Used Horizontal Drill for sale (10,409)

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Ljdexqfwtopfx Ahvsri

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Lsdpfeibh S Hox Ahvsri Bottom thickness 12mm Equipped with a ladder.

Condition: good (used), Protech Horizontal Collator Model: HC2010 Lredpfx Asv T D Dushvsi Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Lsdpjyq Irhefx Ahvori Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm Lredsyua Ivepfx Ahvji MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: A.100765.01, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 6,000 rpm, The machine spindle was overhauled in 2015! TECHNICAL DETAILS Travel X-axis: 1200 mm Travel Y-axis: 1000 mm Travel Z-axis: 1200 mm Spindle speed: 25 - 6,000 rpm Max. torque: 900 / 1130 Nm Number of tables: 2 Maximum interference diameter: 1200 mm Table rotation speed: 15 rpm Lsdpfx Ahjytfmzovori Table clamping torque: 10,000 Nm Tilting moment: 29,000 Nm Distance between spindle nose and table: 130 mm Pallet dimensions: 800 x 630 mm Pallet change time: 16 s Transport weight: 1,200 kg Number of tool stations: 250 Maximum tool diameter: 125 mm Diameter with adjacent stations free: 250 mm Maximum tool length: 650 mm Maximum tool weight: 40 kg Tool change time: 2.5 - 4.5 s Average chip-to-chip time: 7 - 9 s Tool holder: SK 50 DIN69871 Feed rate: 1 - 36,000 mm/min Rapid traverse: 36 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 10,000 x 6,000 x 3,800 mm Machine weight: approx. 30,000 kg Operating hours: approx. 100,000 h (The machine was operated in 2-shift + ghost shift mode. The previous owner estimates approximately 100,000 hours over 20 years of operation.) EQUIPMENT Direct measurement via glass scales Coolant system 1,250 L High-pressure pump 11 bar (coolant) Through-spindle coolant 25/50 bar (TSC) Blow-out device for spindle taper Paper filter system Chip conveyor Pallet changer 2 pallets Set of tool holders Coolant/mist extraction Touch probe

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Ljdpfxeyv A A He Ahveri Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Ledpewuz Dgefx Ahvjri Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: ready for operation (used), Year of construction: 2018, Horizontal Machine Center DMG MORI NH 5000DCG/40 Year 2018 Tavel X 730 Y 760 Z850mm Fully C axis 0.001 degree MAPPS FAUNC Spindle 14,000rpm Ljdjyt Iubjpfx Ahvsri 37/22KW at 303Nm HSK-A63 Taper 60 ATC Pallet 500 x 500mm

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm Lrodow Dvkaepfx Ahvoi --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, max. wheel diameter 40 mm gear width 45 mm max. module 1 clamping length max. 75 mm number of teeth 5 - 399 hob turning speeds 320 - 3200 U/min Lsdoyh Rmgspfx Ahvsri weight of the machine ca. 0,6 t Fully Automatic Gear Hobber with Loader for small gears

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor Ljdpfxovf N Sus Ahvori approx. 450 cm.

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min Lrsdpfx Ahoub Amfsvei - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Ledjw N S Ecopfx Ahvjri Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 Lredpfjuhhzhex Ahvoi table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Lodevylh Uspfx Ahvjri Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: used, Year of construction: 2019, total height: 2,450 mm, total length: 9,500 mm, total width: 2,400 mm, Empty weight: 5.000 kg Price: On request CNC SCM Morbidelli M100  Brand SCM Type Morbidelli M100  Year of construction 2019 Serial number AA100001570 Machining table dimensions 5510x1620 mm (LxW) 400 Volt / 50 Hz PRO-Speed safety system TEPCAD control panel with touchscreen colour display TBR14 linear tool changer (Y=1620 positions) FAST14 linear tool changer Air blower on electro spindle Guard rails X-Y axes Vacuum pump 150/300 m3/h  50/50 Hz 5-axis unit ‘JQX’ version, 13.5 kW Fixed pod 145x145 H=75 mm Rotating pod 145x55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect: 1 year (gateway kit ‘plug&play’ included) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE human-machine interface software (HMI) Maestro software for cnc programming Hardware key for Maestro cnc Advanced Maestro 3D module Additional key for Maestro cnc (USB port) Windows 10 embedded 64-bit operating system Console with integrated PC ‘eye-M PRO’ Axis movement  Maximum vectorial speed in rapid traverse XY axis 56 m/min Stroke of the Z axis 180 mm Routing unit Motor power 5.5 kW  Speed 4000 rpm Tool changer up to 44 locations Air consumption 4430 m3/h Air speed 25 m/sec Connection diameter 250 mm Total dimensions 9700x5020x2650 (LxWxH) - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA10001570 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Main motor power [kW]: 13.5 - Type milling table: Beam table - Safety feature: Bumper guard, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Tools included: Yes - CNC options: Offcut conveyor - CNC documentation available: USB stick - Working range X [mm]: 5515 - Working range Y [mm]: 1620 - Z-axis working range [mm]: 180 - Transport dimensions: 9500mm x 2400mm x 2450mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Lsdewnibtspfx Ahvori

Condition: good (used), functionality: fully functional, input voltage: 380 V, spindle mount: MK 4, drilling depth: 250 mm, actuation type: electric, rotational speed (max.): 1,500 rpm, rotational speed (min.): 85 rpm, throat depth: 320 mm, table width: 500 mm, table length: 500 mm, overall weight: 1,250 kg, Equipment: CE marking, Drilling capacity steel: ø 40 mm Spindle taper: MT 4 Lodoyw Iqlspfx Ahvori Spindle speed: 85 - 1500 rpm Throat: 320 mm Quill stroke: 250 mm Table clamping area: 500 × 500 mm T-slots: 3 pcs, 18 mm Automatic feed: 0,1 - 0,16 - 0,25 - 0,4 mm/rev Supplied with: Workpiece clamp Drill protection hatch Country of origin: Germany Motor power: 2,3 kW Machine (L×W×H): 100 × 60 × 245 cm Machine weight: 1250 kg

Condition: used, Empty weight: 6.000 kg Price: On request - Documentation available: No - CE certificate present: No - Transport weight [kg]: 6000kg Lrjdpfxjyw Hr Ue Ahvji - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ Lredpfsu Dahnsx Ahvei FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER Lredpfx Ahsxvfuvevei X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER Lrsdpfx Aoh Hfrnjhvoi X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm Lodpfx Aewp Tdzjhvori thread capacity 27 M spindle taper MT 4 MK column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 420x400 mm

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V Lrodpfx Aheya Ihhovji total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Spindle ON: 11.742 hours - autom. vertical feed - table dresser with compensation - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min Lrjdpevgmitofx Ahvsi pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm *