Used Helmet Profile for sale (5,407)

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm Pjdpfx Ahsb Uhuko Hegg -Weight: 712 kg

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge Pedpfxjb Uhrmj Ah Hsgg -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Pgedpjgylq Sjfx Ah Heg -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail curved, with clamp -Type: Width 105 mm -Length: 1600 mm Pgodowmq H Iepfx Ah Hjg -Dimensions: see photos -Quantity: 1x helmet rail available -Transport dimensions: 1600/473/H134 mm -Weight: 38 kg

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. Psdstp Twmjpfx Ah Hsgg We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a R-PRO 25 standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 Pgsdpfshpuhtjx Ah Hjg DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) - Ribbing Attachments (Optional) - Dijital Encoder (Optional) - Circular Saw (Optional) - Manual Guillotine Shear (Optional) - Sliding Shear (Optional) Please contact us for more information and prices...

Condition: good (used), functionality: fully functional, machine/vehicle number: 003128, empty load weight: 200 kg, Year of construction: 2003, Hello. I have a profile wrapping machine from Ruchser for sale. The machine is 100% operational and comes with roller tables. It is capable of simultaneous wrapping of the profile on three sides. If you have any questions, please contact me. Pgjdpfx Ahsx Tpgys Heg

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment Psdsxvbvvjpfx Ah Hogg - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm Pgsdocht Nyopfx Ah Hog over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock

Year of construction: 2006, condition: good (used), 3-axis / 5-side machining center with ISOLA soundproof cabin for aluminum, PVC, and steel profile bars. Comparable to Elumatec, Mecal, Fom, Pertici, etc. The machine features two machining zones and two tool magazines, which can be operated individually in pendulum mode or together for setups spanning the entire machining length (multi-part operation). The clamps can be positioned independently on the left and right relative to the machining head. Travel distances: X-axis: 7000 mm Y-axis: 300 mm (+113 mm from the movable worktable) Z-axis: 350 mm P-axis: 3500 mm (for left-side clamp positioning) H-axis: 3500 mm (for right-side clamp positioning) Pgedpox Dimxefx Ah Hjg 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per changer magazine/machining zone) Including: Camplus software 2 angle heads

Condition: good (used), Year of construction: 2009, Comparable to Elumatec, Mecal, Fom, Pertici, etc. Pedpexgpvrofx Ah Hegg Ideal for processing insect screen systems! For saw blade diameter 500 mm, cutting length 5000 mm. Double mitre saw with pneumatically outward swiveling heads, designed for cutting aluminium and PVC profiles. The right, movable saw unit positions itself automatically to the profile length entered in the control panel. Scope of delivery includes all necessary safety devices as well as vertical and horizontal clamping devices. Head Swiveling The heads are swiveled via pneumatic cylinders. Mitre cuts can be made from 90° to 22.5° outward. Intermediate mitre angles can be set manually using a stop device. The cutting area is equipped with automatically opening and closing safety covers. Profile support roller conveyor at the movable unit with clamping device Spray misting system with macro function A compatible extraction unit is also currently available as an option!

Condition: new, Machining center with 4 CNC-controlled axes For machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame made of robust welded construction, stress-relieved annealed, with hardened linear guides Protective cabin over the entire machining length Pneumatically operated safety door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication for tools, including fill level monitoring Tool magazine: 5 positions, left side in the machine bed, for accommodating drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm Automatic positioning via device on the Z axis Workpiece positioning: One pneumatic reference stop on each side (left and right) on the A axis Travel ranges: X axis 3500 mm Y axis 370 mm Z axis 348 mm A axis ±90° Travel speeds: X axis 70 m/min. Y axis 30 m/min. Z axis 30 m/min. A axis 60°/sec Maximum working areas: X axis 3270 mm Y axis 250 mm at 0°, 116 mm at ±90° of the A axis Z axis: 170 mm at 0°, 200 mm at ±90° of the A axis Psdpfx Ahjwrcwpe Hogg Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side processing by swiveling the A axis 90°-0°-90° End machining using disc cutter Operating modes: One profile bar over the entire machining length Two profile bars with split machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with fill level monitoring Operation: 18.5” touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivered without power cable Pneumatics: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Included: Graphical programming software CM3D/CAD3D Barcode reader Additional network connection including remote maintenance/diagnostics for 1 year

Year of construction: 2008, condition: excellent (used), functionality: fully functional, ❇️ elumatec SBZ 122 / 30 – CNC Machining Centre for Aluminium Profiles Very good condition | fully functional | well-maintained industrial machine ⸻ For sale is a high-quality CNC machining centre elumatec SBZ 122/30 from a window and façade construction company. The machine is in very good, well-maintained, and fully operational condition, and was productively used up to the end. It is ideally suited for efficient processing of aluminium, light metal, and thin-walled steel profiles in professional window, door, and façade construction. The machine was ordered at the end of 2007, delivered and commissioned in May 2008. Throughout its entire service life, it was operated by a single, highly conscientious employee, including all necessary work preparation. On-site inspection and functional testing are possible by appointment at any time. ⸻ ❇️ Machine • Manufacturer: elumatec • Model: SBZ 122 • Machine type: CNC machining centre for profile processing • Application: Window, door, and façade construction • Control system: elumatec CNC control with operator panel & keyboard • Axes: CNC-controlled multi-axis machining • Material processing: - Drilling - Milling - Thread cutting - Notching / profile processing ⸻ ❇️ Equipment & Highlights • CNC processing unit with automatic tool changer • Integrated roller conveyor / material support • Multi-beam safety light curtain SICK M4000 • Pneumatic clamping technology • Cooling and lubrication unit • Operator panel with monitor & keyboard • Foot switch • Heavy-duty industrial design – durable & precise • Ideal for series and single part production ⸻ ❇️ Condition & History • Very well-maintained overall condition • Technically fully functional • Maintenance and any necessary repairs carried out by Vincon (elumatec’s service and sales partner) • Use of original spare parts • Very low reject rate due to careful work preparation and operation • Minimal tool wear • No known technical defects ⸻ ❇️ Documentation & Accessories • Operating manual for SBZ 121/122 operating software (2 copies) • Operating manual for SBZ 122/20+30 • Tool list including recommended cutting data • CD-ROM for SICK M4000 multi-beam safety light curtain • Copy of the original invoice from 2008 with details of the delivery scope at that time ⸻ ❇️ Technical Data • External dimensions (L × W × H): approx. 7,000 × 2,200 × 2,600 mm (approximate, precise measurements upon inspection) • Weight: approx. 4,500 kg (estimated) ⸻ ❇️ Price €21,900 net plus 19% VAT Pgjdpfxjx Tfi Ro Ah Hog ⸻ ❇️ Terms & Conditions • Sale on behalf of the customer • Invoice with VAT shown separately • Location: 72229 Rohrdorf • Loading by overhead crane available on site • Delivery possible on arrangement and cost coverage • Collection preferred ⸻ ❇️ Inspection & Enquiries Available by phone or message – inspection explicitly recommended.

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget Pjdpsu Idnmjfx Ah Hjgg i.D. *

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V total power requirement: ca. 15,1 kW weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm Psdpjwh Rq Njfx Ah Hegg - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel accessories: - various bending rollers without profile *

Condition: new, Year of construction: 2025, Electric pipe bending machine without mandrel. Accurate and efficient machine for bending steel, copper, aluminum and brass pipes. The possibility of selecting the optimal bending radius allows for obtaining high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use. Standard equipment digital reading of bending angle The BENDMASTER 40A machine is equipped with dies for pipes with a diameter of: 16; 20; 25; 32; 38 mm Technical data MAXIMUM BENDING ANGLE 180° DIY ROTATIONAL SPEED WHEN BENDING 5 rpm MAIN MOTOR POWER 1.5 kW EXTERNAL DIMENSIONS OF THE DEVICE 720 x 500 x 1030 mm WEIGHT Pgsdpovugx Dofx Ah Hjg 330 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish Psdpfju Snlksx Ah Hegg CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: new, Year of construction: 2025, The sandblasting cabin is a device used in industry, car workshops and renovation works. It is used to remove surface layers from various materials, such as metal, wood or glass. The cabin has side openings and telescopic cylinders, which allows the processing of long workpieces. The standard equipment includes a dust extraction system, a set of nozzles, a gun and protective stickers for the visor. Thanks to it, you can effectively and precisely remove surface layers from various materials. Product characteristics: The 350 liter top opening sandblaster for KDP350TOPPLUS profiles is a specialized, reliable and professional tool that will ensure precise and effective cleaning and treatment of metal surfaces. Its advanced solutions and high quality make it one of the best products on the market, which will surely satisfy demanding customers and ensure failure-free and safe operation. The sandblaster is a device that has been specially designed to remove surface layers from various materials. Thanks to the side openings, it allows the processing of long workpieces, which allows for even greater versatility and flexibility in use. Telescopic cylinders are installed in the cabin door, which makes it easier to open and close, and thus increases the comfort of use. As standard, the cabin is equipped with a dust extraction system that protects against inhalation of harmful dust during operation. Thanks to this tool, work is safer and more comfortable. KDP350TOP PLUS technical parameters: WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm SIDE OPENING DIMENSIONS 200 x 180mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment DC15 cyclone exhaust Podpom Ncciofx Ah Hsgg Foot pedal to control airflow Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in English We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Pgedpju Snm Iefx Ah Heg Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: new, Year of construction: 2025, Accurate and efficient industrial bending machine for bending steel, copper, aluminum and brass pipes. The ability to select the optimal bending radius allows for high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use and guarantees ease of use. Standard equipment digital reading of the bending angle The BENDMASTER machine is equipped with dies for pipes with a diameter of: 38.1; 48.3; 70 mm Technical data MAXIMUM DIAMETER OF BENT PIPE 70x5 mm MAXIMUM DIMENSION OF BENT SQUARE PROFILE 50x50x2 mm MAXIMUM BENDING ANGLE 270° DIE ROTATIONAL SPEED DURING BENDING 1.2 rpm DIE ROTATIONAL SPEED DURING RETURN 2.4 rpm MAIN MOTOR POWER 5 kW EXTERNAL DIMENSIONS OF THE DEVICE 1300x700x900 mm WEIGHT 680 kg Pgodpsvugv Asfx Ah Heg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2017, 1 used hydraulic 5-station combined high-performance profile steel shear Technical Specifications: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm Ø 38 x 8 mm Throat depth: 175 mm Max. stroke: 50 mm Number of strokes: 20 / min Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tool size: 100 x 100 x 8 mm Flat Steel Shear Max. material width x thickness: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Mitre cut 45° (leg length x thickness): 80 x 10 mm Working height: 955 mm Bar Steel Shear Pedpfx Aoxz Dn Eeh Hegg Capacity round material: 30 mm Square material: 25 mm Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U/I-profile (accessory): 80 x 45 mm Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Motor power: 4 kW Machine dimensions: approx. 1500 x 950 x 1680 mm Machine weight: approx. 1400 kg Accessories / Special Features: • Punching station, flat steel shear, angle steel shear, profile steel shear, notching station • Stepless stroke adjustment • Heavy-duty and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangle notching station / V-notch tool • With MUBEA holder for punch No. 1, No. 2 and No. 3 as well as die No. 30, No. 45 and No. 60; use of punch and die No. 4 and No. 80 possible as option • Punch holder with bayonet coupling • Advantages of punching over drilling: - Significant time savings – short cycle times - No chips - No coolant required • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve, helmet rail branch -Manufacturer: Helmet, branch for helmet rail -Type: Width 65 mm -Dimensions: see photos Pgsdjwx E Dxepfx Ah Hjg -Number: 1x branch available -Transport dimensions: 960/390/H90 mm -Weight: 9.9 kg

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, functionality: fully functional, overall weight: 130 kg, height adjustment type: mechanical, input voltage: 230 V, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Profile and strip sanding machine S 220 Year of manufacture 2018 With stop rail With extraction nozzle Machine is available immediately Podpswa Nmgsfx Ah Hjgg

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Pjdpfx Ahjmig D Dj Hegg

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Pgsdpsv Ucbnsfx Ah Hog Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional