Used Homag Panel Saw for sale (478)

Condition: refurbished (used), Year of construction: 2024, Several used and fully overhauled Homag glue application units. All units are function-tested. - left hand side version - 1 unit as right hand side version available - QA 34 (QA65) - with or without new Teflon-coating (PTFE) Itedpfjtnh D Eex Afijn - all wear and tear parts (bearings, seals, etc.) are new.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Line of two Homag edgebanders KAL 310/09/A20 and 330/09/A20/WZ 90KW with return system. Machine in excellent condition. Can be inspected in department 14. Dismantling, loading, and transport at the buyer's expense. Itsdjw A R R Ejpfx Afien

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Position 2: bordatriceLottoUno HOMAG-PROFI KAL330/7/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ Isdpjwuuf Rsfx Afietn

Condition: used, Year of construction: 2000, functionality: fully functional, Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Iedpsuggpzsfx Afiotn Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0-201-22-4204, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,150 mm, workpiece height (max.): 80 mm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 1,000 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle with C axis Iodpfjxdxg Iex Afiotn

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Ijdpfsw Dc Nijx Afietn Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Overall height: 3.75 m (to top edge of crane) Itsdpfx Asxdx Apofion Stacking height: max. 2.5 m The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0.

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Itsdsxc Ir Ropfx Afisn

Condition: used, machine/vehicle number: 005983, Position 1: Double Squaring Machines HOMAG-NFL 25/4/10 Isdpfx Afewuucveijtn Position 2: Roller Conveyors HOMAG-NFL 25/4/10 Position 3: Double Squaring Machines HOMAG-NFL 25/4/10

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A Itodpsxczmzsfx Afien - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: good (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0-201-22-4227, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 30 m/min, workpiece length (max.): 4,800 mm, workpiece height (max.): 80 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 18, Equipment: rotational speed infinitely variable, Main spindle equipped with C axis and extension for Flex 5 aggregate. Working area X: 4800 mm. Working area Y: 1300 mm. Working area Z: 80 mm. 8 consoles. 1 vacuum pump. 18-position travelling tool changer. Tool holder HSK 63. Adapter - horizontal boring head with 4 fixed spindles. Boring head with 17 spindles. Additional spindle with collet chuck. Measuring probe. Central automatic oil lubrication. Lifting rails for console table. Itjdexdxa Ijpfx Afijn

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Comprising: Iedpfx Aoqi Hqijfistn - Feeding table Profi TBL100/20/06 (HOMAG, year 2014) - Profiling machine KAL310/7/A3 (HOMAG, year 2014) The KAL is suitable for processing coated wood materials: - with melamine edges 0.3-0.4mm - with ABS and PP edges 1.0-2.0mm (available tools R 1.0, 1.5, 2.0) Additionally equipped with a grooving unit for vertical and horizontal grooving and rebating. If interested, the complete order confirmation can be provided. The machine must be dismantled and loaded by the purchaser.

Condition: used, machine/vehicle number: 007577, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 210 AMBITION 2264 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 210 AMBITION 2264 Itsdowuugzspfx Afien

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Itsdowucknopfx Afisn Max feed speed: 60 m/min Operating Units: 3 nr

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Itjdpfx Aswuuc Aefijn Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 007906, Type of edging: Thin edge, Thick edge, Solid wood Iedpswucm Ajfx Afijtn Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 32 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, machine/vehicle number: 007998, Max. panel width: 1850 mm Max. panel length: 2700 mm Ijdjw Idacspfx Afijtn

Condition: used, machine/vehicle number: 006064, Squaring: First and Second Pass Max Panel Thickness: 85 mm Max feed speed: 26 m/min Itsdpfxolw A D Tj Afien Distance between dogs: 1000 mm

Condition: used, machine/vehicle number: 008105, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Iodpew Idgpsfx Afietn Operating Units: 9 nr

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Itjdsrl Utbepfx Afijn Trimming Unit: yes Max Panel Length: 55 mm

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Isdpfxjvctlgo Afiotn Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 008124, Position 1: Double Sided Squaring/Edgebanding Machines HOMAG-KF 26/9/PU/30 undefinedPosition 3: Panel Stacking and Offloading HOMAG-KF 26/9/PU/30 Isdpfxsw Idg Ao Afistn

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1500 mm Working Table: Pod and Rail Ijdpfoxaud Iox Afijtn Number of controlled axes: 4 axes

Condition: used, machine/vehicle number: 007826, X axis working area: 5600 mm Itedpfx Afswgkt Uoien Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 17 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008107, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 310/9/A20/S2 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 310/9/A20/S2 Itjdpjw U Rqzjfx Afion