Used Homag Table for sale (480)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 0-200-95-6633, functionality: fully functional, input voltage: 400 V, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Number of units: 6 1. Unit: Pre-milling unit Manufacturer: Nordson Tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers Tools available 4. Unit: Rough milling unit 5. Unit: Cutting unit 6. Unit: Fine milling unit MACHINE DETAILS Voltage: 400 V Current consumption: 41 A Fuse rating: 50 A Transport packages: 5 Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Unladen weight: 3,500 kg EQUIPMENT Nordson unit, year of manufacture 2017 Iodpjz Eazyjfx Ahyeih CE marking

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y Iiedpfxozzxzms Ahyjh * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. Iisdpfxez D U A Ae Ahyjh For further information about the machine, please see the images or feel free to request it.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function Iedpez Ikq Dsfx Ahysih GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Iedpfxex Ey H Io Ahyoih

Condition: good (used), Homag BMG 316 L machining center Working area: 4200 x 1550 mm 8 crossbars, each 1340 mm long 6 loading supports 8 front stops 5 rear stops in the machine base 4 side stops Suction cups: 160 x 155 h 100 mm Suction cups: 125 x 70 h 100 mm Iedpfx Ahsz R Dm Esyeih LED positioning system for workpieces and suction cups Electro-spindle, 5-axis, 10 kW, 13.5 hp, HSK F63 Liquid cooling Circular tool changer with 18 positions Drilling head with 17 vertical spindles, 7500 rpm 4 horizontal spindles with 125 mm blade, adjustable 0/90° Chip conveyor Tool transfer pick-up Collision control system CAD/CAM interface 2 Busch Mink MM 1144 BV vacuum pumps, 80 m³/h

Condition: used, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Year of manufacture: 2013 Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit Iiedpsyrp Uaefx Ahyeh - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2015, machine/vehicle number: 0-250-10-2402, functionality: fully functional, operating hours: 50,000 h, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Refurbished machining center. No.: 0-250-10-2402 TECHNICAL DATA: PERMANENTLY INTEGRATED FUNCTIONS: ▪️ V21/32 MM HIGHSPEED 7500 drilling head ▪️ Unit for making keyway grooves ▪️ H6X drilling unit ▪️ H4Y drilling unit ▪️ Tool changing spindle 10/12 KW HSK 63 (S1/S6-50%) ▪️ Drilling unit and milling unit on separate Z axes ▪️ Flange with unit connection ▪️ Tool magazine at the rear with 8 positions ▪️ Two-position magazine for unit feeding MACHINE OPERATION ▪️ WOODWOP for the machine ▪️ WOODWOP DXF IMPORT BASIC ▪️ 3D simulation for the CNC machine ▪️ Laser positioning for beams and suction cups DIMENSIONS OF WORKPIECES ▪️ Length of workpiece X, single processing – length M: 3250 ▪️ Width of workpiece Y, single processing – width M: 1400 DOCUMENTATION ▪️ Selected languages: English ▪️ Format: Data storage medium + paper documentation Iisdjzu Nq Sopfx Ahyjh GENERAL INFORMATION ▪️ Control system: POWERCONTROL control with POWERTOUCH system ▪️ CE marking: YES ▪️ Operating status: Ready for operation ▪️ Year of manufacture: 2015

Condition: used, Year of construction: 2022, operating hours: 540 h, Okleiniarka wąskich płaszczyzn + + stacja XES200 Producent: HOMAG Typ: EDGETEQ S-500 KAL375 AT Iodpfx Aszkmqzjhyjih Rok 2022 + stacja XES200 przeznaczoną do obsługi systemu klejowego PUR zastosowanie technologii airTec Sterowanie: HOMAG powerControl PC23 z ekranem powerTouch Wyposażenie: agregat wstępnego frezowania, jednostka klejowa technologia airTec agregaty obcinające agregaty frezujące, agregaty zaokrąglające cykliny polerki Dodatkowe wyposażenie: stacja serwisowa HOMAG XES 200. only 540 working hours!!

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Iiedpoiztxysfx Ahysh Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Iiedpfx Aez Ekfvjhyeh Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Isdpfx Ahszq Ab Noysih Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" Iiedjh T Dvtopfx Ahysh KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Iijdpfx Aeytgn Tohyeh

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Iiodpfxeqvnl Te Ahyjh

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Isdpozuykcefx Ahyoih Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2001, functionality: fully functional, double-head cutter with pre-scoring, chipping, 4 milling cutters, and edge finishing belt for both the right and left sides. Maximum working width: 2500 mm. Iedpfx Ahjy U Inxoyeih

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Iijdpfezzwhfex Ahysh Technical Specification Feed Speed 11 m/min

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-17-5078, PERMANENTLY INTEGRATED FUNCTIONS: 6 grippers 4 tables Right-hand machine Scoring saw motor power: 1.5 kW Isdpfxsyg I Tds Ahysih Saw blade projection: 80 mm Saw carriage speed: 130 m/min Main saw motor power: 11 kW Cutting line: 4300 mm Machine table in cutting line with air cushion Infinitely variable pressure beam control Labeling software MACHINE CONTROL: Control panel CADMATIC 5 ADDITIONAL INFORMATION: Data transfer via WLAN-USB Label printer

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Ijdpfxezvmx Ao Ahyoih Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Year of construction: 2014, Modell: Brandt Optimat KDF 430 C Production year: 2014 Feed speed: 11m/min Workpiece thickness: 8-60mm. Edge thickness: 0,4-8mm. Premilling unit: Yes Iijdpfx Ajzkd Nzehysh Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Profile/Glue srapper: Yes Buffing unit: Yes

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Iedpfx Ahezuyhusyoih Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Technical data Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Iiodpoz N Swiefx Ahyeh Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2018, Belt sander manufactured in 2018. This HOMAG SANDTEQ W-100 features a robust design suitable for various sanding applications. It operates on a supply voltage of 400Y/230 V and is equipped with a 3-phase power system. If you are looking to get high-quality sanding capabilities, consider the HOMAG SANDTEQ W-100 machine we have for sale. Contact us for further details. Iiodpfx Ahsz D Htmoyoh - Supply Voltage: 400Y/230 V- Phase: 3 Phase- Frequency: 50 Hz- Maximum Operating Full Load Current: 35 A- Fuse: 50 A- Control Voltage: 24 V- Control Unit Brand/Model: HOMAG Easy Touch

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Ijdpfx Ahezuw Dteyoih Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Max. speed 18,000-24,000 rpm (depending on configuration) Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Compressed air requirement 7 bar Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm CE marking