Used Horizontal Bandsaw for sale (6,649)

Condition: good (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,200 mm, Travel path B: 0-360° Travel path A: +45° to -90° Spindle interface: HSK 100 Rotary spindle diameter: 200 mm Spindle speed: 15,000 rpm Chain magazine: 60 positions Pallet changer Chip conveyor High-pressure coolant through spindle Coolant filtration system Dodpszcn Elofx Ah Nsuu

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Chip conveyor Duedpfx Aezcn D Ush Neu Pallet changer Coolant filter unit High-pressure coolant through spindle

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Dedpfxsyf Nu Te Ah Nsuu

Condition: used, Year of construction: 2006, Doosan Daewoo Ace-VC500 Twin Pallet Horizontal Machining Centre with Fanuc Series 21i-MB CNC Control (2006) Please Note: These lots are located in Italy. All/Any tooling is being offered as specifically described. Duodpfx Aozcnb Heh Nou

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Dusdpfx Ahezcla Hs Nju Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Dujdpjzck Uisfx Ah Nou Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Dujdpfov Sg T Njx Ah Neu Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm grinding width 200 mm Djdjzbczrepfx Ah Nouu

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Duodpsxy Hrqsfx Ah Nju Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Package dimensions: 495 × 760 × 470 mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm Dsdpfxsypv T Re Ah Nsuu 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm Dujdpfx Ahow Ng D Hs Neu weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: used, Year of construction: 2002, Technical details: Duodpfx Ahowdywde Nsu spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: used, Year of construction: 1987, grinding length:520 mm Duedpfecxxy Uox Ah Neu grinding width:160 mm workpiece height:300 mm magnetic clamping plate, electical:BxT=520X160 mm wheel diameter:230 mm Year:1987 weight of the machine ca.:1,5 t dimensions of the machine ca.:LxBxH 1,5x1,8x1,6 m

Condition: used, Year of construction: 2013, DMG DMC 65H duoBlock Horizontal machining center Year of manufacture: 2013 Operating hours: approx. 50,000 h Spindle hours: approx. 26,000 h Dedpfx Ahoza Ezro Nouu Siemens Sinumerik 840D sl control system HSK 63 tool interface 10,000 rpm spindle speed 180-position tool changer 10-position pallet changer

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Duodpfx Ahoh Dy Rfj Neu Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), functionality: fully functional, power: 1.47 kW (2.00 HP), input voltage: 200 V, cutting height (max.): 1,000 mm, empty load weight: 740 kg, throat depth: 1,000 mm, Vertical Variable Speed Bandsaw with Stationary Table Dsdpfx Aewr Nlyjh Nsuu manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Dsdpfjwq Iwxsx Ah Neuu Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Duodezb Il Nopfx Ah Nju Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: defective spare-parts repository (used), Year of construction: 2002, operating hours: 34,188 h, functionality: not functional, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, nominal power (apparent): 65 kVA, torque: 200 Nm, controller manufacturer: Siemens, workpiece height (max.): 750 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, total height: 2,700 mm, total length: 4,700 mm, total width: 3,400 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, rotational speed (max.): 25 rpm, overall weight: 12 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,801 h, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, For sale is a horizontal CNC machining center, HECKERT CWK 400 D. The machine is currently not functional and is therefore explicitly offered as defective / for spare parts / for refurbishment. Manufacturer: Starrag Heckert Type: CWK 400 D Control system: Siemens Sinumerik 840D Axes: 4 axes (X/Y/Z + B-axis) Pallet changer available Spindle with only 2,801 operating hours → very good basis for repair Pallet pool with a total of 23 pallets: 15 pallets with threads Duodpfjzb Hfbex Ah Nou 8 pallets with grooves Machine is still connected to the power supply → inspection under power is possible Coolant system / chip conveyor / typical equipment available (machine-dependent) Immediately available Buyer is expected to dismantle the machine themselves Loading can be supported upon agreement Due to the condition, the sale is made without warranty or the possibility of return. Inspection is strongly recommended.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Djdpszb Dhtefx Ah Nouu Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Dsdpfownii Rsx Ah Nsuu - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - System/software: SCM Maestro - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg - Details: Dsdpfx Ajyz Ad Ish Nsuu - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, Colour: White Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Duodpfx Asycwupeh Nou Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA10000992 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 6000 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 15 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 12 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Table length [mm]: 5020 - Table width [mm]: 1380 - Working range X [mm]: 5020 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 5400 - Y-axis maximum stroke [mm]: 1650 - Z-axis maximum stroke [mm]: 450 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1998, total length: 2,600 mm, total width: 1,500 mm, total height: 2,100 mm, Empty weight: 1.500 kg Dedpfxox Ad Uzo Ah Nouu - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: P30162 - Drive system: Teach-in - Power [kW]: 7.5 - Centre height [mm]: 200 - Swing over bed [mm]: 400 - Carriage turning diameter [mm]: 245 - Distance between centres [mm]: 1250 - Bed width [mm]: 320 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 2500 - Options: Three-jaw chuck, Removable bed - Swing over removable bed [mm]: 585 - Transport dimensions: 2600mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,700 mm, total length: 3,800 mm, total height: 2,000 mm, Empty weight: 6.000 kg CNC Internal grinder, converted from a CNC lathe - Documentation available: Yes - CE certificate present: No - Serial number: UC-1871 - Drive system: CNC - Power [kW]: 15.0 Dedpfxsw A I Uhj Ah Nsuu - Centre height [mm]: 115 - Swing over bed [mm]: 380 - Distance between centres [mm]: 635 - Spindle bore [mm]: 75 - Max. spindle speed [rpm]: 3500 - Options: Removable bed - Swing over removable bed [mm]: 520 - Transport dimensions: 3800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum