Used Hps for sale (6,286)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Rbsdpsxn Srxefx Ahzst Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: used, functionality: limited functionality, Year of construction: 2019, operating hours: 613 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fuel type: electric, mast type: simplex, construction height: 1,315 mm, drive type: Elektro, Stand-on forklift Mast type: Standard Condition: Ready for operation and fully functional Technical condition: poor Rbjdpfx Aexux E Eshzst Battery voltage: 24V Initial lift,

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: SG98Q11002, total length: 5,740 mm, total width: 1,380 mm, total height: 1,770 mm, Product Name: HP Stitch S1000 126in Rbedoxb A Rfopfx Ahzot Serial Number: SG98Q11002 Total printed substrate: 21060 m2

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,503 h, load capacity: 1,200 kg, lifting height: 1,784 mm, fuel type: electric, mast type: simplex, drive type: Elektro, Pedestrian stacker Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Rjdpoxr Sbnsfx Ahzobt Initial stroke,

Condition: used, Year of construction: 2020, total length: 1,550 mm, lifting height: 200 mm, load capacity: 2,500 kg, Warehouse technology Still Handhubwagen HPS25 Rjdpfx Ahexd Hxrjzjbt Drive No Drive Year built 2020 Lifting height (mm) 200 Lifting weight (kg) 2,500

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear Rsdpfxjltrmue Ahzobt - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm Rbodpfx Aho Dqaqozet rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm Rsdpsxgt Tzsfx Ahzebt MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top Rbsdsw Sttaepfx Ahzet - motorized crowning

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,738 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fuel type: electric, mast type: simplex, construction height: 1,315 mm, drive type: Elektro, Pedestrian stacker Mast type: Standard Rsdjxfd E Sopfx Ahzebt Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Battery type: Lithium-ion Initial stroke,

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm Rbodpfx Ajb Rk Ekjhzjt - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm Rbsdetqmvzspfx Ahzjt - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm Rodjhrakvjpfx Ahzobt throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm Rbsdpfsd Ih S Ujx Ahzot max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW Rbodpfx Ahswbuurozjt EQUIPMENT - Various special tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 209255, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 110 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Control system: DNC70 Pressing force: max. 1,100 kN Rbedpfx Aswkqr Sohzet Oil volume: 340 l MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 380 V Control voltage: AC 220/24 V Rated current: 37 A Rated current of the main fuse: 63 A EQUIPMENT - 1 set of upper and 1 set of lower tools

Condition: ready for operation (used), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of use, 100% functional, scope of delivery as per photos Rsdpsulqg Nefx Ahzobt

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Redew Slnispfx Ahzebt Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Rbjdpfx Ahjw R Aamozet Daylight: 800 mm Cushion: 20t

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,497 h, load capacity: 1,200 kg, lifting height: 1,924 mm, free lift: 895 mm, fuel type: electric, mast type: duplex, construction height: 1,415 mm, drive type: Elektro, Pedestrian stacker Mast type: Duplex Condition: Ready for use and fully functional Rbodpfx Ahew Ua U Aezet Technical condition: good Battery Volt: 24V

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,119 h, load capacity: 1,200 kg, lifting height: 1,924 mm, fuel type: electric, mast type: simplex, construction height: 1,490 mm, drive type: Elektro, Pedestrian stacker Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Battery type: Lithium-ion Initial stroke, Rodowvcz Aopfx Ahzobt

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,176 h, load capacity: 1,200 kg, lifting height: 1,924 mm, fuel type: electric, mast type: simplex, construction height: 1,490 mm, drive type: Elektro, Pedestrian stacker Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Rodpfx Ahewvc E Uszsbt Initial stroke,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,555 h, load capacity: 1,200 kg, lifting height: 1,924 mm, fuel type: electric, mast type: simplex, construction height: 1,490 mm, drive type: Elektro, Pedestrian stacker Rodjvyv Swspfx Ahzsbt Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Initial stroke,

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Rbsdpfxjwlip Ej Ahzst Available immediately. Subject to errors and prior sale.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 11/2022, loading space length: 7,400 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, loading space volume: 26 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, BPW axles, air-suspended, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, U-protection, chute Body: Steel body approx. 26m³ with platform and roller tarpaulin 3x 9t BPW axles, drum brake! Internal tailgate! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Rbjdpfevhit Rex Ahzet - .