Used High Frequency Press for sale (32,728)

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Itjdpohtnniefx Ahvod dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: B2.01127.1899, Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 650 bar Delivery rate: 72 l/min. Drive speed: 1500 rpm. Driving power: 87 kW with EMK KAE2G280M-4B3E3K electric motor 90 kW, IP55, IE3 with pressure control valve, Itedpfxsix I H Us Ahved with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x850x1.350 mm weight: approx. 1.200 kg Year of manufacture: 2012 Condition: In very good used condition.

Year of construction: 2018, condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Working pressure: 610 bar Delivery rate: 78 l/min. Drive speed: 1500 rpm. Itedpfxsh E Dgzo Ahvod Driving power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x850x1.450 mm Weight: approx. 1.200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020 run only a few weeks and out of service for more than a year. In very good used condition.

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Itodpfonp Iywsx Ahvod good working condition

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages Ijdpfx Ahexlkvdjvjtd - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Year of construction: 2011, condition: like new (used), Offer on request 2 pieces available Motor power: 3 KW Voltage: 400 V Isdpfx Ahodtyx Ejvjtd Maximum capacity: 40 LM Pressure: 20 Bar Tank capacity: 980 Lt. Weight: 900 kg with cooling system EUROCHILLER GC-B A 009 SP - year 2011 400 V 50 HZ 6 Kw 9 A 24 Vaux 500 VI 54 IP R407c gas Air condenser: 25°C Water process: 15°C Weight: 4 kg

Condition: new, Year of construction: 2024, operating pressure: 250 bar, total length: 878 mm, high-pressure hose length: 10,000 mm, total height: 702 mm, total width: 538 mm, empty load weight: 57 kg, fuel: super 95, warranty duration: 24 months, We offer for sale the HD 9/25 G Classic petrol-powered high-pressure washer. Condition: New Year of manufacture: 2024 Technical specifications: - Pump performance (l/h): 900 Ijdpfsx At R Esx Ahvotd - Working pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: petrol - Engine type: G390FA - High mobility - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: - Standard spray gun - 10 m high-pressure hose - Crankshaft pump with ceramic pistons - Power nozzle - Protection frame - Water filter Features: Independence - No reliance on external power sources. - Compliant with EU STAGE V emission standards. - Convenient manual start. High mobility - Puncture-proof wheels. - Compact and easy to manoeuvre in confined areas. - Fits inside a vehicle. Robust and durable design - Sturdy tubular frame protects the pump from damage. - High-pressure pump equipped with a safety valve and water filter. - Crankshaft pump with ceramic pistons. Accessory storage - Holder for power leads and accessory compartment for easy storage and transport. - Ergonomic handle and convenient hose storage. The HD 9/25 G Classic cold-water high-pressure cleaner, with a working pressure of up to 250 bar, a delivery rate of 900 litres per hour, and a durable crankshaft pump, is designed to handle even the most demanding cleaning tasks. Its high-performance EU STAGE V petrol engine eliminates the need for external power sources. Sturdy tubular steel frame and puncture-proof tyres make it ideal for challenging tasks on construction sites, in industry, municipal areas, or service companies in the construction sector. The ergonomic handle, very compact dimensions, and dedicated accessory holders (e.g., for high-pressure hose and lance) simplify operation and allow for easy transport by vehicle. All major components are easily accessible for servicing and are effectively protected by thermal and safety valves. Please note: The machine does not support suction from alternative water sources.

Condition: like new (used), Year of construction: 2025, operating hours: 250 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Year: 09/2025 2800 BAR Ijdpjvgrpxofx Ahvotd Manufacturer's warranty Engine: DEUTZ TCD 6.1 ST5, 140 kW Available immediately

Condition: new, Year of construction: 2020, A new high-pressure pump from Andritz Ritz GmbH is offered. Year of manufacture 2020. Technical details: see nameplate. Ijdsvu T A Nepfx Ahvotd

Condition: used, Year of construction: 2007, operating hours: 5,573 h, functionality: fully functional, operating pressure: 1,200 bar, power: 122 kW (165.87 HP), pump capacity: 40 l/min, Equipment: type plate available, FALCH type T12, year of manufacture 2007, machine output 122KW/1200BAR/40 litres per minute. The unit is fully functional, featuring a bypass modification from water to air and a refurbished external machine cover. Supplied with basic equipment: control gun with rotary nozzle, control cable, and 20m high-pressure hose. Itsdoxyx Evopfx Ahvjd

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW Itjdpfotuqmgox Ahvsd 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump Itodpfxstuqmkj Ahved

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min Itodpfx Ahotuqlxovsd 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Itjdpfxov S Ep As Ahvsd Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Year of construction: 2012, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 47 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 477 Working pressure: 300 bar Delivery rate: 24 l/min. Iodpfxoh Uc Nks Ahvjtd Drive speed: 1500 rpm. Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.100x750x1.200 mm Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption Itodpfxju Hz Tqe Ahvsd + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 40 kg, warranty duration: 24 months, input frequency: 230 Hz, SPECIFICATION: Model: KPC-3.5P Code: K8.011.0051 Voltage/Hz: 230/50 Pressure (Bar): 120/150 max Flow Rate (L/h): 660 Power (W): 3000 Motor: Induction RPM: 1450 Itodpfxow Iccij Ahvjd PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH INTEGRATED BYPASS VALVE 18 mm CERAMIC PISTONS STAINLESS STEEL INLET AND OUTLET VALVES INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS STOP&GO FUNCTION EQUIPPED WITH PROFESSIONAL ACCESSORIES FEATURING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR REMOVING ALL TYPES OF CONTAMINANTS AND SURFACES INCLUDES A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL BRAIDED HOSE Why choose a crankshaft pump with ceramic pistons? - The crankshaft pump is a solution renowned in industrial applications. Its robust design ensures a significantly longer service life compared to more affordable washers equipped with axial or rotary pumps. - Ceramic pistons offer exceptional resistance to high temperatures and wear, providing reliable and quiet operation for years. - Thanks to this construction, the unit can be used in continuous operation mode without the risk of overheating or excessive component wear.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 56 kg, warranty duration: 24 months, input frequency: 400 Hz, SPECIFICATION: Model: KPC-5.5TP Voltage/Hz: 400/50 Pressure (Bar): 200 Flow Rate (L/h): 900 Power (W): 7200 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, DIAMETER 18 mm STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS EQUIPPED WITH PROFESSIONAL ACCESSORIES, INCLUDING 4 NOZZLES OF DIFFERENT SPRAY ANGLES TO HANDLE ANY TYPE OF DIRT AND SURFACE FEATURES A PRACTICAL HOLDER FOR ACCESSORY STORAGE AND A PROFESSIONAL BRAIDED HOSE Advantages of a crankshaft pump with ceramic pistons: Isdpfxjw Ickae Ahvjtd - Precise operation and very high efficiency – these pumps are indispensable in environments where reliability over many hours of daily operation is crucial. - Minimal component wear – ceramic pistons are far more durable than steel ones, so they require less frequent servicing. - Resistance to chemicals and variable temperatures – they perform excellently even when working with aggressive chemicals and hot water. - Smoother operation – the pump runs more quietly and generates less vibration, improving operator comfort. Low-speed Motor – Professional design: - 1450 RPM ensures lower component wear and reduced noise emissions. - Designed for heavy-duty operations, ideal for tasks requiring continuous and extended use.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Ijdpfxow Icn Sj Ahvstd Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Ijdpjf Hly Sofx Ahvotd Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min Ijdpfxsxugife Ahvetd 32A plug Best regards, STS-Reinigungstechnik Team

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Itedpoxufbtefx Ahvod Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 126-3 High-pressure clamp Jaw width: 125 mm Jaw height: 40 mm Itodpexf U Ahsfx Ahvsd Opening width: 177 mm Clamping pressure: 2 / 3 / 4 tons Guide rail height: 62 mm - Clamping force adjustable in 3 stages - High-pressure clamp with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 103 mm Weight: 26 kg Good condition

Condition: good (used), Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand. Isdpfxsg Th S Ao Ahvotd Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device. High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA! capacity 500 m3/h

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Itodjr A Dm Ispfx Ahvjd Sugino high pressure plunger pump Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump