Kappaggregat

Homag 4,4kW 2860U/min

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Cutting height under the blade 160mm / possibility of adjustment Width of cut on the feed wheel max. 900mm. 1 pc. moving head with laser adjustment. Kdedpfxoxxgy Se Ah Nog Diameter of main saw blade 300 - 500mm. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing Kjdpfxsd A Ttxe Ah Nodg - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: Kodpsw Dp Ufofx Ah Nsdg - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Kodpfx Ahofxpbmj Nodg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Kdodpfsxawddex Ah Neg Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Year of construction: 2022, operating hours: 500 h, condition: like new (used), functionality: fully functional, Vertical frame saw PRP-58W PRP-58W saws logs of any length and diameter up to 430 mm. The horizontal frame clearance of 580 mm allows you to cut even very thick logs in the case of previous, single or double-sided cutting on a band saw. The saw uses many technical innovations, including: dynamic tensioning of the blades, a special openwork design of the saws, a device for inserting short logs (meters), and a set for their quick feeding. The design of the feeder trolleys has also been completely changed compared to traditional ones. They can be used with minimal changeover for both long and short wood. In addition to the function of a traditional sawmill, the PRP-58W successfully perform the role of a multi-rip saw, a circular sawmill for a "pallet saw", and in all applications it is characterized by a very small kerf. Technical data of PRP-58 W Horizontal clearance of the saw frame 580 mm Vertical clearance between rollers 430 mm Saw frame stroke 300 mm Main shaft speed 330 rpm Working feed 0.5 - 2.5 m/min Blade dimensions 915 x 70 x 2,0 mm Maximum number of saws 10 pcs. Main motor 18,5 kW/400 V Feed motor 0,75kW/400V Hydraulic Pump Motor 0,75kW/400V Minimum length of the sawn logs 1,8m Minimum wiping length with special equipment 1.2 m Minimum thickness of the sawing (board) 13 mm Log sawing height over ground 880 mm Track height above ground 600 mm Kedpfow H Nyyox Ah Njdg Overall dimensions of the saw 1.20 x 1.70 x H 2.20 m Total length of the assembly with the track 10.00 m Weight with standard equipment 3600 kg Including full equipment, both wagons for round timber and roller conveyors for blocks. Grinder many carbide tipped sawblades 12 m infeed and 12 m outfeed. (Possible to easily be shortened) Located in Southern Sweden. Please call directly to Fredrik Andersson +46707175853

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Kdsdpfjw Nrhkex Ah Nog

Year of construction: 1995, condition: excellent (used), 2 grinding aggregates with 22kW motors each Cleaning brush Kdodpfshxvi Eex Ah Nog Smooth feed regulation Vacuum suction of the workpiece Powered receiving roller table

Condition: ready for operation (used), Year of construction: 1978, The machine is in perfect working condition. Demonstration on site or live video in action is possible. Kdsdpfx Ahov Uaanj Nog

Condition: excellent (used), Cross-country trac/multi-saw receiver Rollers width 1160mm Number of drawing rollers 14 Distance between rollers 550mm Kedstrq S Hjpfx Ah Nsdg Drop chains with takers 4pcs Longest element 820cm Use behind a sawmill or a multi-saw