Used Heavy Duty Shelf for sale (6,253)

Condition: good (used), Year of construction: 2019, Pallet Racking, Nedcon, Height 2.50 – 2.70m, Beam Lengths 3m and 4m, 500kg per pallet, max. 5,600 pallet positions, - used - : Nsdsw D Ewvspfx Amyjcw Price ex location: only €65,000 (net), dismantled, packed, and loaded, for full purchase including numerous short beams and both short and long end-of-aisle protectors / guard rails (for double and single runs)! Price for partial quantities: Frames: €45 each Beams: 2m: €14 each 3m: €18 each 4m: €22 each Manufacturer: Nedcon Type: Pallet Racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500kg Number of frames: approx. 900 units Most frames are equipped with upright protectors Frame height: 2.50m and 2.70m Frame depth: approx. 1.10m Beam lengths: 4m min. 624 units (beam height e.g. 12.5cm / support approx. 5cm) 3m min. 518 units (beam height e.g. 8.5cm / support approx. 4cm) Some 1m and 2m also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Condition: used, total length: 10,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, frame width: 900 mm, This package includes: 4 x uprights, 4m high x 90cm deep 12 x crossbeams, 330cm each including accessories and grating Results in a single row with 3 bays and 2 levels per bay, total length approximately 10300cm 400m available immediately! Manufacturer: Galler Type: Wide-span shelving Condition: used, good Height: 4 m Length: approx. 1 x 10.30 running meters Frame depth: 0.90 m Construction: Plug-in system Shelf load: 1200 kg per shelf Accessories such as: Floor fixing Connectors Load warning signs Impact protection Guardrails Grated flooring Rear panel grating Depth stops Barrier railings and much more... Just ask us! Nodpfszavi Hox Amyocw Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex warehouse. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and non-binding. Subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). No warranty for defects in used and IIa goods. The respective manufacturer's warranties apply to new goods.

Condition: used, load capacity per storage section: 4,000 kg, total length: 3,600 mm, This package includes: 1 x IPE120x60 beam, 3,600 mm Manufacturer: SSI Schäfer Type: PR 600 Condition: used, good condition Beam length: 3,600 mm Height: 120 mm Bearing width: 60 mm Color: blue Load capacity: 4,000 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guardrails Grating Rear wall grating Deep stringers Barrier railing and much more... Just ask us! Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible upon individual agreement. - Offer Status: All offers are subject to change and availability. We reserve the right to sell items prior to confirmation. - Retention of Title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply. Ncedozavh Ajpfx Amyow

Condition: used, load capacity per storage section: 3,000 kg, total length: 2,700 mm, total height: 100 mm, 1 x Traverse IPE100x50, 2,700mm Condition: used, good condition Traverse length: 2,700mm Height: 100 mm Bearing width: 50 mm Color: green Rated load: 3,000kg Nodpfx Amjzavg Eoyecw Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guardrails Grating Rear panel grating Deep webs Barrier railings and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: good (used), Frame: 7800*1100*100 mm Cross beams: 3600*130 mm 3600*150 mm If you require shelving units or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used shelving systems and accessories and are happy to assist with your planning. Additional accessories, such as: Frame, corner, and impact protection, push-through protections, chipboard panels, mesh shelves, mesh rear panels, depth supports available. Shipping: Please enquire about freight costs, specifying your postal code, location, and the desired quantity of items. Further services: Nodet N Itbepfx Amyjcw Planning, shelf assembly/disassembly, purchase/sale. Subject to technical changes, errors and omissions, and prior sale!

Condition: used, Load capacity: 3200 kg/shelf Crossbars: Ncodpfxog Tmvhe Amyjw 3600*140*50 mm 2700*125*50 mm 800 kg/pallet load capacity Frames: 8500*1100*100 mm 7900*1100*120 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/dismantling, purchase/sale Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Condition: good (used), Just beams for sale: Meta 2700*100 mm 2400 kg/level 10 EUR/piece HLF 3300*140 mm 3200 kg/level 12 EUR/piece Hilo (new type) 3100*100 mm 2000 kg/level 11 EUR/piece Dexion P90 3600*100 mm 1400 kg/level Dexion P90 Silverline 2700*125 mm 2400 kg/level If you require racking or accessories in other configurations or designs, please do not hesitate to contact us. We offer a comprehensive range of new and used racking systems and accessories, and will gladly support you with your planning. Further accessories available, for example: Frames, corner and impact protection, load-through safety bars, chipboard panels, mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postcode and location, as well as the desired quantity. Nodpfxjq Tpk Ie Amyjcw Additional services: Planning, racking assembly/disassembly, purchasing/sales. Technical data, information, and prices are subject to change and errors. Intermediate sale reserved!

Condition: used, Lot of beams and frames for pallet racking 95 frames of 6 m (4 m + 2 m – welded) Frame spacing: 1.10 m Lot of 4 beams of 3 m Lot of 714 beams of 2.7 m Lot of wooden boards, 5 cm thick, suitable for holding paper pallets for printing industry use. Ncedsyg D Tajpfx Amysw To be dismantled on site – 4700 Eupen – Belgium

Condition: like new (used), shelf height: 7,800 mm, Used Meta frames for sale. Frame dimensions: - Length: 7800 mm - Depth: 1100 mm Price per unit: €170 plus VAT. Available: 150 units Racking Systems | Sales • Assembly • Dismantling • Repair | MM Lagertechnik We are happy to provide you with a non-binding offer tailored to your specific needs. Our services include: ✔ Sale of warehouse racking ✔ Assembly and disassembly ✔ Repair and maintenance ✔ Purchase of used racking systems ✔ Racking inspections according to regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your storage and operational equipment—reliably and efficiently. Nsdjy Itvzepfx Amyscw With our many years of experience in storage technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning through to implementation. Note: This listing does not constitute a binding offer. After you contact us, you will receive an individual offer tailored to your requirements.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. Njdpfxemhhyps Amyjcw The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Nodpfjmhh Dhsx Amyocw 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Nodpfx Aemhh Dzomyocw - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) Ncsdpfx Amsh R Taqjysw - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) Ncsdefdkb Tepfx Amyow - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Ncedpfemhh Anex Amyew - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Ncsdpfxeguk A Hs Amyjw - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard Nodpfx Aemhhy Nemyjcw - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Nsdpfjguk Dkex Amyocw Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. Njdpfx Amjmhh Dtjyecw According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) Nsdpfx Aoguk Dvsmyecw - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Crossbars: 2700x120x50 mm, 63 pieces Frames: 5200x1000x95 mm, 17 pieces 4600x1000x90 mm, 4 pieces 2300x1000x95 mm, 2 pieces If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, deep shelf supports. Shipping: Please request the shipping costs, providing your postal code and location, as well as the desired quantity of items. Nedjh Izr Ujpfx Amyocw Additional service offerings: Planning, shelving installation/disassembly, purchase/sale. Changes and errors in technical data, information, and prices, as well as sales subject to prior sale, are reserved!

Condition: excellent (used), functionality: fully functional, load capacity per storage section: 9,000 kg, total height: 4,400 mm, total width: 2,700 mm, load capacity: 1,800 kg, frame height: 4,400 mm, frame width: 1,100 mm, For sale: a complete set of MGL HX pallet racking – a robust, proven system for standard pallet storage. The ideal solution for operational warehouses, e-commerce, and medium-duty logistics. Goods available immediately – fast delivery with no weeks of waiting. Specification: System: MGL HX Type: Pallet racking Frames: Quantity: 400 pcs Height: 4,400 mm Depth: 1,100 mm Beams: Quantity: 3,000 pcs Length: 2,700 mm Load capacity: 1,800 kg per level Why choose this solution: ✔ Universal height – perfect for most warehouses ✔ Excellent price-performance ratio Nsdpfoywrryex Amyocw ✔ Large quantity – suitable for complete facility fit-out ✔ Immediate availability – minimize your warehouse startup time Additionally, we offer: Dismantling and installation Transport across Europe Assistance with warehouse layout planning and optimization Location: Poland Availability: Immediate Contact: Write or call – we will prepare a configuration tailored specifically to your warehouse.

Condition: excellent (used), Year of construction: 2022, total length: 1,850 mm, total height: 120 mm, load capacity: 3,000 kg, For sale: STOW cross beams in perfect condition, more than 5,000 units available -1850mm Njdsxprfzspfx Amyocw -120x50, 3000kg

Condition: used, We are offering used pallet racking for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Njdpfxey Dgcmo Amyecw Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 safety pins Yellow bumper guards (upright protection) can be purchased for €5.00 per piece net. PRICES Net price: €1,115.68 Gross price: €1,327.66 (incl. VAT) Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be organized on request YOUR CONTACT PERSONS Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Extra costs depend on the destination and shipment volume and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the case of an order. The price stated is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK in Nordhorn specializes in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used pallet racks for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Bay load: 2,400 kg Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: - 4 frames - 12 beams - 2 locking pins The yellow collision protectors (upright protection) can be purchased for €5.00 each (net). PRICES Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m of pallet racking Location: 14656 Brieselang – Transport can be arranged upon request Nodpjy Dga Ejfx Amyjcw YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be requested individually from us. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price stated is per unit/net price or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of intralogistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and trades. We continuously offer a range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks for success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions