Heavy duty shelf

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Pgodpfsmhhyasx Adnow According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm Pgsdpfsi Hpk Uex Adnow aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: used, Year of construction: 1961, operating hours: 7,027 h, power: 14 kW (19.03 HP), next inspection (TÜV): 01/2026, The tractor is in unrestored but good condition and is fully functional. This is a private sale. Type * Box-shaped central tube support Engine * Air-cooled, two-cylinder, four-stroke, in-line diesel engine with direct injection from MWM * MWM AKD 311Z, displacement 1400 cc, 19 hp, bore = 90 mm, stroke = 120 mm. Clutch: Single-disc dry clutch Transmission * Fendt, 6-speed range transmission (combined gear and dog clutch transmission) with 6 forward gears and 2 reverse gears on a single lever with a double H-shift. * Rear wheel drive Brakes * Foot-operated two-shoe brake acting on both rear wheels, designed as a steering brake. Handbrake as a duplex brake, acting on the transmission. Axles * Fendt rigid front axle with central tube, suspended. Axle load front = 900 kg, rear = 1290 kg Hydraulic system and power lift * Independent hydraulic pump, driven directly by the engine. Bosch hydraulic pump 11.0 liters/min, 110 bar. Dimensions and dimensions * Length = 3163-3420 Psdpfswggplex Adnegw * Width = 1517-1520 * Height = 1580. Ground clearance = 360 mm. * Permissible weight Total weight = 2190 kg Tires * Front tires 5.50-16 * Rear tires 8-28 Capacities * Fuel tank 20 liters * Hydraulic tank 5.5 liters, with tipper 11.0 liters * Transmission oil 13 liters * Engine oil approx. 4 liters

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Podpfx Aopcibmjdnogw

Year of construction: 2025, condition: new, consisting of: Pgodpfx Aocl Tvgednow - Trailer - Washing Elevator KWEM 2000 - Apple Belt Press KEB 500 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 750 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . .

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable brush deflection height: 25 mm with pneumatic damping Pgodpfx Aji Ezrzjdnow 1. brush: metal brush diameter 220mm 2nd brush : Tynex brush, grit 80, diameter 220mm Right - left rotation: for both brushes Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW Motor power feed: 0,37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Pgedpfx Adetr Iw Honow Empty weight: 2.150 kg Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), The vegetable belt cutter BCM-1650 is designed for small- and medium-sized vegetable processing companies. This machine is well suited for almost all kinds of vegetables, fruits, and salads and has a capacity of up to 1000 kg/h. The BCM-1650 delivers excellent cutting results due to its sophisticated concept of ‘rotating knife transition’ with small SS rollers guiding the product to the knife, along with extremely sharp knives. Cutting sizes and other options can easily be adjusted on the machine’s touch screen. The BCM-1650 can also be seamlessly integrated into a vegetable processing line for cutting, washing, and drying vegetables. Pgjdpevf Dr Ajfx Adnsw

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 Pgedpfx Aed S Eagsdnjw F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Pgedpfx Adjncd Azsnew Feeding : by 2 gear motors, Make NORD GEAR