Used Hakomatic B 1100 for sale (9,670)

Condition: excellent (used), Year of construction: 2017, Clamping force: 230 t Screw diameter: 50 mm Distance between tie bars V: 620 mm Hodpfx Afsv Rminsisnu Distance between tie bars H: 620 mm Type: Horizontal Drive: Hybrid Machine dimension - L-6,22 m , W-1,73 m , H - 2,30 m Machine weight - 12,6 tons Injection material - 50% glass 50% polyamide

Condition: good (used), functionality: fully functional, Horizontal resaw with double saw unit. Wheels with a diameter of 1100 mm. Hnjdpfx Afew Sakroiou

Condition: excellent (used), Year of construction: 2023, Flow Rack for BMW Boxes or Northvolt Bins – used –: Ex-site price: €35,000 (net), plus dismantling, etc. Manufacturer: Jungheinrich Type: B / Flow Racks Year of Manufacture: End of 2023, system was reportedly never in operation Number of Levels: 4 Maximum Level Height: 1,350 mm Upright Profile: STD’B’18P The system consists of two blocks: Dimensions: Block 1 is approx. 15.50 m x 21 m; Block 2 is approx. 27 m x 29 m Flow levels: 5; return lanes (e.g. for empties) 3 levels Frame height: between 5.75 m and 6.50 m Frame width: 1.30 m Lane width: approx. 2.40 m or 2.10 m (Block 2) Roller conveyor accessories: Hjdpfxew Hqmbj Afijnu - Pallet separator device - Lateral centering rollers, per lane 82 pcs. / 41 pcs. per side - Propped up with profile, h = 50 mm below the separator device Configured for BMW / Northvolt bins Pallets run precisely centered. Each rack essentially has a side for full goods and a side for empties, thus in opposite directions. At Northvolt, the empties side is only suitable up to 80 kg per position, full goods nearly 500 kg. For BMW: empties 485 kg and full goods 860 kg, which is not due to load capacity but to the braking force of the brake rollers. Exact bin dimensions will be provided later. Original new price: approx. €600,000 Condition: very good Availability: immediately, must still be dismantled Location: 93055 Regensburg PDF with layouts available on request!

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Hnodpfx Aelmmwrefisu

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,559 h, load capacity: 8,000 kg, lifting height: 7,355 mm, fuel type: diesel, mast type: triplex, construction height: 3,760 mm, drive type: Diesel, Diesel Forklift ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Triplex Condition: Ready for use and fully functional Hodpfxjv Tf Uzj Afionu Technical Condition: Good Description: Camera 3rd valve, 4th valve, heating, full cab,

Condition: used, Year of construction: 2019, operating hours: 1,617 h, mast type: telescopic, fuel type: diesel, Weights Empty weight: 21.712 kg Functional Lifting capacity: 454 kg Working height: 4.315 cm Hodpfx Aew Dmwdefisnu Identification Serial number: SX135H-434 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2743 m Transport dimensions (LxWxH): 19.76x2.49x3.05 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers Hjdpew Dcdgefx Afisnu -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 7310/1100/H460 mm -Load capacity: 12 t -Tires: Continental Elastic 525/120-3 solid rubber twin tires -Dimensions total: 8380/1290/H1425 mm -Weight: 1150 kg

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Hjdewz Ic Aspfx Afijnu Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: used, axle configuration: 3 axles, first registration: 12/2010, color: other, Year of construction: 2010, Empty weight: 5.900 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Hjdpfx Afow Ekv Heijnu Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: ready for operation (used), Year of construction: 2010, A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Hnjdpfx Afjuxu Ifoieu

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,719 h, load capacity: 8,000 kg, lifting height: 3,950 mm, free lift: 1,255 mm, fuel type: diesel, mast type: triplex, construction height: 2,712 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire condition: New Hedpfx Aswfkfujfienu Rear tire condition: New Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cabin,

Condition: good (used), Year of construction: 2013, Inclined belt conveyor / belt conveyor, powered, approx. 24.73 m length, belt width 60 cm, Transnorm – used - Price per unit ex stock (net): €2,295! Manufacturer: Transnorm Year of manufacture: 2013 Section length: approx. 4.45 m curve / approx. 16.28 m / curve approx. 4 m Section width: approx. 70 cm Belt width: approx. 60 cm Height incl. feet: approx. 81 cm Section height: approx. 8 cm At least 2 motors Hnjdpswxvcrjfx Afiju Condition: good Available: immediately Location: warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 1972, pressing force: 160 t, Engine power 20 hp Hedpfx Afevi Iiasionu

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Hnjdpfx Afed Nt Rqeisu Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Year of construction: 1983, condition: used, Punching machine / label punch / gun punch Busch B works according to the push-through principle manual closing of the safety door Technical data: Max. Punching format 230 x 230 mm Hnjdpfx Aewu Duuofieu Min. punching format 10 x 10 mm Max. Insert height (punching knife height 60 mm) 170 mm Punching pressure 5,700 kg Max. punching strokes p/min 10 Max. Machine output (with 1000 sheets/80 g/m2) 600,000 sheets/h Weight 855 kg

Condition: used, Four-Side Planer Moulder SCM P64/B Specification: • Condition – after inspection, ready for operation • Manufacturer – SCM • Model – P64 • Working width – 180 mm • Working height – 120 mm • Motors on vertical spindles – 1 x 5.5 kW • Motors on horizontal spindles – 4.0 and 5.5 kW • Feed motor – 1.5 kW • Total power – 16.5 kW • Electric adjustment of planing height • Manual adjustment of planing width • 4 spindles with 35 mm diameter • 4 standard disposable-knife cutterheads 50x12x1.5 mm • Vertical profiling heads adjustable up/down (like a low-spindle shaper) Hsdpswzyc Usfx Afisnu • Long infeed table, dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • Roller pressure on springs • Worktable lubrication pump • Dust extraction nozzles ø 120 and 150 mm • Weight – approx. 1,110 kg • Overall dimensions 332 x 113 x 170 cm (length x width x height) Additional Information: • The machine is in good technical condition, ready for immediate use • The photos shown display the actual condition of the item offered for sale • The machine is available immediately

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,239 h, load capacity: 8,000 kg, lifting height: 5,905 mm, free lift: 1,905 mm, fuel type: gas, mast type: triplex, construction height: 3,362 mm, fork length: 2,200 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Hnodpjw Ncvxsfx Afieu Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cabin, twin tires,

Condition: good (used), Year of construction: 2013, Incline belt / belt conveyor, powered, approx. 5.50m length, belt width 60cm, Transnorm – used – Price per unit ex works (net): €495! Hnedpfxewxu S So Afiou Manufacturer: Transnorm Year of manufacture: 2013 Type: 1100, belt conveyor with central drive Section length: approx. 80cm / angled section 4.70m Section width: approx. 70cm Belt width / nominal width: 600mm Height incl. stand: approx. 81cm Section height: approx. 8cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony

Condition: used, mileage: 109,249 km, power: 302 kW (410.61 HP), gearing type: mechanical, fuel type: diesel, color: other, tire size: 385/65 R22.5, axle configuration: 6x6, number of seats: 2, first registration: 04/2010, emission class: euro5, suspension: other, Year of construction: 2010, Equipment: all wheel drive, crane, cruise control, differential lock, = Additional options and accessories = - Electrically adjustable door mirrors - Electrically operated windows - PTO - Radio - Toolbox = Remarks = Axles Configuration: 6x6 Crane Number of hydraulic extension: 3 Number of manual extension: 3 Number of stamp: 4 Remote control: ✓ Load hook: ✓ Capacity meter: 26,50 m Capacity kilo: 1760 kg Terex 330.2VE - A21 Crane View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = Hnodpfx Afjwzkxmoiju General information Cab: day Transmission Transmission: 6 gears, Manual gearbox Axle configuration Brakes: drum brakes Front axle: Tyre size: 385/65 R22.5; Differential lock; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80 R22.5; Double wheels; Differential lock; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 35%; Reduction: hub reduction; Suspension: trapezoid suspension Rear axle 2: Tyre size: 315/80 R22.5; Double wheels; Differential lock; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 35%; Reduction: hub reduction; Suspension: trapezoid suspension Measures Dimensions (LxBxH): 785 x 250 x 400 cm Weights Empty weight: 21.040 kg Carrying capacity: 960 kg GVW: 22.000 kg Functional Crane: Terex TLC 330.2, year of manufacture 2010, on rear of chassis Condition Number of keys: 3

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Hodpfx Aeu Ekbnofienu Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: good (used), Year of construction: 2011, Universal tipper suitable for large and tall boxes, dimensions shown in the photos. Hedpfx Afswynlbsisnu

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,823 h, load capacity: 8,000 kg, lifting height: 3,955 mm, free lift: 1,255 mm, fuel type: diesel, mast type: triplex, construction height: 2,712 mm, drive type: Diesel, Diesel Forklift ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Sideshift, fork positioner, Hodpfxownz T Io Afienu 3rd valve, 4th valve, heating, full cab,

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Hnsdpfxoum Unto Afiju Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Hjdod Rcigjpfx Afisnu Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Hodpfxjwbp Nwe Afisnu N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80