Used Hc 310 for sale (2,803)

Condition: used, machine/vehicle number: 008107, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 310/9/A20/S2 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 310/9/A20/S2 Ncodpfx Adew U Rqzj Nel

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Ncjdox A Hi Ijpfx Ad Nsl Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Ncedjwuuc Aspfx Ad Nsl Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: ready for operation (used), Behringer automatic metal bandsaw, electrically controlled stop, infeed side 15 m, outfeed side 7.5 m Njdpfx Aow Tri Ajd Necl

Condition: new, Year of construction: 2025, Fully equipped lathe with a lead screw and a feed shaft. Machine features Precise design 2 axes digital readout Large spindle bore – Ø 36 mm Heavily ribbed prism bed made of gray iron Inductively hardened and precisely ground bed guides Ensured accuracy of spindle tip better than 0.009 mm Accuracy of lathe chuck speed better than 0.04 mm Left/right switch on the control panel With a lead screw for threading or automatic longitudinal feed Lead screw and feed shafts in two sintered bearings Automatic longitudinal and transverse feeds Lead screw and feed shaft guard Knobs by the slides with adjustable 0.04/0.02 precise scaling Included by default set of change gears for threading Emergency stop button Smooth and efficient drive of excellent spindle speed adjustment VARIO model equipped with an inverter for smooth spindle speed adjustment! Digital speed indicator By default comes with a solid steel base Technical data Swing over bed 310 mm Swing over cross slide 190 mm Centre width 900 mm Bed width 180 mm Spindle bore 38 mm Spindle tip MK5 Spindle speed 80 – 2000 rpm (adjustment in 2 ranges) Metric thread (18) 0.2 – 3.5 mm/turn Inch thread (21) 56 – 8 TPI Longitudinal feed 0.085 – 0.832 mm/turn Transverse feed Nsdpfxeric Ids Ad Necl 0.01 – 0.1 mm/turn Maximum upper slide travel 65 mm Maximum transverse support travel 210 mm Maximum longitudinal support travel 650 mm Tailstock spindle travel 100 mm Tailstock quill diameter 38 mm Tailstock quill taper MK3 Motor power 1.5 kW / 230V Dimensions 1520×675×1320 mm Weight 295 kg

Condition: new, Year of construction: 2025, Functions: 1. Direction of rotation switch: This switch allows the operator to control the direction of rotation of the rotator disc, which is important during precision welding work. 2. Direction of rotation switch: Thanks to this tool, the operator can easily change the direction of rotation of the disc, which allows the device to be flexibly adapted to various tasks. 3. Smooth regulation of the disc rotation speed: Adjusting the disc rotation speed allows you to adapt the device to various materials and welding processes, which increases the precision and quality of work. 4. Compact, compact design: The compact design of the device saves space in the workshop and makes it easy to move the device to different work stations. 5. Control pedal: The control pedal allows the operator to precisely control the operation of the rotator, which is important when welding and assembling elements. 6. Thermal fuse: The presence of a thermal fuse protects the device from overheating, which increases operational safety and durability of the machine. 7. Brush motor: The brush motor ensures stable and effective operation of the device, which is important in welding applications. 8. Disc inclination range 0 - 90°: The ability to tilt the disc in the range from 0 to 90 degrees allows you to work in the optimal position, which translates into the quality of welds and the operator's comfort. 9. Possibility of installing a centering holder: This enables accurate and stable mounting of elements, which is important for precise assembly and welding work. Advantages: 1. Higher work efficiency: Thanks to the ability to rotate cylindrical elements, assembly and welding work becomes more effective. 2. Reducing production costs: Increasing the precision and quality of work can help reduce reject costs and improve production efficiency. 3. Repeatability of the joints made: The device ensures constant quality of welds and joints, which is important in industries that require repeatability. 4. Flexibility in use: The ability to adjust the speed, direction of rotation and inclination of the disc makes the tool flexible and adaptable to various tasks. 5. Improves the welder's working conditions: It facilitates the welder's work, enabling welding in the optimal position, which affects the comfort and safety of work. Set contains: 1. PS-310 positioner device. 2. Control pedal. 3. Power cable. 4. User manual. 5. Mast with welding fixture. This kit contains the necessary elements to start working with the device and allows you to use its full capabilities in terms of assembly and welding. Technical parameters: Maximum load 30kg Worktable size φ310mm Tilt angle 0° ~ + 90° Rotation speed 1-15 rpm Rotational power 120W Manual tilt speed Voltage 220V-1PH-50HZ Weapon support Dimensions 500x500x440 mm Weight 34 kg Nsdpferigk Njx Ad Njcl *three-jaw chuck is not included in the set

Condition: new, mileage: 1 km, power: 228 kW (309.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, loading space length: 7,680 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2025, Equipment: tail-lift, Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Ncodpfx Adsx Eydts Nel Transmission: ZF Powerline, 8-speed, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Parabolic spring Rear axle: Max. axle load: 13,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Air suspension Weights Unladen weight: 9,200 kg Payload: 9,800 kg Gross vehicle weight: 19,000 kg Functional Tail lift: DHollandia DH/LM 2.0, rear tailgate, 2,000 kg Body manufacturer: Carr. Veekemans Plywood Condition General condition: very good Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: None

Condition: excellent (used), mileage: 288,952 km, power: 70 kW (95.17 HP), first registration: 11/2011, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 2, total length: 6,200 mm, total width: 2,100 mm, total height: 2,200 mm, loading space length: 3,400 mm, loading space width: 2,100 mm, Year of construction: 2011, Equipment: ABS, central locking, electric window regulation, full service history, power assisted steering, power mirror, soot filter, traction control, General information Number of doors: 2 Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1800 kg; Steering; Tyre profile left: 20%; Tyre profile right: 20% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 2.490 kg Carrying capacity: 1.010 kg GVW: 3.500 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Functional Maximum cooling temperature: -40 °C Make of bodywork: Carlsen Baltic Tiefkuhler Cooling engine: electric Wall thickness: 10 mm Interior Interior: black Condition Technical condition: very good Visual appearance: very good Ncsdpfxovzb S Eo Ad Nsl Number of keys: 1 Other information Cool unit make: CARLSEN BALTIC Additional information Please contact Moussa or Youssef for more information Mercedes Sprinter 313 CDI EURO 5b Carlsen Baltic/ Herbrand GMBH Coldcar/ Eiswagen/ Vrieswagen 10 chambers / 10 TURE / 10 CHAMBERS Freezes down to -40 degrees Celsius Cooling works great More than 20 in stock Technically and optically in very good condition Cool unit brand: CARLSEN BALTIC

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Nodpfx Adewx Aaqo Nscl Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, controller manufacturer: SIEMENS, overall weight: 5,000 kg, spindle speed (max.): 9,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 1999. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information. Additional equipment • 1 vertical drilling unit in Y Direction • 1 vertical drilling unit in X Direction • 1 main spindle with programmable direction of rotation • 1 centrally integrated CNC axis rotating 360 degrees • 1 adapter unit saw, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit horizontal drilling and milling head (cross head) • 1 adapter unit horizontal milling cutter (face milling) • 2x adapter units for hinge drilling • Includes 1 new Siemens vacuum pump + numerous accessories Machine Benefits Technical Machine Benefits • Max. Clamping height from top edge of the suction plate: z1 100 mm • Working height: 950 mm • Path operation speed: 20 m/min • Acceleration: 5 m/s² • Changing field area without pendulum machining: x 2 x 1400 mm • Free space in the middle: x 200 mm • With pendulum machining: x 2 x 900 mm • Free space in the middle: x 1200 mm Ncedox N Ulmspfx Ad Nol • Tool feed: automatic • Feed force: 11000 n Extra Information Media Extraction standard: Connection for 200 mm, 120 mm, and 100 mm diameter Extraction speed: Approx. 28 m/sec Extraction volume: Approx. 3200 m³ per hour 1 vacuum pump 40 m³/h Compressed air: Central connection for 1/2" with maintenance unit. Air pressure 6 bar constant Electrical Equipment Electrical installation according to EN Control cabinet dimensions (HxWxD): 2000 mm / 1200 mm / 600 mm Safety and protection measures according to CE regulations

Condition: good (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 -Dimensions: Ø 310 x 165 mm -Weight: 5.5kg -Quantity: 1 piece available Ncjdpfx Adsqpl Rus Njl

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Ncedpfx Adew U Dt Ne Njl Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, controller manufacturer: ESA, controller model: S 875W, bending force (max.): 220 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, number of axes: 8, type of crowning: CNC-controlled, oil tank capacity: 220 l, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, number of support arms: 2, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Nedpfxex N Rxce Ad Njcl Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Condition: used, mileage: 384,315 km, power: 228 kW (309.99 HP), first registration: 07/2004, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel-air, total length: 8,400 mm, total width: 2,550 mm, loading space length: 6,050 mm, loading space width: 2,400 mm, loading space height: 2,350 mm, Year of construction: 2004, Equipment: ABS, EBS, air conditioning, cruise control, electric window regulation, fog lights, power mirror, tail-lift, traction control, trailer coupling, = Additional options and accessories = - Heated exterior mirrors - High beam - Speed limiter - Beacons - Air suspension - Radio/CD player - Side door - Sun visor - Toolbox - Towing eye = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,967 cc Axle configuration Brakes: Disc brakes Front axle: Max. axle load: 9,000 kg; Suspension: leaf springs Rear axle 1: Twin tires; Max. axle load: 11,500 kg; Suspension: air suspension Ncedpfx Asxwxv Asd Nol Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: air suspension Weights Curb weight: 11,155 kg Payload: 16,845 kg Gross vehicle weight: 28,000 kg Functional Tail lift: B.A.R, tailgate, 1,500 kg Identification Registration: BP-NL-05

Condition: excellent (used), mileage: 425,634 km, power: 228 kW (309.99 HP), first registration: 05/2014, fuel type: diesel, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, loading space length: 8,550 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, Year of construction: 2014, Equipment: AdBlue, tail-lift, YS2P4X20005343324 = Further Information = Number of cylinders: 6 Unladen weight: 11,650 kg Payload: 7,350 kg Gross vehicle weight (GVW): 19,000 kg Tail lift: Dhollandia, rear tailgate, 2,000 kg APK (Main Technical Inspection): inspected until 05/2026 Ncedpexzi Tmofx Ad Njl Technical condition: very good Visual condition: very good Contact Sales for further information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber) MOB: Dutch (Available on WhatsApp and Viber) When paying by bank transfer, the funds need to be transferred to our bank account as detailed below. Always check the payment details stated on our website. If you have received other information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, mileage: 150,330 km, power: 70 kW (95.17 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 2,570 kg, maximum load weight: 930 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, construction height: 2,700 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Only goes up to 3rd gear. The used Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 is a versatile box van with a 2.1-liter diesel engine and an output of 70 kW (95 hp). The vehicle features an automatic transmission and rear-wheel drive. It was first registered in July 2012 and has a mileage of 150,330 kilometers. The yellow paint and Level 4 environmental sticker allow access to low-emission zones. The van is suitable for commercial use and has space for two people. With an overall length of 7,057 mm, a width of 2,100 mm, and a height of 2,700 mm, the Sprinter offers generous storage space. The wheelbase of 4,325 mm ensures stability and even weight distribution. Diesel consumption is 9.8 liters per 100 km in the combined cycle. The gross vehicle weight is 3,500 kg, making it ideal for transporting goods. The Sprinter is equipped with a rearview camera and features an interior with shelves and a walkway. Although the vehicle currently only goes up to third gear, it is suitable for export or industrial use with appropriate repairs. The vehicle's MOT is valid until October 2024. Viewings are possible without prior notice. Nsdpfx Asxz Hyded Njcl Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Year of construction: 2022, condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm diameter planer shaft: 70 mm Tersa knife shaft rpm: 5500 dimensions planing fence: 1300 x 150 mm inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Machine is in our showroom and immediately available. Ncedpfx Aedkl Sqjd Njl

Year of construction: 2025, condition: as good as new (ex-display), Heavy duty hand operated guillotine Nedpfx Adsk N A Smj Necl Suitable for cutting hard breds, vegetables, frozen food stuff or others. Cutting opening suits for products up to 150x150mm Fully stainless steel.

Condition: used, Centerless grinding machine ESTARTA 310 Ncjdpfx Aoq Ehqfed Nel

Condition: reconditioned (used), GENERAL CHARACTERISTICS Maximum Infeed grinding length 150 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø350 x Ø200 x 150 mm Grinding wheel width 150 mm Peripheral Grinding Wheel speed (m/s) 1.700 RPM Regulating wheel speed nº 4 Min/max Regulating wheel speed (r.p.m.) 21, 30, 42, 310 Regulating Wheel Dimensions (OD x ID x width) Ø250 x Ø140 x 150 mm ELECTRICAL CHARACTERISTICS Motor power grinding wheelhead 15 Cv Total Power 16,5 Cv DIMENSIONS AND WEIGHTS High 1.535 mm Long 1.654 mm Weight 1.900 kg Width 1.500 mm Ncodjd I Un Ijpfx Ad Nel

Condition: new, mileage: 1 km, power: 228 kW (309.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, loading space length: 7,840 mm, loading space width: 2,600 mm, loading space height: 2,600 mm, Year of construction: 2024, Equipment: tail-lift, Technical information Number of cylinders: 6 Engine displacement: 6,700 cc GVW: 19,000 kg Gearbox Gearbox: ZF Powerline, 8 gears, automatic Axle configuration Tyre size: 315/70R22.5 Ncjdpov Tlmwsfx Ad Nsl Brakes: disc brakes Front axle: Max. axle load: 8000 kg; Tire profile left: 100%; Tire profile right: 100%; Suspension: parabolic suspension Rear axle: Max. axle load: 13000 kg; Tire profile left: 100%; Tire profile right: 100%; Suspension: air suspension Functional Tail lift: Dhollandia DH/LM, tailgate, 2000 kg Brand of bodywork: Carr De Bruecker Plywood Condition General condition: very good Technical condition: very good Visual condition: very good Damage: none Warranty Warranty: No

Condition: new, mileage: 1 km, power: 228 kW (309.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, Year of construction: 2024, Equipment: tail-lift, Technical information Number of cylinders: 6 Engine displacement: 6,700 cc GVW: 19,000 kg Gearbox Gearbox: ZF Powerline, 8 gears, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Max. axle load: 8000 kg; Tire profile left: 100%; Tire profile right: 100%; Suspension: parabolic suspension Rear axle: Max. axle load: 13000 kg; Tire profile left: 100%; Tire profile right: 100%; Suspension: air suspension Nedpfxov Tlm Ds Ad Nscl Functional Tail lift: Dhollandia DH/LM, tailgate, 2000 kg Body brand: Carr. Veekemans Plywood Condition General condition: very good Technical condition: very good Visual condition: very good Damage: none Warranty Warranty: No

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm Nedpfxox R U E Nj Ad Njcl y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Equipped for dry milling Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary

Condition: ready for operation (used), Two interconnected and identical block bag packaging and sealing machines Fawema are available. Nominal packaging output: approx. 110bags/min, realistic packaging output: 70-75bags/min, packaging product: powder/granulate, max. filling weight: 5kg, bag type: block bag, packaging materials: paper/plastic/laminate, min. bag dimensions X/Y/Z: 60mm/40mm/120mm, max. bag dimensions X/Y/Z: 200mm/130mm/500mm. Machine dimensions X/Y/Z: approx. 4500mm/1450mm/2100mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Njdpjxyk T Eefx Ad Nscl

Condition: used, mileage: 640,000 km, power: 228 kW (309.99 HP), first registration: 02/2009, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: soot filter, tail-lift, Tail lift: Nedpoxzxz Tefx Ad Nscl ----- Retarder - Air conditioning - Tail lift Suspension: Leaf/air