Used Harding Bridge Port for sale (7,291)

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) * Fjdpsu N Avxjfx Advspd

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA Fsdpfx Ajxwdxcodvopd frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1992, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Fpsdpfx Adoq Tdh Eovsd Flatness of the measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are in order Measurement report on request for an additional charge

Condition: used, Year of construction: 1992, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: Fpedpfx Asu Nvgdjdvsd -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes *

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Fsdpfxjyf Rqvj Advjpd Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2530 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 r.p.m. (5.000 r.p.m. direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security ernal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: like new (used), Year of construction: 2010, Retrofitted: 2026 Fpjdpfeyf Rrmex Adved Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 8500 x 2500 mmNumber of T slots: 17T slots dimensions: 22 mm Traverses of axis X axis traverse: 8000 mmY axis traverse: 3800 mmZ axis traverse: 1500 mmVertical capacity (VC): 168 / 1668 mmDistance between columns: 3100 mm Milling head Auto-indexing differential head UAD (every 0,02º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871) / Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 35000 kgMachine weight approximate: 79000 KgMachine dimensions approximate: 22700 x 7660 x 6800 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceAutomatic tool changer: ATC-60Chip conveyor: 2longitudinal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Fsdpeyf Rrtefx Advjpd Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 - 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accesories Guarding with 2 doors and new perimetral safety fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale conditions: On request View all technical features

Condition: like new (used), Year of construction: 1996, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Fpjdpfsyf Rr Tjx Advsd Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features

Condition: like new (used), Year of construction: 1996, Retrofitted: 2023 Fpodpjyf Rtdefx Advsd Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1800 mmDistance between columns: 1680 mmZ axis traverse: 800 mm Milling head Head type: Standard vertical spindleTool clamping system: HydraulicTaper nose: ISO 50Speed range: 20 - 2000 r.p.m.Spindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Max Weight on table: 10000 kgMachine weight: 21500 kgMachine dimensions: 7300 x 2690 x 3400 mm Accesories Guarding: YesCoolant: ExternalElectronic handwheel: HR-330 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: like new (used), Year of construction: 1998, Retrofitted: 2024 Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding   Automatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request Fjdpfjyf Rq Aox Advepd   View all technical features

Condition: used, Double-Girder Overhead Travelling Crane, Bridge Crane KONECRANES Type XLD 32t Serial No. 18 / 4363310 Year of manufacture: 2002 Load capacity: 32 tons Span: 5750 mm Lifting height: max. 12.5 meters Girder height: 560 mm (2 bridge crane girders) Travel speed (crane): 20 m/min, infinitely variable via frequency inverter Trolley travel speed: 16 m/min, stepless via frequency inverter Hoist with double-girder trolley KONECRANES Type XL516N40HDC424B0EE (XL500) Serial No. (hoist): C00204, Year: 2002 Crane classification: DIN 15011 (FEM 1.001) "M4"/"1Am" Rated load: 32 tons Hook path: max. 12.5 meters Main hoist speed: 2.5 m/min Fpedpfxex Edq Io Adved Fine hoist speed: 0.42 m/min Trolley gauge: 2400 mm - Trolley with double-girder drive - Equipped with REMOX radio remote control (frequency 434.675 MHz) - Double load hook (twin hook) - Complete cable drag chain for power supply - Electrical control cabinet located on the bridge - Very low operating hours Main hoist motor power: 18 kW Auxiliary hoist motor power: 3 kW Power supply: 400 Volts, 50 Hz Transport dimensions (L x W x H): 6000 x 2450 x 2800 mm Total weight: approx. 5000 kg In very good condition

Year of construction: 1979, condition: good (used), Overhead Crane DEMAG Type: EKKE Year 1979 Fodpfx Ajh Uqbfsdvepd Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available with 20 meter power rail included.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, overall weight: 3,100 kg, total width: 10,600 mm, load capacity: 8,000 kg, working height: 9,000 mm, GZUT/SWF bridge crane 8t, 10.4m, emag: 9m in excellent condition for sale Manufacturer: GZTU Type: LNE Year of manufacture: 2004 Lifting capacity: 8t Span (cone crown distance): 10.4 m Fpjdsx Dk A Ijpfx Adved Total width: 10.6m Bridge running gear speed: 20 m/min Lifting speed: 5 / 0.83 m/min (two-stage) 400 V / 50 Hz Dead weight: 3.1t Noise level: Lm(A) ≤ 85 dB(A) With wireless remote control, documentation. Additional information, exact dimensions can be found in the pictures.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, overall weight: 8,000 kg, total length: 16,300 mm, load capacity: 12,500 kg, Manufacturer: STAHL Crane Komép bau " Completely renovated in 2011" Span: 16.3m Fpjdpfxsxtmhlj Adved Lifting height: 10m Load capacity: 12.5t Modernized, wired remote control system, new STAHL 12.5t trolley

Condition: excellent (used), Year of construction: 2012, radio controlled; 2 trolley, Max. Capacity 30t; Span 14.100mm; Trolley 1.600mm; Impeller Diameter 420mm; Trolley Diameter 280mm; Nr. of Wheels 4. including, steel pillar construction, crane runway(blue color metal parts). Fpjdpfx Ajlz T Nkodvod

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 6310, CNC – rotary-head bridge saw SPRINT 456 Vacuum manipulator 500 kg X-axis 4,150 mm Y-axis 4,550 mm Z-axis 600 mm Spindle drive motor 18.5 kW Drilling unit with 1/2" left-hand thread Fpjdpfxjyhlc Sj Adved Software EasyCut / EasyStone Premium Worktable 4,140 mm x 2,000 mm (tilting table) Additional table extension 4,140 mm x 1,200 mm Underslung saw Steel foundations Slab thickness measuring unit Saw blade measurement Air conditioning Slab digitization system Spray bar

Condition: used, machine/vehicle number: WK0S0002400234186, axle configuration: 3 axles, first registration: 05/2019, suspension: air, tire size: 385/55, tire condition: 30 %, color: other, Year of construction: 2019, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle - SAF Assen = More information = Tyre size: 385/55 Make axles: SAF Tyre profile: 30% Brakes: disc brakes Fedpjyhbz Dofx Advopd Suspension: air suspension Rear axle 1: Lift axle

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Fpedpfxjya Iuho Advod Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: used, Year of construction: 1984, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Fjdpfjudditjx Advepd Trolley Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Fodpfeyfmm Tex Advepd Storage location: Shelf 1

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch Fedpfx Ajx Tzh Njdvepd -Manufacturer: Siemens, Ethernet Switch Scalance XB008 8-port -Type: 6GK5008-0BA10-1AB2 -Dimensions: 110/45/H85 mm -Weight: 0.2 kg

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Fpjdjx Tud Repfx Advod Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Fsdpoqi Eh Hofx Advopd Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: like new (used), Year of construction: 2020, overall weight: 1,327 kg, total length: 7,000 mm, total width: 2,500 mm, load capacity: 6,000 kg, We are offering this used uniman JTHS1 6000/7-2/2.5-1 spreader beam, year of manufacture 2020. Fsdpoyddnfofx Advepd Manufacturer: uniman s.r.o. Model: JTHS1 6000/7-2/2.5-1 Serial number: 262/718 Year: 2020 Load capacity: 6000 kg Dead weight: 1327 kg Condition: used – as new Including transport and storage trolley If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2716, Equipment: documentation/manual, VBF Stahl BL 500 Hardcover bookline Machine number 2716 Built in 1997 Size max 380x270 mm Speed max 1500-3360 c/h Book block thickness max 70 mm Size min 100x100 mm Book block thickness min 2 mm Size max 270 x 380 mm min 85 x 100 mm product thickness max 70 mm min 5 mm Speed max 3.300 c/h Equipment • CAC/COS • main engine frequenzcontroled • automatic central lubrication system • Maschinenrahmen for 5 stations • infeed with IR warm up • automatic thickness control • rounding and backing station • 5 stations • Zeichenband-Anklebeeinrichtung • gluing unit • gauzing and moll station • gluing unit • headbanding and backlining station • pressing station • Pressing station • cover magazin • cover pile belt • cover rounding station • book pressing and forming machine EP 508 • delivery to the right • standard equipment • 1 set of operater manuals • 1 spare part catalogue • 1 set of electrical diagrams Fpjdpfx Aoycqfnsdvod • 1 set of standard tools • standard equipment • Sigloch Stacker Price 95.000,00 € Condition: working condition with all functions