Used Horizontal Band for sale (9,764)

Condition: new, cutting diameter 220 mm Gusdpfxefgyh Ne Afroh saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling Gsdefgyh Topfx Afrouh

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: Gusdpfxofg E H Se Afrjh * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 18 - 110 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function Gusdpfx Aenq Sanefroh - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 10370 € 199.1 € Schwenkrahmen 3120 mm 35/70 m/min 280 mm Gsdpfx Afsynmq Djrjuh 240 mm 350x140 mm rund 230 mm, quadrat 200 rund 150 mm, quadrat 130 rund 200 mm, quadrat 170 830 mm 1550 mm 1400 mm 1750 mm 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 82900 € 1566.81 € Doppelsäulenführung 8400x54x1,6 mm 20-100 m/min 650 mm 1000 x 600 mm rechteck 660 x 600 mm rechteck 440 x 600 mm rechteck 660 x 600 mm 880 mm 4 kW 7.5 kW 0.12 kW 4400 mm 2270 mm 2660 mm 6520 kg hydraulic vice digital readout for scale of bending angle Gedpfx Afsynm N Torouh hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 Guodpfou N Axgsx Afreh contact: Mr. Rainer Eckerle

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW Gusdpfefd Abajx Afrsh weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Year of construction: 2021, condition: new, Wravor WRC 1050 Max. cutting length: 6.5 m We would be happy to configure a new band saw to meet your specific requirements. Gusdpfxegyw R Ss Afreh

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Gujdpfx Ajfgyh Sofrjh Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable Gusdpfxefgyias Afrjh - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm total power requirement 30 kW Gujdpjzmy Sqefx Afroh weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1996) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 6319 101 004 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Roller conveyor load capacity: 20,000 kg Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750

Condition: used, cutting diameter 360 mm saw band length 0 mm cutting width 0 mm Gedozafktopfx Afreuh cutting speed 0 m/min total power requirement 1,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 2,2 x 2,05 x 1,5 m Horizontal Bandsaw - Max. Miter Angle: 45° - Coolant System - Emergency Stop - 1300 mm Infeed Roller Conveyor - 2 Spare Saw Blades

Condition: used, Year of construction: 1978, cutting diameter 420 mm saw band length 4870 mm cutting width 500 x 250 mm table height 640 mm size of profile - max. 400 x 400 mm cutting speed 40 - 120 m/min saw band length 4870 x 27 x 0,9 mm total power requirement 3,0 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Includes 4 spare saw blades Gedezhn T Sjpfx Afrjuh

Condition: new, Year of construction: 2025, cutting diameter 1600 mm saw band length 14000 mm cutting width 1600 mm hydraulic motor 3 kW total power requirement 11 kW / 7525 Nm weight of the machine ca. 20 t required space 4020 X 2220 X 7600 mm Custom-made: KSY 1600 × 1600 horizontal band saw Guedjymf Rgjpfx Afroh Technical specifications: - Max. cutting diameter: 1,600 mm - Saw blade length: 14,000 mm - Cutting width: 1,600 mm - Machine weight: approx. 20 t - Installation dimensions (L × W × H): 4,020 × 2,220 × 7,600 mm Delivery time: approx. 5 months Customised adaptations in terms of dimensions and design are possible by arrangement. Optional equipment: - Clamping devices (choose from conventional, semi-automated or fully automated) - Motorised roller table system - Laser cutting line display - Additional double roller table - PLC control with operating screen - Vibration damping system

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Godpfx Afofg E Hporsuh Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Year of construction: 2007, conveyor belt Frasch 3000x400 mm price: 2.500 Euro year: 2007 Gedpfsini Duex Afreuh contact: Mr. Rainer Eckerle

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Godpfx Afed Iip Noreuh Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V Guedpfxohpktro Afrsh total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: excellent (used), Year of construction: 2005, Horizontal cooling conveyor 3x 3500x300 mm wide price: 2.900 Euro year: 2005 Godpfxelvtndo Afrsuh contact: Mr. Rainer Eckerle

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW Gujdpsd Iipxefx Afroh weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 167.52 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm Gsdpfx Afswirpverouh 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm Guodpfx Aed Iip Uofrsh cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm Gujdpfeg Trvrox Afreh cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, Year of construction: 1996, cutting diameter 460 mm saw band length 8350 x 41 x 1,3 mm mm cutting width 1660 mm Gedozmy S Rjpfx Afrouh total power requirement 30 kW weight of the machine ca. 21.900 kg KASTO BBS 460/1660 2 identical machines (same photos; the other machine was built in 1998) Manufacturer: KASTO Maschinenbau GmbH & Co. KG Address: Industriestr. 14, D-77856 Achern-Gamshurst, Germany Type: BBS 460/1660 (Block Band Saw / Horizontal Bandsaw) Series: 101 Machine No.: 63191010041 Year of Manufacture: 1996 DIMENSIONS & WEIGHT Weight: 21.900 kg (data card) / approx. 17,700 kg (foundation plan) Material Support Height: 1,550 mm Machine Footprint (L x W x H): approx. 1.24 × 3.28 × 3.49 m Minimum Installation Space (with accessories/options): approx. 20.19 × 10.67 × 3.95 m Cutting Range (at 90°) Round Material: Ø 460 mm Flat / Block Material: 1,660 × 460 mm SAW BLADE Standard Sizes: 8,350 × 54 × 1.3 mm or 8,350 × 41 × 1.3 mm Alternative (per data card): 8,350 × 54 × 1.3 mm Kerf Width (Set): approx. 2.4 mm Band Wheels: 3 × Ø 350 mm Recommended Quality: Super Bi-Metal Saw Blades (M42) for mild steels, high-alloy tool steels, and stainless steels For extremely hard materials: Carbide-tipped blades PERFORMANCE DATA Band Speed: infinitely variable 14 – 75 m/min Feed Rate (Step Feed): infinitely variable 0.7 – 220 m/min Electrical Connection: 400 V / 50 Hz / 30 kW (total connected load) Coolant Capacity: 6.5 l Noise Level: 73 dB(A) Function Manufacturer Type Power (kW) / Current (A) Speed (rpm) ----- Saw Motor Sieber VM6-1054/750/4 7.5 kW / 15.6 A 1500 Hydraulic Motor BauKnecht DT90-S4F 1.1 kW / 3.0 A 1500 Hydraulic Power Unit Rexroth UL 205S2016294/1 2.2 kW / 5.6 A 1500 Roller Track Motor SEW KG 35 1.2/4.8 kW / 4.6/10 A 750/3000 Band Speed Motor SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Rapid Traverse (Eilgang) SEW KE66 DT 80 N 612 0.12/0.48 kW / 0.69/1.32 A 750/3000 Adjustment Motor Sieber DE26.18 kW / 0.6 A 3000 Coolant Pump Brinkmann TS12/190-65 0.27 kW / 0.63 A 3000 Coolant Pump Brinkmann TB 100/270 0.24 kW / 0.44 A 3000 Chip Conveyor Pump Huber + Moser 693/8F 0.08 kW / 0.65 A 750 Chip Conveyor SEW SA 42 DT 71 DB 0.12 kW / 0.69 A 750