Used Hand Grinding Machine for sale (69,906)

Condition: good (used), Year of construction: 2019, 1 used horizontal reciprocating roller grinding machine Manufacturer: Granlund Type: 650 XB Year of manufacture: 2019 Laodpfxsy Nxd Te Anuec Operating hours: 2905 Control: Fanuc Series 31i - B Technical data Max. workpiece length (mm): 300 Outer diameter of ring grooves (mm): 120-650 Grinding wheel diameter (mm): 356 Grinding wheel thickness (mm): 75 Tailstock quill stroke (mm): 45 Equipment: automatic grinding wheel dressing device, 2 x tailstock, paper band filter system, oil mist extraction, control cabinet with cooler, grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Technical features It is possible to perform deep grinding on soft workpieces. This means that no pre-milled blank parts need to be manufactured or purchased, as the machine performs the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg Lasdpfxemnntme Anuoc - with - clamping device - presetting device

Condition: good (used), 1 used surface grinding machine Manufacturer: Geibel und Hotz Model: FS 50 Optimus SA Technical data Design: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 580 mm Cross travel (Y-axis): 250 mm Table speed: Infinitely variable from: 2 m/min Lajdpfx Asw Suyhsnuoc up to: 28 m/min Automatic vertical feed: Grinding wheel speed: from: 2800 rpm Connection 50 Hz 3-phase: 400 Volt Grinding spindle motor: 2.2 kW Total power requirement: 7 kW Machine weight approx.: 2000 kg Machine dimensions: Length: 1800 mm Width: 1200 mm Height: 2250 mm

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: Ljdpfx Anjxgbb Tjujac - Digital readout - Diaform device

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm Laedjn Atchopfx Anujc weight 7 to

Condition: good (used), Year of construction: 1998, working area 3 - 50 mm lip angle 40-180 ° drill diameter 3-50 mm weight of the machine ca. 0,18 t Lasdpezczhgefx Anujc dimensions of the machine ca. LBH 0.9 x 1,0 x 1,40 m Incl. workpiece head for switchable 1:1 / 1:2 ratio Incl. special web-thinning attachment for split-point grinding Incl. 6-jaw chuck Incl. work light Incl. operating manual

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,600 mm, feed length X-axis: 560 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 200 kg, grinding height: 400 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 1 m/min, grinding wheel diameter: 200 mm, distance table to spindle center: 450 mm, table speed: 25,000 mm/min, table length: 520 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 2,850 rpm, spindle speed (min.): 2,850 rpm, overall weight: 950 kg, distance stand to spindle center: 300 mm, table height: 700 mm, grinding spindle motor power: 1,500 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 1 m/min, travel distance X-axis: 560 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 2,850 rpm, grinding spindle speed: 2,850 rpm, distance table to quill: 450 mm, warranty duration: 12 months, grinding wheel speed: 2,850 rpm, input voltage: 400 V, disc diameter: 200 mm, control cabinet length: 600 mm, control cabinet width: 400 mm, control cabinet height: 1,200 mm, space requirement height: 2,500 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, SURFACE GRINDING MACHINE SGA-2550AHD WITH PLC CONTROL The professional SGA-2550AHD Surface Grinding Machine has been designed for precision machining of flat surfaces in tool rooms, manufacturing facilities, and metalworking workshops. Equipped with a PLC control system, electromagnetic chuck, and high-quality components, the machine delivers excellent grinding accuracy, high repeatability, and outstanding operator comfort. The robust machine structure ensures stability during operation, minimizes vibration, and allows for superior surface finish quality. The grinder is ideal for machining tool steel, structural steel, cast iron, and other materials requiring precision grinding. MAIN ADVANTAGES • PLC Control System • Electromagnetic Chuck • High Grinding Accuracy • Rigid Machine Construction • Professional Coolant System Lodjzd U Eyopfx Anusac • Easy Operation and Programming • Excellent Process Repeatability • CE Certified PRECISION MACHINING The SGA-2550AHD is equipped with a 250 × 520 mm working table and a 250 × 500 mm electromagnetic chuck. This configuration provides secure workpiece clamping and excellent machining accuracy. PLC CONTROL SYSTEM The modern PLC control system improves grinding efficiency, increases productivity, and allows easy adjustment of machining parameters. It is suitable for both single-piece and serial production. STANDARD EQUIPMENT • Coolant Tank • Electromagnetic Chuck • Balancing Arbor • Wheel Flange • Wheel Extractor • Leveling Wedges and Bolts • Tool Box and Service Tools • Standard Grinding Wheel • Working Lamp • Wheel Dresser Stand OPTIONAL EQUIPMENT INCLUDED • Full Working Area Protection • Magnetic Separator • Dust Collection System • 2-Axis Digital Readout (DRO) • Built-in Electromagnetic Chuck Controller • Wheel Balance Stand • Diamond Dresser SAFETY The machine is equipped with all necessary safety systems in accordance with European standards. The robust construction, protective guards, and CE marking ensure safe and reliable operation. TECHNICAL DATA Model: SGA-2550AHD Working Table Size: 250 × 520 mm Electromagnetic Chuck Size: 250 × 500 mm Control System: PLC APPLICATIONS • Tool Rooms • Manufacturing Plants • Mechanical Workshops • Tool Steel Grinding • Structural Steel Machining • Cast Iron Machining • Precision Machine Component Production DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, commissioning assistance, process consulting, and access to spare parts and after-sales service. CONTACT US If you require additional information or a customized quotation, our specialists will be pleased to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: stufenlos elektronisch total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, dwheel, full cabin * Ljdpjq Sbh Usfx Anusac

Condition: used, Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Lsdpjzd Ui Esfx Anueac Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Lodpfezcyccjx Anusac Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Condition: used, Year of construction: 1983, Surface Grinding Machine MONOPRECIS 1DR Lsdpfszd Txfjx Anueac Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Laodpfx Anozd Szxouec Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: excellent (used), Year of construction: 2014, 4-axis mitre grinding machine with water tank and pump. Lajdpfx Anszd Sm Ujujc Width: 8300 mm Height: 3260 mm Depth: 1000 mm Condition: very good, second-hand

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 11 cup wheels vertical glass edging machine condtion as new with only 39536 mtrs with variable angle : 0-45° glass thikness : 3 - 30 mm min. glass size : 65 x 65 mm ( till 12 mm glass) min. glass size with variable angle 45° : 150 x 150 mm max. arris width : 5 mm Lodey D T Ayepfx Anuoac work height : 895 mm max. glass weight : 600 Kg / m machine sizes : L = 8385 x W : 1200 x H : 2900 mm weight : 4800 Kg Available : from stock .

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Ledpjzd Rqlsfx Anusac Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet table Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 76900 € 1453.41 € 1015 mm 610 mm 1.000 x 400 mm 400 x 1.000 mm 1050 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 480 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 1.800 1/min 3.75 kW 1.5 kW 1.1 kW 1.1 kW 4280 mm 2080 mm 2100 mm 3500 kg 220 kg 440 kg 355 x 50 x 127 mm mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Ljdpfx Ajwiqyaonueac Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation Ledpjwhm Rfofx Anueac - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: Lasdsyw Rhmopfx Anuoc - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), workpiece diameter 30 - 325 mm grinding depth 60 mm clamping length 1000 mm center hole 1 - 30 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Ljdpozcq Rqefx Anueac dressing unit, counter steady, grinding stones

Condition: excellent (used), Year of construction: 1998, Grinding area: 600 x 500 mm Maximum grinding height: 523 mm Grinding wheel dimensions: max. 355 x 38 mm Bore: 127 mm Speed: 1,500 rpm Maximum table load: 700 kg Machine weight: 3,500 kg Includes documentation. Lajdpfezcp R Njx Anujc Includes various grinding wheels.

Condition: new, The Cowley 150x2000 mm belt sander is a professional machine designed for sanding, smoothing, and polishing metal, wood, and plastic workpieces. Thanks to its powerful 4 kW motor and high belt speed, this sander ensures fast, precise, and efficient processing, even of large-sized workpieces. Its robust construction and reliable operation make it ideal for intensive industrial use as well as professional workshops. Features: Suitable for sanding and polishing metal, wooden, and plastic workpieces. Powerful 4 kW motor ensures continuous and efficient operation. High belt speed – 29 m/s for fast and smooth surface processing. Strong and stable construction designed for long-term and intensive use. Perfectly suited for professional workshops and industrial applications. Technical Specifications: Power supply: 400V / 50Hz Motor power: 4 kW Belt speed: 29 m/s Belt dimensions (width × length): 150 × 2000 mm Noise level: 87 dB Product Dimensions: Length: 700 mm Width: 530 mm Height: 1130 mm Weight: 90.0 kg Packaging Dimensions: Length: 850 mm Laedpfozd E S Rox Anujc Width: 550 mm Height: 1060 mm Weight: 103.0 kg

Condition: used, drill diameter 1,5 - 25 mm lip angle 40 - 180 ° 6-jaw-chucks various equipment manual included Lajdpfsd Ih Sgsx Anuec Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures)

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Ledpfx Aegbgawsnueac Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: used, Maximum grinding length: 1000 mm Maximum wheel diameter: 320 mm Bore: 30 mm Lajdpfx Anjv Taafsusc Manufacturer: TOS

Condition: good (used), Year of construction: 1986, grinding depth: 500 mm, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: Grindable diameter with workpiece protection: internal / internal 20..400 mm; Ledozd Aqwepfx Anueac external 500 mm Max. workpiece diameter with workpiece protection: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm