Used Hss for sale (280)

Condition: used, Year of construction: 2003, cutting diameter 325 mm saw band length 4200 mm cutting width 500 mm Kjdpfxjyv Ny Se Aftelw 15 - 150 m/min. work height max. 750 mm

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: Klodpfx Asy Auhzsftjw * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, Year of construction: 2026, Z-MaT U320 5-Axis Simultaneous Machining Center Control: ZMATROL 5-Axis Simultaneous, 15" LCD screen (optionally Siemens ONE, 15" LCD screen) (Siemens/Fanuc 4+1) Travel (X/Y/Z): 500/500/400 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 24,000 rpm, built-in Spindle taper: BT30 Spindle motor: 3.7/5.5 kW Air blast through spindle Spindle air curtain Spindle oil cooler Tool changer: 21-tool disc Max. tool length: 200 mm Max. tool diameter: 60/100 mm Table Table diameter: Ø 320 mm Max. workpiece diameter: 320 mm Max. table load: 80 kg T-slot (width x quantity x spacing): 14H8 x 8 x 45° Distance spindle center to table surface: 100–500 mm A-axis tilting travel: ±115° C-axis rotation: 360° Max. rapid traverse A/C-axes: 100/130 rpm A/C-axis encoders Standard accessories Work completion lamp, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic grease lubrication system 3-axis glass scales with air purge (XYZ) Automatic tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip wash) Full enclosure Transformer: 400V, 50Hz Electrical cabinet heat exchanger Automatic power-off Leveling bolts and blocks Toolbox CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 1800 x 3270 x 2510 mm Machine weight: approx. 4,300 kg Subject to errors and prior sale Kodpfxjyv A Tro Aftelw Extensive automation options available

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan Kledjtwlwzjpfx Aftsw To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), mileage: 132,801 km, first registration: 04/2007, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Low noise - Air suspension - Air horn - Reversing camera - Sleeper cab - Sun visor flap - Stability control - Toolbox = Further information = Front axle: Steered Rear axle: Twin tires Number of cylinders: 6 Engine displacement: 6,871 cc Unladen weight: 9,890 kg Technical condition: very good Visual condition: very good Price: On request MAN TGS 18.240 4X2 + FAUN VIAJET 6R/HS SWEEPER/ROAD CLEANER Kedpfeuxv Slsx Aftolw EURO 4 L PACKAGE 240 HP DRIVE 4X2 WHEELBASE 360 CM AIR SUSPENSION TGM SLEEPER CAB WITH AIR CONDITIONING & CAMERA MANUAL TRANSMISSION FAUN VIAJET 6R/HS SWEEPER CAPACITY 6 M3 WATER TANK 1200 LITERS HIGH-PRESSURE WATER PUMP WITH SPRAY BAR AT THE FRONT OF THE VEHICLE 1X SIDE BRUSH CENTRAL BRUSH ROLLER ROLLER BRUSHES ROAD CLEANER EXTRA HIGH-PRESSURE REEL WITH SPRAY LANCE JOYSTICK CONTROL MW32 PUMP 135 L/MIN 300 BAR -1 1500 77 KW 6,993 HOURS PRICE 22,500 EURO NET EX FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,530 mm, Year of construction: 2025, Equipment: ABS, 2-Axle Self-Steering Trailer, Type M2K-9L * COMPACT steering system * Corrosion resistance through powder coating * All components are bolted on * Conventional wiring * Brackets and components in stainless steel or galvanized * 2 individual axles, manufacturer BPW, 10 t with disc brakes, including safety cables * Air suspension * Air reservoir made of aluminum * Bogie model IX, with 1x mechanically telescoping beams * Tires 275/70 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Manual central lubrication * Paint: RAL 9011 Graphite Black * Payload approx. 14,550 kg 2-Axle Self-Steering Trailer, Type M2K-10B * Differences from M2K-9L: * Leaf spring suspension Ksdpjgqc Hbofx Aftelw * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer, Type M2K-10L * Differences from M2K-9L: * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer, Type M2R-10L Differences from M2K-9L: * ratio steering system (4-cylinder) * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various optional equipment available. Further information on request. Illustrations may differ from the original. Specifications are subject to change without notice. Contact: Niclas Lott Tel.:

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor Kljdpfxow U H Sbo Aftsw * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-260017, The FICEP Tipo G31 sheet metal processing center for the cost-effective processing of steel sheets and flat steel in the steel construction and steel trading industries. The Ficep Tipo G31 LG can drill, center-punch, tap, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting. The CNC-controlled sheet metal processing center is equipped with 2 drilling units, each with 26 kW of drive power. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. This system is suitable for sheet metal sizes: sheet width: minimum 200 mm, maximum 3,100 mm; sheet length: minimum 2,500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma power source is available for plasma cutting. In addition, the system features an oxy-fuel cutting unit for thick materials. Kedpoznh R Refx Aftjlw The drilling unit, with high torque and a spindle speed of up to 6,000 rpm, is designed for drilling with carbide tools such as solid carbide drills, Kennametal drilling tools, Nenok Multiplex indexable insert tools, as well as for use with HSS coolant-channel drills with diameters ranging from 10 mm to 40 mm. The Ficep Tipo G31 sheet metal processing center is in very good condition and has only a few operating hours.

Condition: excellent (used), Year of construction: 2006, Ref:11129 . 2006 Perfecta Seypa 92-TVC Guillotine Comprising; Central air table with blower Steel side air tables to left & right Electronically controlled 2 speed back gauge Colour display with soft key pad 8000 cut positions with 400 programmes Minimum programme step 1 mm Illuminated cutting area Infra-red light beam guard with FFM Knife change device Kjdpfx Afjzmydyjtolw 2 HSS knives Including tools & manuals. Specification: Cutting width, Max: 92 cm Feed table depth, Max: 92 cm Clamp opening, Max: 13.5 cm Number of cuts : 44/min. (cont. operation).

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, HSS discs, Ø 350 mm – thickness 2.5 mm – number of teeth 280 – tooth pitch 4 mm. Three-phase motors with 2 speeds, 2.2/1.4 kW – 1440/720 rpm – 230/400V – 50 Hz Direct motor-to-disc drive Disc arbor, Ø 32 mm Blade rotation at 4 different speeds (15 – 30 – 45 – 90 rpm) Pneumatically rotating worktable from 90° to 45° inwards Head with vertical sliding movement on a linear guide First head, fixed Second head, mobile: automatic positioning with manual override option Positioning speed (automatic) of the mobile head: 20 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Roller conveyor for the mobile head (3 m) Minimum cutting length between the two heads: 480 mm Kledozl Ub Dopfx Aftow Maximum cutting length between the two heads: 5000 mm Manual kit for undercutting Oleopneumatic disc feed (adjustable feed speed – rapid approach and retraction)

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 205-043-095, TTB TGC 64 F – 2007 | High-Precision CNC Tool Grinding Machine Fully overhauled by the manufacturer TTB Engineering SA and from a single owner. For sale: TTB TGC 64 F, year 2007, a high-precision CNC tool grinding center designed for the production and regrinding of cutting tools in carbide, HSS and other materials. The TGC series (Tool Grinding Center) is a well-established platform developed for the manufacturing of high-precision tools with micrometric accuracy. Equipped with a reliable Fanuc control system, this machine offers excellent performance, repeatability, and long-term stability. With its 5/6-axis configuration, the TGC enables the production of complex tool geometries and ensures maximum flexibility for a wide range of applications, including drills, end mills, and special tools. TTB machines are known for their exceptional thermal and mechanical stability, allowing continuous production over long periods with minimal operator intervention and consistent micron-level precision. Key features: CNC tool grinding center (5 or 6 axes) Ksdpfoy D Sb Iex Aftolw Fanuc control system Suitable for carbide, HSS, and special materials High precision and repeatability (micron range) Ideal for production and re-sharpening of cutting tools Robust Swiss-built machine with high reliability The TGC model is the predecessor of the Evolution series and remains a proven and reliable solution in tool manufacturing environments.

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Kljdjyzaz Repfx Aftjw Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: excellent (used), Chip breaker slot grinder for HSS saws Peruzzi model SR600 Kedpfx Aowdybceftjlw

Condition: excellent (used), Chamfering machine for HSS saws Pedrielli model PGS Kedpoul Tylsfx Aftolw

Condition: excellent (used), Chip breaker slot grinding machine for HSS saws BUSINARO model Mikron Kljdpfx Aeul Tdkjftow

Condition: excellent (used), HSS saw grinder VOLLMER model CMS 10M Klodpei Hchdefx Aftow

Condition: excellent (used), HSS saw grinder Schmidt Tempo model AS2 Kodpourvx Djfx Aftjlw

Condition: used, Year of construction: 2005, functionality: fully functional, collet bore: 18 mm, spindle speed (min.): 2,800 rpm, grinding wheel diameter: 100 mm, type of input current: three-phase, overall weight: 45 kg, total height: 350 mm, total length: 400 mm, total width: 450 mm, Equipment: lighting, Stichelschleifmaschine Pregraph U2 Year of manufacture: 2005/11 Type: Tool grinding machine U2 For grinding scribing tools, milling cutters and all round parts. The machine is a Taiwanese replica of the well-known German model, but with an improvement: the grinding wheel can be adjusted axially to the dressing tool, thus maintaining the setting. There are many replicas, but most are not suitable for professional use. We use this machine ourselves in our workshop and it is equal to the German original. Kljdpfx Afezldwnotsw Motor power: 0.25 kW Speed: 2800 rpm Grinding wheels: Ø 100 mm Dimensions: 450 x 400 x 350 mm Weight: 45 kg Included: 1 pc. cup grinding wheel for steel/HSS, used 1 pc. cup grinding wheel for carbide, used 1 pc. diamond cup grinding wheel for carbide, used 1 pc. cut-off wheel Ø 100 x 1 for steel/HSS, used 1 pc. holder for cut-off wheel 35 pcs. collets Ø 0.5 to 17.5 in 0.5 increments 16 pcs. collets (e.g. 1/8" and special sizes, some duplicated) Machine light Operating manual Optional: NEW, unused stock items: Collets type 355E; from Ø 0.5 to 18 mm, in 0.5 mm steps and fixed collets Ø 18 / 20 / 25 mm Cup grinding wheel Ø 100 x 50 mm for steel/HSS, grit 80 (medium) Cup grinding wheel Ø 100 x 50 mm for steel/HSS, grit 120 (fine) Diamond cup grinding wheel Ø 100 mm for carbide, grit D126 (medium) Diamond cup grinding wheel Ø 100 mm for carbide, grit D64 (fine) Cut-off wheels Ø 100 x 1 mm Flanges for grinding wheels, also with balancing option Balancing stand with mandrel for balancing grinding wheels Tool bit grinding attachment Drill bit grinding device Base cabinet Dimensions: 445x345x840 mm Weight: 26 kg

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm Kjdedcdwbopfx Aftjlw The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller Ksdpfxscq E Uus Aftslw - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: new, Bernardo Spiral Drill Bit Set, 25 pieces - 1 - 13 mm - 0.5 mm step increase - HSS TiN coated Kjdjikamfepfx Aftslw

Condition: new, Technical specifications: Drill diameter: 13 - 32 mm Point angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Motor power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Features: - Ideal for grinding HSS/carbide spiral drills - Safe operation due to a guided grinding process - Point angle adjustable from 90° to 140° - Compact design, with collet storage in the machine and a handle for quick stowing - Includes a pointing device to reduce the feed force - Device for back-grinding the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearings Scope of delivery: - CBN grinding wheel - 20 ER 40 collets, 13 - 32 mm Kodpfed R A Dkox Aftjlw - ER 40 collet holder

Condition: new, Technical data: Drill diameter: 3 - 32 mm Point angle: 90° - 140° Grinding wheel speed: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions L x W x H, approx.: 360 x 250 x 310 mm Features: - Ideal for grinding HSS/carbide spiral drill bits - Easy operation - Safe operation thanks to forced grinding process - Point angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including a centering device for perfect centering of the drill bit on the workpiece and to reduce the feed force during drilling - Device for back-grinding the drill bit cutting edges to reduce friction between the drill bit and the workpiece - Rotor with precision ball bearings - Vibration-free operation due to high inherent weight - CE Scope of delivery: - CBN grinding wheel - 10 ER collets ER 3 - 12 mm, 20 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) Kledpsh Hyrbjfx Aftjw - ER 20 and ER 40 collet holders

Condition: new, Special price including shipping within Germany (excluding islands) While supplies last Technical data: Drill diameter: 3 - 13 mm Point angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.18 kW Weight, approx.: 8.1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for sharpening HSS/carbide spiral drills - Safe operation due to forced guidance of the grinding process - Point angle adjustable from 90° to 140° - Compact design, with collet storage in the machine and a handle for quick storage - Includes a pointing device to reduce feed force - Device for back-grinding the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearings Scope of delivery: - CBN grinding wheel - 11 ER 20 collets, 3 - 13 mm - ER 20 collet holder Kodpfxjd R A Dcj Aftelw

Condition: new, Technical data: Drill diameter: 3 - 20 mm Point angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12 kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Ksdpfx Ash Hyqweftslw Features: - Ideal for sharpening HSS/carbide spiral drills - Safe operation due to forced grinding process - Point angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Includes a pointing device to reduce the feed force - Rotor with precision ball bearings - CE Scope of delivery: - CBN grinding wheel - 11 ER 20 collets, 3 - 13 mm - 7 ER 24 collets, 14 - 20 mm - ER 20, ER 25 collet holder