Used Homag Bof for sale (474)

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Fodpfxeyqybue Aa Eopd Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Fpodpfx Aajyqx U Hs Eed Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: used, machine/vehicle number: 006376, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 10000 mm Panel return for edgebander: Left Fpsdpfxjyqxypj Aa Eod

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Fpsdpoytgn Tofx Aa Esd

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, input voltage: 415 V, Equipment: CE marking, documentation/manual, Homag BHX 055 Cnc router boring machine centre Fjdpoytfkmofx Aa Eopd

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Fedpfoypm Hhsx Aa Espd Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE

Condition: excellent (used), Year of construction: 2019, Specification 2 tanks Fpjdpeypm Dgjfx Aa Eed 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Fpodpoypm Avofx Aa Ejd Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 1,350 h, HOMAG OPTIMAT BHX 200 Fpodsyr Rakjpfx Aa Esd Excellent condition. Low operating hours. Two drilling units for simultaneous line boring. 5 slots for milling cutters.

Condition: ready for operation (used), Year of construction: 1998, Homag Processing Center Genius BAZ20/30/14/D Electronically controlled milling and edge-banding machine, post-processing, and drilling center designed for batch production of furniture parts, solid wood, or similar materials. Base Machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Aggregate carrier with linear guide system, ball screw, and digital AC servo motor for Z-axis positioning, travel distance 340 mm - Automatic central lubrication for all drives and linear guides - Designed for the attachment of various table configurations Control System: Wood Wop 5.0 - Enlarged Z-axis travel, 500 mm - Extended safety step mat - Manual through-feed table B20/30+40/…/D - Motorized width adjustment of the longitudinal console D-table - Chip conveyor belt for B../30+40/K - Stop pins for laminate overhang - Main spindle, 12 kW - Chain tool changer, 70 positions for B20, for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface 220/24 volt - Edge gluing aggregate, 4 sides for main spindle - Melting unit with granulate container - External automatic triple edge changer - Rack changer system for aggregates and tools - Rabbet pressure zone for main spindle - Flush trimming unit for tool changer - Saw and crosscut unit for tool changer - Boring/milling unit with 4 spindles for tool changer Fodpfx Aox Nrk Hsa Eopd - Lock case milling unit for rotary magazine - Vertical milling unit with tracing ring - Sanding unit with air blast nozzle - CNC programming system Wood-Wop - Post-processor for BAZ - Free-standing control panel Location: Ex works, customer site - Immediately available - Machine must be dismantled by the buyer.

Condition: used, Year of construction: 2018, max. workpiece length 4200 mm profile spindle 1 Stück main drive 15 kW HOMAG CNC Machining Center BMG310/42/F/K, Year of Manufacture 2018 ----- This machine is part of the sale of a complete window manufacturing business, see stock number 1305-6979. Machines still connected and ready for demonstration Fodeyn R Iajpfx Aa Espd Technical specifications: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lift rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows For a detailed description, please see the attached PDF document! ----- Price: on request! Options with additional costs: ----- - Used Leitz tools for Homag with curved tooling, compatible with SCM Windor 40 R systems #1305-6993. Price: 12.000 Euro - Barbaric vacuum lifter, manufactured in 2015. Price: 4.500 Euro - used Löwer MZP 1 mini fingerjointing press for arched windows Price: 1.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Homag EDGETEQ S-380 - Optimat KDF 660 SC Max. edge bonding thickness: 12 mm Max. workpiece thickness: 60 mm Max. thickness of rolled material: 3 mm Min. workpiece width: 70 mm Suitable for PUR glue PUR melting unit Strip/edge magazine Joint milling unit NC-controlled pressure zone Cut-off saw unit (cut to length) Trimming/radius/chamfer stations Corner copying unit Profile scraper, flat scraper Polishing unit (brushing) Fpsdpfx Aajx Itb Ro Ejd

Condition: like new (used), Year of construction: 2019, used vertical CNC machining center Manufacturer: Homag Model: Drillteq V-500 Edition25 Main operating hours: approx. 1,800 hours Working range X: 200 – 3,050 mm Working range Y: 70 – 850 mm Working range Z: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 15 pcs Horizontal drilling spindles in X: 6 pcs Horizontal drilling spindles in Y: 4 pcs Grooving saw, swiveling 90° Grooving/milling unit for Clamex-P Dowel insertion stations (white glue) Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet chuck Workpiece length: 3,050 mm Workpiece width: 50 – 1,250 mm Workpiece thickness: 8 – 80 mm; max. 60 kg weight CONTROL: POWERCONTROL PC86 power touch with FullHD multitouch display 21.5″, operating system Windows 10 Network connection, Tapio ready, fully prepared WoodWop 7.0 incl. MDC and production list software Fpsdpfoymz Rvjx Aa Eod Basic barcode reading system Delivery includes only all tools and HSK holders shown in the photos!

Condition: like new (used), Year of construction: 2021, Used CNC machining center Manufacturer: Homag Model: Drillteq V-200 (Optimat BHX 055) Year of manufacture: 2021 X-axis working range: 200 – 3050 mm Y-axis working range: 70 – 850 mm Z-axis working range: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 13 pcs. Horizontal drilling spindles in X: 4 pcs. Horizontal drilling spindles in Y: 2 pcs. Grooving saw in X direction Fpodpsymzkvofx Aa Esd Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet Max. workpiece length: 3050 mm Workpiece width: 70 – 850 mm Workpiece thickness: 8 – 56 mm; max. weight: 35 kg POWERCONTROL PC86 power touch control unit with Full HD multi-touch 24″ display, operating system Windows 10 Network connection, Tapio-ready prepared WoodWop 7.0 including MDE and production list software BASIC barcode reading system Delivery exclusively includes all tools and HSK holders shown!

Condition: good (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, Equipment: CE marking, documentation/manual, HOMAG Optimat BAZ 722/42/16/K Gantry CNC machine with 2 shuttle tables Options included: Vacuum pumps 2pcs Parts positioning laser. Vacuum pads Fsdpfxjyq Nkrs Aa Eopd Scrap parts transporter

Condition: used, Year of construction: 2000, functionality: fully functional, NEW PRICE! Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Fpsdpfouggpzjx Aa Esd Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 4000 mm Working area Y: 1600 mm Fedpfeyprr Nsx Aa Espd C-axis electrospindle, power 11 kW, HSK 63F interface Vertical drilling heads: 17 Horizontal drilling head with cross position + blade Milling and end-processing unit 360° gluing unit Combined edge trimming/scraper unit Edge band magazine with 2 positions 12-position rotary magazine Control: Power Control PC 85 WoodWop7.1 (update in 2018, paid approx. €9,500) Worktable with 8 beams and suction cups Elmo Rietschle vacuum pump Safety mats Chip conveyer belt

Condition: used, Year of construction: 2011, max. workpiece length 6000 mm profile spindle 2 Stück main drive 18,5 kW Very well-maintained Homag Profi BMB 922/35/13/B CNC machining center with automatic loading and unloading For machining timber for windows, frame doors, or similar workpieces made of wood or wood-based materials. Detailed description in the accompanying PDF file! HIGHLIGHTS: ----- - Workpiece length up to 6000 mm (with regripping); Workpiece width up to 300 mm for machining individual parts, door leaves up to 1,300 mm on additional crossbeams, workpiece thickness up to 150 mm - Automatic loading and unloading of individual parts, buffer with 2 m depth - Automatic positioning of collets, automatic reclamping Interior/exterior profiling - 2 x 4-axis high-performance spindles with HSK 63 F taper with C-axis - C-axis extension for Flex5+ unit - Fixed drilling head with 13 spindles V9/H4: with 9 individually selectable vertical drilling spindles and 2 horizontal drilling spindles with dual output, 1 in the X direction and 1 in the Y direction - 18-position disc tool changer - 72-position chain tool changer - Additional console table for machining special forms and arches including various vacuum clamps and PowerClamp clamping system for the additional console table. With Lasersystem "Mr. Beam" - Vacuum pump - Chip conveyor belt - Including interchangeable units (saw unit, lock case unit, dowel drilling unit 3 + 1, drilling and milling unit 4 spindles, FLEX 5 unit) - OPTIONAL window tools: • Wooden windows IV 67/77/89 – Year 2011 Fpjdpfx Aeymf Eqja Ejd • Front door IV 67/77/89 – Year 2011 • Lift-and-slide windows IV 67/77/89 – Year 2011 • Wood-aluminum windows 67/77 – Year 2018 • Wood-aluminum front door 67/77 – Year 2018 Machine in operation until approximately October 2026 and available for viewing! Detailed technical description, window cross-sections, and prices available upon request! aktuelles Video siehe nebenstehend/current video of the machine attached: Sequenzen Video: Minute 0:00 - 2:08: komplette Maschinenansicht_compplete machine view Minute 2:08 - 12:21: Fensterfertitung gerade Teile_window production straigth elements Minute 12:21 - 14:45: Sonderfensterproduktion Zusatztisch_special window production on additonal table (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal - Includes existing Leitz planing and beading tools - Linked to a Maweg Saturn Duo single-slice wood sander, year of manufacture 1985 and a workpiece return conveyor Item 2: SCM Windor 40 R window system, year of manufacture 2006 Fsdpfxeyclwxo Aa Eepd ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom drilling units - Rebating carriage for small sashes - Workpiece return - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window...

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0002517 - Manufacturer Code: 4-008-61-0284 - Condition: As new (ex-demo/display item) - Functionality: Fully operational - Compatible Machine: - If interested, we offer a refurbishing service; please contact us. 1KG 20X20X20 Fpodoymfldjpfx Aa Ejd

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003529 - Manufacturer Code: 2-083-01-5513 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 1KG 20X20X20 Fpedpfeymfk Tox Aa Eed

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003528 - Manufacturer Code: 2-083-01-5516 - Condition: As new (ex-display item) - Functionality: Fully operational - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG - 20X20X20 Fpodpeymfivefx Aa Esd

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003525 - Manufacturer Code: 1-003-65-5353 - Condition: Like new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer overhaul service, please contact us. 7KG - 46X39X27 Fedsymfghjpfx Aa Espd

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003497 - Manufacturer Code: 2-083-01-0116 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service. Please contact us. Fpjdpfsymd Udex Aa Esd

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0001621 - Manufacturer Code: 2-083-01-5086 - Condition: As new (ex-demo item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer a refurbishment service. Please contact us. 1KG 20X20X20 Fjdpjymd I Rofx Aa Ejpd