Used Homag for sale (475)

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Kodpsqvnl Tefx Afionc

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom Ksdpfskbx Eaox Afijnc 1 Stk. grooving aggregate with jump for softforming function Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-253-84-7710, CNC-controlled drilling and dowel insertion machine The machine is fully equipped (all available options) Ksdpfx Ajw Rk E Defienc Drilling heads with 5 spindles each, horizontal and vertical Axes in X, Y, and Z directions 2 milling units: 1 horizontal and 1 vertical Milling spindle speed max. 24,000 rpm Clamex can be milled horizontally Clamex can be vertically milled up to a maximum of 50mm into the panel Tool holder Solidfix S3 Tools are not included with the machine 2 vibratory feeders with 2 dowel insertion units Dowel diameters: Ø6mm and Ø8mm 2-position pneumatic stops, program-controlled High-pressure glue pump with glue flow monitoring Automatic cleaning cycle for cleaning the glue nozzles Cleaning system for the glue supply 6 pneumatic hold-down units automatically adjust to the workpiece thickness Climate control unit for the control cabinet and UPS for the PC PowerControl PC87 Powertouch WoodWOP 7.1 Barcodescanner IntelliGuide Classic

Condition: excellent (used), Year of construction: 2018, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 0-250-95-7962, workpiece height (max.): 850 mm, workpiece length (max.): 2,500 mm, power: 11.5 kW (15.64 HP), compressed air connection: 7 bar, Machine is excellent working order with no faults. Kjdstwfv Rspfx Afionc Can be seen working and test it your self. It has low hours, picture will be added soon. Located in Nort East London. Can be shipped anywhere in Europe. Please ask if you need any more info.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,730 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, Main spindle is equipped with C-axis and extension for Flex-5 unit! TECHNICAL DETAILS Machining Area X-axis machining area: 6,000 mm Y-axis machining area: 1,730/1,600 mm Z-axis machining area: 300 mm (80 mm with standard vacuum suction cup) Y-depth of machining: 1,450 mm (1,525 mm at the front stops) Clamping System Number of consoles: 11 pcs. Quick-Move system: automatic console positioning in X-direction Pneumatic clamping elements: 11 pcs., 3-stage, clamping range 15–120 mm Clamping aids: 11 pcs., pneumatically lowerable Vacuum Supply Vacuum pumps: 2 pcs., 66/100 m³/h Spindle and Drive Main spindle power: 15 kW Speed range: 1,500–24,000 rpm Tool holder: HSK 63 Tool changer: 30-position disc-type changer, traveling with X-support Drill Head Drill head: 12 spindles, V12/H4 Drilling spindles in X-direction: 6 Drilling spindles in Y-direction: 7 C-axis Extension Kodpfx Afjw Emdgoionc Designation: C-axis extension for Flex-5 unit Purpose: for automatic changing of the Flex-5 unit Compatibility: in combination with PC85 Control Control: powerControl PC85 with WoodWop 6.0 EQUIPMENT Saw unit diameter: 200 mm Cross head: 4-spindle (drilling, milling) Lock case aggregate: 2-spindle WoodWop window/entrance door software 17-inch TFT screen Chip conveyor belt Documentation and control texts

Condition: good (used), Unit carrier, clamping plate, travel table, for modular units, format processing unit, chipping unit, milling unit, profile milling unit, jointing milling unit, cross-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy guidance -laterally movable Kjdpfx Ajb Uhpcjfijnc -with counter -Table height: 275 mm -Table surface: 3575 x 295 mm -Table thickness: 20 mm -Price: per piece -Quantity: 1x available -Dimensions: 3575/295/H275 mm -Weight: 356 kg

Year of construction: 1997, condition: ready for operation (used), A Homag horizontal panel saw is available. Saw blade outer diameter: 300mm, saw blade inner diameter: 75mm, speed: 4550rpm, scoring saw blade outer diameter: 125mm, scoring saw blade inner diameter: 45mm, speed: 5100rpm, cutting height: 50mm, cutting width: 1250mm/2200mm, workpiece length: 3200mm. Total system dimensions X/Y/Z: approx. 4700mm/5000mm/2000mm, machine weight: approx. 3500kg. Including saw blades and various spare parts. Documentation available. On-site inspection is possible. Kodpfowxxvusx Afijnc

Condition: used, Year of construction: 1999, table length: 7,900 mm, rotational speed (min.): 18,000 rpm, Dimensions 9400x3300x2300 mm Weight approx. 12,000 kg Kodpfxeua Ap Ro Afijnc Cone HSK63

Condition: used, machine/vehicle number: 007956, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/11/A3/WZ14 Position 2: Single Edgebanders HOMAG-PROFI KFL 350/11/A3/WZ14 Knodpfx Afowuudmjisc Position 3: Panel Return Systems HOMAG-PROFI KFL 350/11/A3/WZ14

Condition: like new (used), Year of construction: 2018, - as good as new (freshly provided with Homag service) - incl. cutting profit Kjdpstyam Nefx Afijnc - incl. extraction - with label printer

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Knodeiztxyopfx Afisc Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: good (used), Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 3 milling units and 2 buffing units from the BRANDT KS 25 edge banding machine -Buffing units: Motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling Knsdogyg Akjpfx Afisc -Milling units: Motor Perske / Homag, see photos on nameplates -Voltage: 220 V / 200 Hz -Price / fee: complete -Dimension total. 1200/800 / H590 mm -Total weight: 243 kg

Condition: ready for operation (used), Year of construction: 2004, Travel Z: 535mm, travel speed X/Y/Z: 60m/60m/30m/min, max. workpiece dimensions X/Y/Z: 4175mm/1730mm/300mm. Main spindle: power: 18.5kW, speed: 24000rpm, max. tool diameter: 200mm, max. tool length: 200mm, max. tool weight: 6kg. Drill diameter: 35mm, speed: 6000rpm, power: 4kW, projection stroke: 50mm, swivel: 100°, cross-cut saw diameter: 180mm, number of spindles: 4, vacuum pump capacity: 100m³/h. Documentation available. On-site inspection is possible. Knodpewmqw Hefx Afioc

Condition: good (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Numerical Control Power Control 22, Software WoodCommander (Windows) Safety and sound-proof enclosure No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 155 Max. useful working width (mm) 2500 Min. useful working tickness (mm) 12 Max. useful working tickness (mm) 60 Knodsdh Tfkopfx Afijc Max. depth of the panel for automatic infeed (mm) 1200 Distance between center-axes of the disappearing dogs (mm) 500 Adjustable (min/max) feeding speed (m/min) 10 - 30 No. 4 Working groups (for each machine's side): 1 Vertical milling Unit (Anti-chipping) 1 x Kw 4,5 2 Hogging Units (KD 11) 2 x Kw 6,6 1 Fine trimming unit (0°-25°) 2 x Kw 0,4

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Knedpfeifnxxox Afiec Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush Knjdpfxott Dqpj Afioc W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Knsdpfx Afelikydjioc Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Kodjd Nt N Ujpfx Afionc Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Knjdjdg Itnjpfx Afiec Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: excellent (used), LINE of Double-side SIZING-SQUARING and EDGE BANDING, max working width mm 2500 Composed of the following machines: U06051) Motorized rollers Table "HOMAG" Mod. TBL 100/25/12/S to infeed workpieces/panels U06052) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. Profi KFL 525/8/A3/15 Knjdodg Itmspfx Afisc U06053) In-feeding Rollerway "HOMAG" Mod. Profi TDL 310/25/12 with 90° Turning device (from lenghtwise direction to crosswise direction) with double cone system U06054) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. Profi KFL 526/9/A3/25

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Knedpfx Aed Nt Nqsfioc Numerical Control Power Control 22 Feeding speed m/min 18 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) QA 34 + PU 34 Band Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Pneu (2 pos.) Rough Trimming unit Optimat (2 x Kw 0,55) Multi Function Unit (Profile contour Trimming unit) FK 13 (2 x Kw 0,4) CNC (revolver 8+8 pos.) Profile edge scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit ( Glue scraper + Buffing unit) FA 11 (Pneu) OPTIONAL: Panels Return System "LIGMATECH" Mod. ZHR 05/L/075 (SOFIT code Z02007)

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Knodedt Rgvopfx Afijc VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" Knsdpfecr U Urjx Afijc And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Knedpfxsd Siyds Afiec Total installed motor power Kw 3

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 Kodpfefd Ilyjx Afionc - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels