Used Heating Plate Press for sale (36,763)

Year of construction: 2004, condition: used, GENERAL INFORMATION Year of manufacture: 2004 Overall width: 470 mm Overall height: 1,200 mm Overall length: 2,000 mm Miscellaneous: - Capacity: 213 liters - Design pressure: 10 bar - Design temperature: 110° C - Test pressure: 14.3 bar Location: Bremen Nameplate: Condition: used Kljdpfxsxqcime Ah Nsl Last application: winery

Year of construction: 2021, condition: new, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Kodpfogrkigox Ah Noll Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 2013, operating hours: 1,500 h, functionality: fully functional, Water heated hyrayulic Press Kjdpfx Aswiuxmsh Njll 9 storey (cutom made) Stainless Steel Plates 3,50m x 2,30m/each

Condition: used, Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders Kodpjd Hwwujfx Ah Noll

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 709863, overall weight: 828 kg, Specifications (Hot and Cold Side) PS max: 10bar TS min: 0°C TS max: 110°C V: 39L PT: 13bar Kjdpfowrh I Hox Ah Noll Fluid group:2 The Funke plate heat exchanger FP405-61-1-N-0 is a high-quality device that efficiently transfers heat between two media. Its innovative design allows effective and reliable heat transfer in various industrial applications. The heat exchanger is characterized by its robust construction and easy handling, ensuring a long service life and low-maintenance operation. It is ideal for use in heating, cooling, or process systems where efficient energy use and precise temperature control are required.

Condition: used, GENERAL Heat exchange surface: 4.0 m² Insulation: available Other information: Heat exchange surface: 4 (2 x 2) m² Side A: Volume: 9 liters Permissible operating overpressure: 7 bar Klodpfx Ajxqclbeh Nel Permissible operating temperature: -40/+20°C Side B: Volume: 29 liters Permissible operating overpressure: 8 bar Permissible operating temperature: -40/+20°C Location: Bremen Nameplate: Condition: used Last application: Pharmaceutical chemistry INSULATION Insulation material: Armaflex

Condition: new, GBS200H-30. 15 kW Connection: 4 x 22 mm solder. All staff speak Dutch, German, and English. Klsdpfoxqydbox Ah Nsl Prices are excluding VAT Shipping is possible (surcharge applies) (Subject to changes and errors in technical data, information, and prices. Prior sale reserved)

Condition: new, Alfa Laval CBH65-22 AH-F 20 kW Kledpfxsxqyaio Ah Nsl Capacity: 20 kW All staff speak Dutch, German, and English. Prices are excluding VAT. Shipping is possible (at additional cost). (Subject to changes and errors in technical data, information, and prices; prior sale reserved.)

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) Kljdsxf Uwlspfx Ah Nel - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: new, Alfa Laval CBH62-12AH-G Capacity: approx. 10 kW Length: 530.00 mm Width: 120.00 mm Height: 90.00 mm Weight: approx. 5 kg Connections Side A: 1" male BSP (gas) thread Side B: 19 mm weld connection Multiple units in stock Kljdexp Nzaepfx Ah Nol All staff speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (surcharge applies) (Subject to technical changes, errors, price modifications, and prior sale)

Year of construction: 1999, condition: not inspected (used), Sigma plate heat exchanger for milk processing Kjdpjh D Hkpjfx Ah Nell

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Ksdpfx Ahoh Eulge Njll

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Kjdpfjwypp Iex Ah Nell Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Year of construction: 2007, condition: used, Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C. Additional title: wort cooler Wort cooler capacity approx: 10 hl/h Content water: 4 l Kodpfx Ajw Uczroh Nsll Content wort: 4 l Max. pressure: 10 bar Weight: 165 kg Material: stainless steel Position: premounted on frame Features: splash guard, plate heat exchanger, aeration via Venturi jet

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Kjdpfx Ahjxgdrbj Noll

Condition: excellent (used), functionality: fully functional, Granite Plate - Dimensions 1400x250x160mm - Quality appx. Class 0 or better (will be checked) - frame on demand Ksdpfx Ahetnkdcj Noll - with mounted pneumatic press

Condition: used, Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B Baujahr / Year 1976 - Serial-No. 1214 4 Pressplatten  / Size with 4 pressure plates Pressfläche / Press size: 1 Pressplatte / 1 Press Plate 440 x 280mm - 2 Pressplatten / 2 Press plates 610 x 440mm Klodpfx Ajwhgaash Njl Pressdruck regulierbar / Pressure adjustable max. 6000KG Platzbedarf  (Höhe-Breite-Tiefe) / Place require 140 x 155 x 51cm Gewicht / weight 780kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Kjdpfx Ahjvcqtzs Noll Periphery: wort aeration, mixing pump, booster pump (water),

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Klsdpfx Ahoupy S Nj Njl Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Kedpfx Aow Hwp Noh Njll

Condition: good (used), APV Heat Exchanger. Type : N35. Kjdorwl I Hspfx Ah Nsll Normal capacity : 6.5m3/H. Transmission surface : 67,9m2. Working pressure : 6bar. Test pressure : 6bar. Volume, Side 1 : 94liter. Volume, Side 2 : 94liter. Working temperature, MAX/MIN. Degrees Celsius. 120/0. ORA.18

Year of construction: 1998, condition: excellent (used), table height: 2,250 mm, table width: 4,000 mm, Extra large heat press! For sale in excellent technical condition. Kodpfx Ahowfp R As Nell

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Kledpfot R Tr Sox Ah Njl

Year of construction: 1981, condition: ready for operation (used), A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible. Kjdpowzx Suofx Ah Noll

Condition: new, Filter plates (250 - 1200 mm) for all filter presses in all sizes and qualities, short delivery times, ask us Ksdpfeikl Uiox Ah Nell Location is 58762 Altena