Used Hand Tools for sale (42,533)

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, Hodpfx Aeucdt Aoahjp 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, Hjdpfx Aaexz Dqgohjp toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, Hedow U Sf Tepfx Aahsp spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Hsdpjxftqdsfx Aahsp

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Hjdpfx Aasydvzdohep Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring Hjdou Impyopfx Aahop spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley filled Contents and equipment see pictures Hodpfxovki A Re Aahop

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm Hsdpfxsxcg Evj Aahjp angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Hedpfxoxfaqws Aahsp Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: excellent (used), XYZ 710 VMC Vertical Machining Centre, Table Size 800mm x 445mm (Vac Table not included) with Siemens Sinumerik CNC Control, 24 Tool ATC, BT40 Spindle Taper, 8000rpm Spindle Speed, Filtermist FX5002 Extractor. S/No. SMT00054 Hjdpexvpffjfx Aahsp Delivery available on request, at extra cost. 14 day return or repair.

Condition: used, 2 x radial tool holders VDI 40, each: 400 Euro net. Hjdpfx Ajtz U Iioahjp 2 x axial tool holder VDI 40, each: 250 Euro net.

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, tool holder -Quick-change tool holder: Quick-change turning tool holder -Recording dimensions: see photos Hodpfx Aszhuwwoahsp -Tool holder: for grooving/slotting steel -Dimensions: 140/60/H125 mm -Weight: 1.9 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Walter Helitronic Power - Year of manufacture: 2005 - Control system: HMC600 i7 panel with Tool Studio 3.0 - Cylindrical loader - Grinding spindle motor power: 11.5 kW Hodpszht Dvjfx Aahjp

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Rollomatic 660XW, year of manufacture 2024, 6-axis CNC tool grinding machine: Control system: FANUC 30iMB Grinding wheel changer: 6-position Tool diameter: Ø 0.1 – 12.7 mm 4 linear axes + 2 rotary axes Grinding spindle (max.): 14 kW Spindle speed: 500 – 12,000 rpm Hedpfxezhtrgs Aahjp Machine dimensions: 1840 × 1560 × 2250 mm Machine weight: approx. 2,500 kg

Condition: good (used), SET of Tool Holders SK 40 tool holders according to DIN 69871, with gripper groove and tightening thread M16 (some with screwed-on tightening bolts) Consisting of: Arbor sleeves: 1 piece, Ø 13 4 pieces, Ø 16 8 pieces, Ø 22 1 piece, Ø 27 (without clamping screws, spacer rings, drive keys; these are available in stores) WELDON holders 5 pieces, Ø 6 1 piece, Ø 8 8 pieces, Ø 10 2 pieces, Ø 12 9 pieces, Ø 20 5 pieces, Ø 25 4 pieces, Ø 28 Hjdpfezhrk Ijx Aahop Reducing sleeves 2 pieces, MK 3 Total of 50 pieces (unit price only €12.00 net) Only available as a complete set!

Condition: good (used), SK40 collet chucks – faceplate chucks Approximately 80 pieces, in very good condition. Hsdpfxjzhrf So Aahep Price, net: €12/piece.

Condition: good (used), Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos -Dimensions: Ø 125 x 125 mm Hjdpfx Aozhl Dboahsp -Weight: 5.7 kg

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 Hsdpfx Ajzhlgcjahjp • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: good (used), Year of construction: 2004, total height: 500 mm, overall weight: 500 kg, total width: 800 mm, rotary table diameter: 180 mm, table load: 200 kg, Metal cutting Tooling Nikken - CNC180 MACH-ID 9663 Make: Nikken Hsdpezhlb Hjfx Aahjp Type: CNC180 Control: ULTIMAX Year: 2004 Table Ø: 180mm Table load:200 Length: 1200mm Width: 800mm Height: 500mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW Hsdpjwxrfpjfx Aahop - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete Hjdepix Nkspfx Aahep -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces -Type: various designs, see photos Hjdpjzhkq Tsfx Aahep -Price/Fee: complete -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg

Year of construction: 2015, condition: used, Exhibit Storage location: Sonnefeld Hsdpfx Aasv Dat Tehop

Condition: used, mileage: 78,000 km, power: 132 kW (179.47 HP), first registration: 01/2017, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,670 mm, total width: 2,550 mm, total height: 3,470 mm, loading space length: 5,200 mm, loading space width: 2,450 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! Sales are preferably made to businesses. Internal ID number: [3404] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (technical inspection) & emissions test * Nationwide delivery * Financing available, even without a down payment * Spring offer: On request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * German vehicle * Accident-free * 1st owner * Regularly serviced * Ready for immediate use * Euro 6 standard * Overall dimensions: Length = 7,670 mm / Width = 2,550 mm / Height = 3,470 mm * Total weight: 7,200 kg / Unladen weight = 3,440 kg / Payload = 3,760 kg * Load compartment dimensions: 5,200 mm / Width = 2,240 mm / Height = 2,450 mm * XXL box body * Cruise control * Automatic climate control * Reversing camera * Comfortable driver's seat * Bluetooth multimedia function Special equipment: Storage compartment on the dashboard with USB connection, trailer socket 13-pin, audio system: digital audio system (DAB+) with USB and Bluetooth hands-free system, roof storage compartment with DIN compartment, automatic climate control, comfort headrests for passenger compartment, cooling compressor 170 ccm, switch for lighting in the load compartment, seats in the cab: comfort driver's seat (hydraulic), Additional equipment: Airbag driver side, anti-slip control (ASR), version: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, brake assistant, electronic brake force distribution, digital tachograph, rear axle suspension: trapezoid, windshield and side windows tinted, generator 150 A, speed limiter 90 km/h, grab handle A-pillar, body/superstructure: standard platform, instrument cluster with pixel matrix display, fuel tank: 90 liters, headlight range adjustment, engine 3.0 L - 132 kW diesel, radio preparation with speakers, wheelbase 4350 mm, spare wheel in driving condition, spare wheel holder between chassis longitudinal members, low emissions according to Euro 6 emissions standard, seats in the cab: passenger double seat with headrests, service indicator, permissible total weight 7.00 t ----Do you want to lease or finance? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m.----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sales are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers. Hjdpjzhi Htsfx Aahop

Condition: used, mileage: 84,000 km, power: 88 kW (119.65 HP), first registration: 03/2020, fuel type: diesel, overall weight: 3,000 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,300 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note: Sales are preferably made to commercial customers. Internal ID number: [3414] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery * Financing possible even without a down payment * Spring offer: Upon request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * German vehicle * Accident-free * 1st owner * Regularly maintained * Immediately ready for use * Euro 6 standard * Long wheelbase * Trailer hitch Hjdpfszhhyljx Aahep * Cruise control * Air conditioning * Rear view camera * Navigation system * Load compartment with wood paneling * LED daytime running lights Special equipment: Parking assist front and rear with rear view camera, rear wing doors with glazing (opening angle 180 degrees), wooden floor in the load compartment, clear view package, mobile office package 2, wheel covers, sliding door load/passenger compartment right with glazing, paneling in the load/passenger compartment Additional equipment: Airbag driver side, Anti-Slip Regulation (ASR), exterior mirror elect. adjustable and heated, battery 85 Ah, on-board computer, rev counter, automatic activation for driving lights, glove compartment with cooling function, interior filter: pollen filter, body/structure: standard panel van, fuel tank: 80 liters, steering column (steering wheel) adjustable, model update, engine 2.0 L - 88 kW dCi Diesel Energy, rear fog light, radio preparation, wheelbase 3498 mm, tire repair kit, low emissions according to exhaust standard Euro 6d-TEMP, seat cover / upholstery: fabric, seats in the driver's cab: driver's seat comfort, 3-way adjustable, start/stop system engine, lashing eyes in the load compartment on the side, lashing eyes load compartment floor, preparation for electrical equipment, heat protection glazing ----Would you like to lease or finance? We offer attractive offers – financing is possible even without a down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.