Used Horizontal Borer for sale (6,654)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Iedozypmqopfx Apceig Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 54, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,100 mm, feed length X-axis: 1,400 mm, nominal power (apparent): 170 kVA, controller manufacturer: siemens, controller model: Siemens Sinumerik 840Dsl, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hello, I am selling a DIXI DH 100 II: a 4-axis, dual-pallet CNC milling machine from 2012. Price: 690,000 PLN net. Machining range: X = up to 1400, Y = 1100, Z = 1100 (workpiece weight up to 2500 kg) Spindle: 12,000 RPM, 36 kW Tool holder: HSK A 100 Iodozlxmdspfx Apceig Table: 1000x1000, 2 pcs Tool magazine: 150 positions Coolant through spindle: 70 bar Configuration: Base machine Universal horizontal machining center DIXI DHP 100 4-axis version Control system Siemens SINUMERIK 840DSL Main drive Electric spindle 12,000 RPM Magazine 200-position tool magazine HSK 100 Machine table 2 pallets, 1000 x 1000 mm Cooling / chip removal Chip conveyor with 6 bar pump Coolant tank: 1,400 l Internal coolant supply: 70 bar Cooling unit: CSW2200 PMS Measurement / control Renishaw 3D RMP60 probe BLUM laser probe for tool measurement Additional options 2x Manual rinsing of the machining area – gun Manual control panel (handwheel) 4-color signal lamp Losma oil mist extractor 3 working modes Rotating window in the machine door Automation Automatic pallet changer Documentation Operating manual and electrical diagrams Monitor language English Training Not included

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D SL, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 54, Equipment: chip conveyor, - Direct measuring system - Drill breakage monitoring - Chip conveyor - Knoll coolant system with high pressure - Tool changer: 54-position - Tool holder: SK40 Ijdpfx Aszugt Dopcjig - Pallet changer: 2-position - Pallet size L/W: 500 x 400 mm

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic area: 400 x 175 mm Vertical adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm Complete with: - Coolant system - Hydraulic unit Iisdpfxjv Tcy Ue Apcsg - Documentation Country of origin: Germany Motor power: 1.5 kW Machine dimensions (L x W x H): 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, horizontal glass wasching machine suitable for a double edger or line . working width : 2600 mm min. glass size : 300 x 150 mm motorized height adjustment of the whole upper section up to 500 mm for a quick and easy internal inspection and maintenance Iedozzn Szepfx Apceig automatic thikness device up to 50 mm controlled by PLC pre wasching zone number of brushes : 4 number of water tanks : 2 number of air knives : 4 total power : 38 Kw voltage : 400 V 50 Hz

Condition: used, Year of construction: 2009, total height: 4,400 mm, total length: 7,640 mm, total width: 5,630 mm, overall weight: 27,000 kg, EDEL CYPORT CP 3020 – 5-Axis CNC Gantry Machining Center Technical Data: Gantry clearance height: 1,380 mm Table size: 5,000 × 2,300 mm Iedpfsz Dgmyjx Apcsig A-axis: ±110° C-axis: ±360° Spindle power: 27 kW Spindle torque S1: 130 Nm Spindle torque S6: 170 Nm IKZ: up to 40 bar Workpiece measuring system: M&H with wireless probe Coolant system: with band filter Direct measuring systems: in all linear axes Automatic central lubrication Spindle cooling Ethernet interface Safety features: safety bumper, light grid, and lamella curtains Travel Z-axis: 1200 - mm Dimensions (LxWxH) approx.: 7640 x 5630 x 4400 mm Travel X-axis: 3000 - mm Feed speed Y-axis: 30000 - mm/min Spindle speed: 12000 - rpm Weight approx.: 27,000 kg Travel Y-axis: 2000 - mm Feed speed Z-axis: 15000 - mm/min Tool Changer: Yes Feed speed X-axis: 30000 - mm/min Number of tool locations: 48 Control: Heidenhain iTNC 530 Year of construction: 2,009 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: CE marking, documentation/manual, 4 axis, flex5+, edgebanding, MPU (Multi Processing Unit) Iiedpfx Aez A Szaopcjg

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Iedpfxjz Ahmzs Apceig Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, Mitsui Seiki HU40A (2005) is a high-precision horizontal machining center: * axis travel: 560 × 560 × 560 mm, * spindle: 12,000 rpm, power 11–15 kW, BT40 taper, * tool magazine with 60–220 positions, * new FANUC CNC systems, * large workspace and cooling system, Iisdpjwwrw Nefx Apcsg * chip conveyor.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Isdpfx Asz A Tzbspceig Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: like new (used), Year of construction: 2017, Horizontal machining center OKK Rotary pallet Type HM630 Year 2017 CNC Fanuc Series 310i-s model Chip conveyor Approximately 3 tool holders with ISO 50 mounting Tilting and forklift-compatible chip bin by GOUBARD Inspection points with shelves and illuminated fan Double-sided tool displays Buffer tank Ijdpfszr Iihox Apceig

Condition: used, Year of construction: 2004, machine/vehicle number: AL/007522, functionality: fully functional, operating hours: 25,000 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,870 mm, travel distance Y-axis: 1,465 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 3,870 mm, workpiece width (max.): 1,465 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 100 kg, number of axes: 3, number of slots in tool magazine: 10, actuation type: electric, total height: 2,700 mm, total length: 5,800 mm, total width: 3,500 mm, overall weight: 3,800 kg, table length: 3,870 mm, table width: 1,465 mm, year of last overhaul: 2023, Equipment: documentation/manual, For sale: a fully functional CNC machining center, Morbidelli Author, manufactured in 2004. The machine features a 7.5 kW main spindle with HSK63F tool holder, a tool magazine with 10 positions, a drilling head with 24 positions, an additional mortising head, and a powerful vacuum pump with a capacity of 190 m³/min. It is in very good technical condition, regularly maintained, and still in operation. A significant advantage for the buyer is the opportunity to personally inspect and test the machine in real-time during actual production. Thanks to this extensive configuration of the drilling head and mortising unit, the machine is ideal for both custom and series production of wood products, furniture, frames, or doors. We will also include a spare spindle, which requires a position sensor replacement. Isdezzmhnopfx Apcjig

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 66 kW (89.73 HP), cutting height (max.): 300 mm, cutting width (max.): 400 mm, Equipment: CE marking, Horizontal thin-cut band saw with 3 stations Manufacturer: Allwin Type: AW-400-3 Year of manufacture: 2013 Horizontal thin-cut block band saw with 3 stations, originating from a parquet manufacturing facility. Suitable for cutting individual lamellas. Max. cutting height approx. 300 mm Max. cutting width approx. 400 mm Iedpezyx Epjfx Apceig Approx. 22 kW / 30 HP per station Data partially estimated!

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Iijdpfxez A R Iro Apcsg Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Iijdozwt Ndopfx Apceg Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: used, Year of construction: 2006, operating hours: 45,559 h, functionality: fully functional, machine/vehicle number: 183519, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, overall weight: 11,350 kg, - Year of manufacture: 2006 - Worktable: pallet size 500 x 500 mm Iedpfeylh R Tsx Apcoig - Workpiece dimensions: max. 800 x 1000 mm - Travels: X 730 mm / Y 730 mm / Z 740 mm - Spindle diameter: 215 mm - Control: Mazatrol PC Fusion CNC 640M - Feed rate: 1 – 60,000 mm/min - Rapid traverse (X, Y, Z): max. 60 m/min - Speed range (2 steps): 35 – 12,000 rpm - Internal coolant supply – 70 bar - Renishaw measuring probe - Chip conveyor - Tool magazine: equipped with 160 slots + approx. 60 additional tools - Palletech high-bay system: 16 pallets + 2 loading stations - Machine hours: 45,559 h - Machine weight: approx. 11,350 kg - Serial no. 183519 Net price excluding dismantling and unloaded ex-works Luckenwalde (Germany), without transport

Condition: used, Year of construction: 2012, Deckel Maho NHX 4000 Horizontal Machining Center Iedpfezxc H Uox Apcoig Horizontal Machining Center, Deckel Maho Type / Model: DMG NHX 4000 Condition: Used Year of Manufacture: 2012 Program Runtime: approx. 48,200 hours Spindle Hours: approx. 39,200 hours Technical Data Travel distances X / Y / Z axis: 560 mm / 560 mm / 660 mm Rapid traverse rate (X/Y/Z): 60 m/min Work table & Pallets: 2-way pallet changer, standard (APC) Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece dimensions (Ø x H): Ø 630 x 900 mm Pallet changing time: approx. 8.0 seconds B-axis (rotary table): 360° (division 0.001°, direct drive) Main spindle Max. speed: 12,000 rpm Drive power: approx. 11 kW Max. torque: approx. 110 Nm Tool interface: SK 40, tool changer STC Tool changer (ATC) Magazine slots: 60 magazine slots Max. tool diameter: 70 mm (with free adjacent slots up to 170 mm) Max. tool length: 450 mm Max. tool weight: 12 kg Electrical data Power connection: 400 V 3/N, PE 50 Hz Power consumption: 33 kVa In max.: 48 A Max. fuse rating: 80 A DC control voltage: 24 VDC AC supply voltage: 230 VAC Equipment 1: Smartline Line 36kW Equipment 2: NX15 Dimensions & Weight Machine weight: approx. 8,000 kg Footprint / Dimensions (W/D/H): approx. 2,680 x 2,540 mm Control: Siemens 840D SL Equipment Indexing table Tool measuring system, 60 tools SK40 Direct measuring system Tool breakage control MSC Coolant system IKZ 35 bar Chip conveyor Signal light Inquiry item: Transportation costs in individual offer

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Horizontal baling press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device, semi-automatic. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Ijdpjz A T Tqjfx Apcjig Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. Iodoz Adt Ropfx Apcoig - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 2011, total height: 2,550 mm, total length: 5,600 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 65352 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Flat table - Tool holder: ISO30 Iodpozuazuofx Apceig - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 1.7 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM1322AVM - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 0 - └ Oil free: Yes - Tools included: Yes - Table length [mm]: 3750 - Table width [mm]: 1560 - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Z-axis maximum stroke [mm]: 324 - Installed length [mm]: 6465 - Installed width [mm]: 4794 - Installed height [mm]: 2550 - Transport dimensions: 5600mm x 2250mm x 2550mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Ijdpfx Apsz Aaggecjig Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, Year of construction: 1987, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, We offer this used HELLER BEA 05 horizontal machining center, year of construction 1987. Type: BEA 05 Serial number: 40311 Year of manufacture: 1987 Phase: 3~ Voltage: 380 V Frequency: 50 Hz Nominal current: 79 A Circuit diagram number: 5151 Manufacturer: HELLER Model: BEA 05 Year of manufacture: 1987 Control: uni-Pro NC80-C Technical Specifications Vertical CNC Machining Center CNC control: uni-Pro NC80-C Vertical spindle Isdpfx Apozivzyscjig SK50 spindle taper Rotary CNC table (4th axis) Automatic tool changer Machine weight: approx. 7,000 kg Installed power: 50 kW Power supply: 380 V / 50 Hz Air supply: 6 bar Floor space required: approx. 4.0 × 4.2 × 3.1 m The machine is working and used condition. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Equipped with a roller conveyor. Cutting capacity: Ø 400 mm. Isdpfxez Ap Exs Apcjig Machine weight: 2,850 kg.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Iedpfx Apez A T Arjcoig Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided and any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2000, functionality: fully functional, USED AUTOMATIC ROTARY SAW, SCORTEGAGNA RUSCH 260/320 AF, overhauled like new. READY IN STOCK Isdpfx Aszhui Topcsig