normally air-conditioned, well-insulated hall could roughly cover an area of about 1,000-2,000 m2. For cold rooms at 0 to +5 °C or freezer rooms at about -18 °C, the possible area is significantly smaller.

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018, Empty weight: 6.939 kg Iisdev Ica Depfx Abnjf The 2018 System Trailer 3 Axle SAF Disc Curtainsider features a galvanized chassis and anti-theft tilt, priced at €11,950 without VAT. It showcases good tire conditions across all axles, enhancing its appeal for heavy-duty transportation needs. The trailer is designed for optimal security and durability, making it a reliable choice for logistics operations. Tire profile dept: Axle 1: left 13 mm right 5 mm Axle 2: left 7 mm right 6 mm Axle 3: left 7 mm right 6 mm

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Isdpfx Abszvd Unsnjif Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: excellent (used), Year of construction: 2025, Hot fill bottling line - previously used on 500ml microwaveable bottles of soup. Consists of stainless steel bottle unscrambler with hopper and inclined conveyor, 90 degree infeed conveyor, 16 head in-line filler, 3 head inline capper, stainless steel cap unscrambler with hopper and elevated conveyor. Installed new late 2025 and only available label due to the Bankruptcy of contract packer. Isdpfx Abjztqfnjneif

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION - Condition: Used. Functional scope as per the technical data below. - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). Iijdjydq Hnspfx Abnsf - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2011, Duplo 5000pro Booklet maker. Year 2011 Count 3436444 1 pervious owner, who brought new direct from Duplo. Has been on a maintenance contract. I have a video in production. Machine ready to go in my warehouse, I can put on pallets for transport if needed. Machine sold ex works. Isdpfxozq S N Ao Abnjif The Duplo System 5000 Pro is an automated high-speed collating and bookletmaking system. Key specifications include maximum collating speeds up to 9,800–10,000 sets per hour, bookletmaking speeds up to 5,000–5,200 sets per hour, and support for up to 60 collating bins using DC-10/60 Pro suction towers Collator Specifications (DC-10/60 Pro Towers)Number of Bins: 10 bins per tower (connects up to 6 towers for a total of 60 bins).Feeding System: Advanced air-management suction sheet feeding with adjustable airflow on each shelf.Paper Size: Min: 120 x 148 mm, Max: 350 x 500 mm.Paper Weight Range: Supports 50 gsm to 300 gsm stock.Collating Speed: Up to 9,800 – 10,000 sheets/sets per hour.Bin Capacity: 65 mm shelf/bin capacity. 5000pro Booklet Maker Maximum Sheet Size: 350 mm x 500 mm (Up to 356 mm x 508 mm with certain configurations).Minimum Sheet Size: 120 mm x 170 mm.Maximum Booklet Capacity: Up to 25 sheets of 80 gsm paper (creates a 100-page booklet).Maximum Stitching Thickness: 5 mm (approx. 50 sheets of padded stock)

Year of construction: 2008, condition: used, functionality: fully functional, MSP 4550 NGI Sample Recovery System Iiodpfx Asznwrdjbnjf Available and ready for immediate dispatch.

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container – Swivel arm extension 800 mm – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position Iijdpfx Aszq S Ifsbnsf – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Condition: good (used), Year of construction: 2005, functionality: limited functionality, The FICO MMS-12-M is a Manual Molding System for the encapsulation (transfer molding) of semiconductors. It is a mechanically operated machine, primarily used for small series, development, and pilot production. Key specifications: Characteristic | Specification Type | Manual Molding System (MMS) Manufacturer | FICO (now part of Besi) Machine design | Mechanical Loading | Manual placement of lead frames Number of molds | 1 Capacity | 2 lead frames per cycle (12-position configuration) Application | Transfer molding of ICs, transistors, and other semiconductor packages Production | Development, prototypes, and small production runs Ijdpozk Ak Refx Abnsif Meaning of "12-M" According to FICO documentation: MMS = Manual Molding System 12 = machine with one mold suitable for two lead frames. M = mechanical design. Typical features: Manual input of lead frames. Heated transfer mold. Hydraulic or mechanical press for the transfer process (depending on the design). Temperature and process time control. Suitable for epoxy molding compounds (EMC). Developed for laboratories, R&D, and small production quantities.

Condition: like new (used), functionality: fully functional, Exhibition machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Ijdpszrnqlefx Abneif Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system Ijdpfxszukp Ae Abnsif -Manufacturer: TEKA, filter system for extraction system -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Note: A filter unit only, without a suction fan, can be supplied for an additional charge. -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: excellent (used), functionality: fully functional, DESTACO pneumatic clamp Recommended for welding jigs and series production. DESTACO 82M-3E series with integrated 8EA-146-4 position sensor module (open/power/close feedback, 10–30VDC, 150mA). Iijdezt Dm Eepfx Abnsf DESTACO 82M-3E030063L8 – stronger, 63mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G 1/4 Quantity: 28 pcs. DESTACO 82M-3E030050L8 – 50mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G ¼ Quantity: 8 pcs.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Iedpfszr Ircex Abnsif Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems Iisdpowm Nq Eofx Abnof • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, For sale: MAHLO Qualiscan QMS / WebPro M industrial measuring and quality control system, manufactured in 2020. The system is designed for continuous measurement and quality monitoring of web materials in industrial production processes. Iedpfx Ajzuc Uwebnoif Technical data: Manufacturer: MAHLO GmbH + Co. KG Type / Model: QMS WebPro M Year of manufacture: 07/2020 Serial / factory no.: 01010134 / 013673 Power supply: 230 V, 1L/N/PE Frequency: 50/60 Hz Protection class: IP43 Made in Germany Equipment included / visible MAHLO WebPro M measuring frame Traversing measuring system Measuring heads / sensors TEXTEST FX 3500-X20 sensor Electrical control cabinet Large HMI operator panel Control system Pneumatic components Cabling and installation components The system comes from a professional industrial production facility. The machine is offered as a complete system as shown in the photos. Condition: Used (for very short time, hence like brand new), visually in very good condition. Additional photos and technical information are available upon request. Please contact us for further information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2026, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 8,790 mm, color: other, Year of construction: 2026, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 30950 kg, Tare weight: 8050 kg, Gross weight: 39000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2026, Axle type: SAF, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 240x170, Battery for ramp, TAILLIFT 2,000 KG 3x 9 TON SAF AXLES DISC BRAKES = Additional Information = General Information Cab: Day cab Registration number: OX-74-GS Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 3: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Weights Tare weight: 8,050 kg Payload: 30,950 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-run, 2000 kg Environmental Emission class: Euro 0 Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages Iedszk Un Uepfx Abnjif • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Iodpfxsy Hlvwj Abnjif Condition – Fully operational.

Condition: good (used), Year of construction: 1987, pressing force: 1,250 t, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Iedpfszvb I Sex Abnjif Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Ijdpfxezuypls Abnoif Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Catalog number: 8077 TECHNICAL DATA - Engine: 4kW - Voltage: 400V - Number of waste containers: one double container, 2x200l - Extraction capacity: approximately 4000 m3/h - Filter area: 20m2 Iodpfxezuk Tbs Abnjif - Negative pressure: 2350Pa - Extraction speed: 20m/s - Filter type: M - Extraction nozzle diameter: 195mm - Overall dimensions (L/W/H): 1700x900x2000mm - Weight: 300kg ADVANTAGES - Mobile sawdust container - Unpainted - Used extraction unit - DTR documentation - Very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Iijdpfszp Iqmex Abnef Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: used, 1 unit of a DAF XF truck with a roll-off tipper / hooklift system for GERGEN JUNG GRK 21/70 Apollo containers Vehicle type: Truck Body type: Truck for ATL with roll-off system Manufacturer: DAF Truck Type: AT First registration: 06/02/2010 Mileage: 389497 Fuel: Diesel Rated power: 375 kW / HP: 510 Engine displacement: 12902 Official license plate: FN AO 9000 TÜV (technical inspection): 12/25 Number of vehicle keys available: 1 General condition: as per images and inspection Iisdezvdhbjpfx Abnof Equipment: as per images and inspection Available vehicle documents: Registration certificate I: yes Registration certificate II: yes Color: as shown in the images, as per images and inspection Vehicle ID XLRAT48MS0E873575 Condition: used Location of the goods: storage area near the turning plate Payment method: prepayment by bank transfer Shipping: Self-collection only from the Tettnang location Sales option: The vehicle is sold as is, without inspection, and in a de-registered condition. As there is no insurance coverage, the vehicle must be transported with a different axle or with red license plates.